summaryrefslogtreecommitdiff
path: root/board/bosch
AgeCommit message (Collapse)Author
2025-08-08MAINTAINERS: update email address of Heiko SchocherHeiko Schocher
use the new email address for community work. While at it, cleanup git shortlog output, by adding fixes in .mailmap Signed-off-by: Heiko Schocher <hs@nabladev.com>
2025-06-02global: Cleanup usage of "ETH_ALEN"Tom Rini
The value of "ETH_ALEN" is defined to 6 in <linux/if_ether.h>. This file is included in <net.h>. In the places where we had ETH_ALEN but no direct include of <net.h>, add <linux/if_ether.h>. In the places where we had a custom name used, make use of ETH_ALEN instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2025-06-02include/mtd.h: Cleanup usageTom Rini
There are only a few things found in <mtd.h> today. Go through and audit the C files which include <mtd.h> and remove it when not required. Then, add it to the files which had either missed it or had an indirect inclusion of it. Signed-off-by: Tom Rini <trini@konsulko.com>
2025-04-11Kbuild: Always use $(PHASE_)Tom Rini
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our Makefiles as part of the macros to determine when to do something in our Makefiles based on what phase of the build we are in. For consistency, bring this down to a single macro and use "$(PHASE_)" only. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-11global: Rename SPL_ to XPL_Simon Glass
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is no-longer set. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-11board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILDSimon Glass
Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass <sjg@chromium.org>
2024-08-09board: shc: convert to DM_I2CAnatolij Gustschin
Conversion to DM_I2C is mandatory, rework to remove use of legacy I2C API. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2024-08-06am33xx: Use regular spl_board_init instead of am33xx_spl_board_initPaul Kocialkowski
The am33xx_spl_board_init function was introduced as a way to add board-specific SPL init for AM33xx devices since the spl_board_init function was already used for SoC-specific init. Now that the SoC-specific SPL init was moved to spl_soc_init, we can use spl_board_init for this purpose and get rid of am33xx_spl_board_init. Rename the function in board files and enable the related config option for concerned boards. Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Reviewed-by: Tom Rini <trini@konsulko.com>
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-06board: bosch: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this board vendor directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-22common: Convert *.c/h from UTF-8 to ASCII enconfingMichal Simek
Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <kabel@kernel.org>
2023-11-10tree-wide: Replace http:// link with https:// link for ti.comNishanth Menon
Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-09treewide: rework linker symbol declarations in sections headerShiji Yang
1. Convert all linker symbols to char[] type so that we can get the corresponding address by calling array name 'var' or its address '&var'. In this way, we can avoid some potential issues[1]. 2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has not been referenced by any source code. 3. Move '__data_end' to the arch x86's own sections header as it's only used by x86 arch. 4. Remove some duplicate declared linker symbols. Now we use the standard header file to declare them. [1] This patch fixes the boot failure on MIPS target. Error log: SPL: Image overlaps SPL Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-06-12Merge tag 'xilinx-for-v2023.10-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2023.10-rc1 global: - Use proper U-Boot project name Fix sparse warnings in zynqmp-clk, zynqmp handoff, board cmd: - Cover incorrect 0 length entries Versal NET: - Add bootmode logic - Support SPP production version - Add loadpdi command ZynqMP: - Clear pmufw node command ID handling - Change power domain behavior around zynqmp_pmufw_node() - Fix zynqmp cmd return values and pmufw command - Fix R5 tcm init and modes mmc: - Sync Versal NET emmc DT binding pcie: - Add support for ZynqMP PCIe root port video: - Add support for ZynqMP DP tools: - Fix debug message in relocate-rela
2023-06-12global: Use proper project name U-BootMichal Simek
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-05-16imx6q: acc: Remove misuse of env is nowhere driverStefan Herbrechtsmeier
When using a list of writeable variables, the initial values come from the built-in default environment since commit 5ab81058364b ("env: Complete generic support for writable list"). Remove unnecessary misuse of the env is nowhere driver as default environment. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
2023-03-22arm: Correct cpu_reset function prototype on some platformsTom Rini
Some platforms were not including <cpu_func.h> which sets the prototype for reset_cpu, and in turn had it set wrong. Correct these cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop CONFIG_AM335X_LCDSimon Glass
This relies on the old LCD implementation which is to be removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-20bosch: Add initial board support for ACCPhilip Oberfichtner
The Bosch ACC (Air Center Control) Board is based on the i.MX6D. The device tree is copied from Linux, see [1]. The only difference compared to the Linux DT is the removal of usbphynop properties. They are defined in the Linux version of imx6qdl.dtsi, but not in the u-boot version. [1] Commit 6192cf8ac082 from git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-09am335x, guardian: Drop non DM_I2C codeGireesh Hiremath
On this platform DM_I2C and SPL_DM_I2C enabled. Remove legacy code. Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-04-28led: Drop led_default_state()Marek Vasut
This function is empty, drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Steven Lawrance <steven.lawrance@softathome.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespaceTom Rini
The omap24xx I2C driver uses its own CONFIG namespace for common I2C variables. Rather than convert more of them to Kconfig, rename these to the common I2C ones and remove the entirely unused functionality. As part of this, we make the am335x_shc platforms consistent with their intended speed values. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30arm: shc: Change CONFIG_SYS_I2C_EEPROM_ADDR to EEPROM_ADDRTom Rini
The shc platforms do not make use of the rest of the EEPROM infrastructure. Rather than make more elaborate Kconfig logic, remove this setting from the CONFIG namespace. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-15am335x, guardian: Enable panel driver Himax HX8238DGireesh Hiremath
- Enable lcd controller - Display splash screen Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-16-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: Enable backlightGireesh Hiremath
Enable backlight, set brightness value and dimming frequency Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-13-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: update swi logicGireesh Hiremath
read boot mode gpio and set the swi status Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-12-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: code cleanup and boot optimizationGireesh Hiremath
- remove redundant headers and boot modes from board file Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-9-Gireesh.Hiremath@in.bosch.com
2021-07-15am335x, guardian: mem: Add board dependent mem valuesMoses Christopher
- Add mem-guardian.h derived from am33xx/mem.h * Add GPMC config values optimized for Bosch Guardian Board * NAND Chip used by Bosch Guardian Board is Micron MT29F4G08ABBFA Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210611161350.2141-3-Gireesh.Hiremath@in.bosch.com
2021-07-07bootstage: Eliminate when not enabledTom Rini
When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-24treewide: Convert macro and uses of __section(foo) to __section("foo")Marek Behún
This commit does the same thing as Linux commit 33def8498fdd. Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02reset: Remove addr parameter from reset_cpu()Harald Seiler
Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-12am335x, guardian: update the maintainer listMoses Christopher
I am leaving Bosch, so replacing myself with Gireesh Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop bootstage.h from common headerSimon Glass
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-14am335x, guardian: boot stage feedback in headless modeMoses Christopher
This patch enables the guardian board to provide feedback about the boot stage in headless mode. The on-board led would behave in the following pattern * U-boot -> GLOW LED * Linux -> BLINK LED [HEART-BEAT PATTERN] Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-11am335x, guardian: update guardian boardMoses Christopher
- add BOARD_LATE_INIT function calls in board.c - add swi_status detection in board.c - mux: add guardian interfaces to single pinmux structure - am33xx, kconfig: add BOARD_LATE_INIT for GUARDIAN board Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.0.4) at 2026-02-03 01:52:03 +0000