| Age | Commit message (Collapse) | Author |
|---|
|
Wadim Egorov <w.egorov@phytec.de> says:
Update Kconfig options for phyCORE-AM62Ax to align with other boards and
prepare common board code for the upcoming phyCORE-AM62L which has the
SoM EEPROM connected on a different bus.
Link: https://lore.kernel.org/r/20250815111051.2277173-1-w.egorov@phytec.de
|
|
Use CONFIG_PHYTEC_EEPROM_BUS instead of the hard coded value for the i2c bus.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Making the setup_mac_from_eeprom optional for boards without
CONFIG_PHYTEC_SOM_DETECTION_BLOCKS.
Signed-off-by: John Ma <jma@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Factor out the mac address setup into setup_mac_from_eeprom().
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Factor out boot device detection from board_late_init() into a new
boot_targets_setup() helper.
Adjust the boot_targets environment variable to favor the device we
just booted from. If boot_targets is still at its default value,
prepend the current boot device to the list; otherwise leave any
user-customized order untouched.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Now that capsule update sets the dfu_alt_info environment variable
explicitly, there is no need to support it in the set_dfu_alt_info()
function. Decouple SET_DFU_ALT_INFO from EFI_CAPSULE_FIRMWARE_FIT and
EFI_CAPSULE_FIRMWARE_RAW. For many boards, this was the only use of
set_dfu_alt_info() so remove the function entirely.
Fixes: a9e6f01a941f ("efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for board/libre-computer/*
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de> # for
|
|
This function is only used in the board.c file. Make it static.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Call 'phytec_ft_board_fixup' in the common K3 board code
to expose the product name and part number to Linux.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
|
|
We set the boot source as environment variable 'boot'.
Also include 'uart' and 'usbdfu' as possible boot sources.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Garrett Giordano <ggiordano@phytec.com> says:
This patch set adds the phyCORE AM62Ax board support and documenation to
u-boot.
The phyCORE-AM62Ax is a SoM (System on Module) featuring TI's AM62Ax SoC. It can
be used in combination with different carrier boards. This module can come
with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs
from the AM62x family.
A development Kit, called phyBOARD-Lyra is used as a carrier board reference
design around the AM62x SoM.
This series depends on the following two patches:
- [PATCH v2] arm: mach-k3: am62a7: Provide a way to obtain boot device for non SPL
https://lists.denx.de/pipermail/u-boot/2024-October/570156.html
- [PATCH] board: phytec: common: Introduce CONFIG_PHYTEC_K3_DDR_PATCH
https://lists.denx.de/pipermail/u-boot/2024-November/571543.html
Link: https://lore.kernel.org/r/20241118231606.3161665-1-ggiordano@phytec.com
[trini: Fix warning in board/phytec/common/k3/board.c when
CONFIG_EFI_HAVE_CAPSULE_SUPPORT is not enabled]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Wadim Egorov <w.egorov@phytec.de> says:
This implements capsule updates for all our K3 SoMs for
eMMC, OSPI NOR and uSD cards.
We can use capsule updates to update the bootloader on all our
supported flash devices.
Link: https://lore.kernel.org/r/20241127121736.1525948-1-w.egorov@phytec.de
|
|
Implement EFI capsule update functionality for PHYTEC K3-based SoMs.
These SoMs feature various flash device options, including eMMC,
OSPI NOR, and uSD card at the board level.
This update provides the necessary logic to enable EFI capsule updates
across all three flash devices, ensuring flexible and robust firmware
upgrade capabilities.
The GUID is dynamically generated for the board, to get it:
efidebug capsule esrt
========================================
ESRT: fw_resource_count=3
ESRT: fw_resource_count_max=3
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=C7D64D6D-10B2-54BC-A3BF-06A9DC3653D9
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
[entry 1]==============================
ESRT: fw_class=09841C3F-F177-5D57-B1F6-754D92879205
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
[entry 2]==============================
ESRT: fw_class=D11A9016-515E-503A-8872-3FF65384D0C4
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the board (from uSD card containing capsule binaries at boot):
load mmc 1:1 $loadaddr tiboot3-capsule.bin
efidebug capsule update $loadaddr
load mmc 1:1 $loadaddr tispl-capsule.bin
efidebug capsule update $loadaddr
load mmc 1:1 $loadaddr uboot-capsule.bin
efidebug capsule update $loadaddr
The binaries will be flashed to the flash device you are booted from.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Introduce CONFIG_PHYTEC_K3_DDR_PATCH to make DDR timing patch code
optional for PHYTEC K3 boards. This allows better control over which
boards receive DDR timing patches, rather than compiling the code for
all boards with K3_DDRSS enabled.
Also enable the feature by default for PHYCORE_AM62X_R5.
Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Our SoMs are available in multiple configurations, managed via device
tree overlays. To determine the specific variant in use, we read the
EEPROM and apply the appropriate overlays during boot to the device tree
used by the OS.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Add and use the correct number of ddr phy registers to update the
corresponding settings.
Fixes: cbf5c99ef317 ("board: phytec: common: Introduce a method to inject DDR timings deltas")
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Copy fixed-partitions nodes from U-Boot device tree to OS device tree.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
|
|
deltas ***"
Wadim Egorov <w.egorov@phytec.de> says:
Changes in v2:
- Reabse to current next
- Add Tested-by: John Ma <jma@phytec.com>
- Add Kconfig option to select RAM size statically
- Make board/phytec/common/k3 always compile for CONFIG_ARCH_K3
v1: https://lists.denx.de/pipermail/u-boot/2024-May/553057.html
|
|
Introduce fdt_apply_ddrss_timings_patch() to allow board code to
override DDR settings in the device tree prior to DDRSS driver probing.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: John Ma <jma@phytec.com>
|
|
Read the EEPROM API v3 content and set all available
MAC-Addresses to the environment.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Environment handling code can be reused across all our K3 based SoMs.
Instead of adding the same code for every new SoM, move it to a common
board.c file.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
