| Age | Commit message (Collapse) | Author |
|---|
|
The loop in the icicle implementation of board_fit_config_name_match()
runs strtok() to split off the vendor portion of the compatible string
using , as the delimiter. strtok() modifies a string in place, so where
the first config and compatible do not match, the compatible has been
modified by the time the loop hits the second iteration.
Since stringlists in dt land are null separated strings, the nulls
strtok() inserts to replace the delimiter increase the number of strings
in the compatible list. When the second iteration of the loop calls
fdt_stringlist_get(), it gets the vendorless portion of the first
compatible string, rather than the second compatible string. Copy each
compatible before calling strtok() to avoid this problem.
The temporary string the compatible is copied to is statically
allocated, as attempts to dynamically allocate it at this stage of boot
were met with "alloc space exhausted" errors.
Fixes: 7c16ebba1ed ("board: mpfs_icicle: implement board_fdt_blob_setup()/board_fit_config_name_match()")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
board_fdt_blob_setup()/board_fit_config_name_match()
The firmware on the Icicle is capable of providing a devicetree in a1 to
U-Boot, but until now the devicetree has been packaged in a "payload" [1]
alongside U-Boot (or other bootloaders/RTOSes) and appended to the image.
The address of this appended devicetree is placed in a1 by the firmware.
This meant that the mechanism used by OF_SEPARATE to locate the
devicetree at the end of the image would pick up the one provided by the
firmware when u-boot-nodtb.bin was in the payload and U-Boot's devicetree
when u-boot.bin was.
The firmware is now going to be capable of providing a minimal devicetree
(quite cut down due to severe space constraints), but this devicetree is
linked into the firmware that runs out of the L2 rather than at the end
of the U-Boot image.
Implement board_fdt_blob_setup() so that this devicetree can be
optionally used, and the devicetree provided in the "payload" can be
used without relying on "happening" to implement the same strategy as
OF_SEPARATE expects in combination with u-boot-nodtb.bin.
Unlike other RISC-V boards, the firmware provided devicetree is only
used when OF_BOARD is set, so that the almost certainly more complete
devicetree in U-Boot will be used unless explicitly requested otherwise.
Implement board_fit_config_name_match(), so that, using the firmware
provided cut-down/minimal dtb, U-Boot can select one of several
devicetrees when MULTI_DTB_FIT is enabled.
Enabling both MULTI_DTB_FIT and OF_BOARD will lead to a conflict
between the two options, with the latter taking priority due to
board_fdt_blob_setup() being executed before board_fit_config_name_match(),
which causes gd->fdt_blob to be overwritten with a pointer to the
minimal devicetree rather than the location of the fit image containing
the multiple dtbs. Let MULTI_DTB_FIT take priority in this case, by
explicitly blocking the override when MULTI_DTB_FIT is enabled.
Link: https://github.com/polarfire-soc/hart-software-services/blob/master/tools/hss-payload-generator/README.md [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Prepare v2024.070-rc4
|
|
A given AMP configuration for a board may make either one, or neither
of, the ethernet ports available to U-Boot. The Icicle's init code will
fail if mac1 is not present, so move it to the optional approach taken
for mac0.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Node offsets returned by libfdt can contain negative error numbers, so
the variable type should be "int". As things stand, if the ethernet
nodes are not found in the early init callback, the if (node < 0) tests
pass and the code errors out while trying to set the local-mac-address
for a non-existent node.
Fixes: 64413e1b7c ("riscv: Add Microchip MPFS Icicle Kit support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The dts sync from Linux leaves mac0/ethernet1 enabled on icicle, but
U-Boot does not currently set a mac address for it. Expand on the code
which currently sets the mac for mac1/ethernet0 to optionally set the
mac address for the second ethernet.
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
This patch updates Microchip MPFS Icicle Kit support. For now,
add Microchip I2C driver, set environment variables for
mac addresses and default build for SBI_V02.
Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This patch adds Microchip MPFS Icicle Kit support. For now, only
NS16550 Serial, Microchip clock, Cadence eMMC and MACB drivers are
enabled. The Microchip MPFS Icicle defconfig by default builds
U-Boot for S-Mode because U-Boot on Microchip PolarFire SoC will run
in S-Mode as payload of HSS + OpenSBI.
Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
|
|
Move this uncommon header out of the common header.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This patch adds Microchip MPFS Icicle board support.
For now, NS16550 serial driver is only enabled.
The Microchip MPFS Icicle defconfig by default builds
U-Boot for M-Mode with SMP support.
Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
|
