| Age | Commit message (Collapse) | Author |
|---|
|
This commit adds an FDT entry for the d0 stepping of the BCM2712 SoC.
This entry is used by the v1.1 revision of the board
(revision & 0x0f == 1).
Signed-off-by: Filip Kokosiński <filip.kokosinski@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
|
|
This patch adds support for multiple FDT files per board model. This is
done by adding the FDTFILES macro, which initializes two rpi_model
struct members: fdtfiles and fdtcount.
The new-style revision codes designate LSB bits as board revision; this
value is used to choose between provided FDTs. The first element of the
fdtfiles list is used should no revision match.
Signed-off-by: Filip Kokosiński <filip.kokosinski@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
|
|
Pass the VC logs DT parameter through to the kernel
device tree. This is used by the vclog tool and is
a useful debugging tool.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Matthias Brugger <mbrugger@suse.com>
|
|
The VideoCore mailbox GET_ARM_MEMORY only reports the size of the
first accessible memory region (~947 MiB on RPi4 with 8GB), not the
total RAM. This causes U-Boot to display "DRAM: 947 MiB (total 7.9 GiB)"
instead of "DRAM: 7.9 GiB".
On Raspberry Pi 4 with 8GB RAM, the memory is split across multiple
non-contiguous banks. The dram_init() function only sets gd->ram_size
to the first bank size reported by the VideoCore firmware, while
fdtdec_setup_memory_banksize() correctly populates all memory banks
from the device tree.
Fix this by updating gd->ram_size after dram_init_banksize() has
populated all memory banks, so it reflects the actual total RAM
across all banks.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
The fdt_addr variable is used in extlinux as a fallback devicetree if
none is provided by the boot command. Otherwise the only use in U-Boot
seems to me efi_install_fdt() when the internal FDT is required.
The existing mechanism uses the devicetree provided to U-Boot, but in
its original, unrelocated position. In my testing on an rpi_4, this ends
up at 2b35ef00 which is not a convenient place in memory, if the ramdisk
is large.
U-Boot already deals with this sort of problem by relocating the FDT
to a safe address.
So use the control-FDT address instead.
Remove the existing comment, which is confusing, since the FDT is not
actually passed unmodified to the kernel: U-Boot adds various things
using its FDT-fixup mechanism.
Note that board_get_usable_ram_top() reduces the RAM top for boards with
less RAM. This behaviour is left unchanged as there is no other
mechanism for U-Boot to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org> # CM4 1G
|
|
Tom reports that adding more Kconfig options fails with
board/raspberrypi/rpi/lowlevel_init.o: in function `save_boot_params':
board/raspberrypi/rpi/lowlevel_init.S:20:(.text+0x0):
relocation truncated to fit: R_AARCH64_ADR_PREL_LO21
against symbol `fw_dtb_pointer' defined in .data section
in board/raspberrypi/rpi/rpi.o
make: *** [Makefile:2029: u-boot] Error 1
Since fw_dtb_pointer lives in .data it might end up above the
+-1MB that adr can reach.
So switch over to adrp+add which has a +-4gb reach.
Reported-by: Tom Rini <trini@konsulko.com>
Closes: https://source.denx.de/u-boot/custodians/u-boot-raspberrypi/-/issues/2
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
The existing values don't provide for decompressing an arm64 boot-image.
Add those values and move things apart a bit so that a 50MB kernel can be
accommodated.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org> # CM4 1G
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org> # CM4 1G
|
|
These are not needed now since there is a bootm_size setting to keep
things within the lower part of memory.
Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org> # CM4 1G
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org> # CM4 1G
|
|
Set this option so that all boot images stay within the bottom 512MB of
memory. This should allow us to drop the fdt_high and initrd_high
options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org> # CM4 1G
|
|
Raspberry firmware prepares the FDT blob in memory at an address
that depends on both the memory size and the blob size [1].
After commit ade243a211d6 ("rpi: passthrough of the firmware provided FDT
blob") this FDT is passed to kernel through fdt_addr environment variable,
handled in set_fdt_addr() function in board file.
When u-boot environment is persistently saved, if a change happens
in loaded FDT (e.g. for a new overlay applied), firmware produces a FDT
address different from the saved one, but u-boot still use the saved
one because set_fdt_addr() function does not overwrite the fdt_addr
variable. So, for example, if there is a script that uses fdt commands for
e.g. manipulate the bootargs, boot hangs with error
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Removing the fdt_addr variable in saved environment allows to boot.
With this patch set_fdt_addr() function always overwrite fdt_addr value.
[1] https://www.raspberrypi.org/forums//viewtopic.php?f=107&t=134018
Signed-off-by: Mauro Salvini <m.salvini@koansoftware.com>
Cc: Cédric Schieli <cschieli@gmail.com>
Cc: Matthias Brugger <mbrugger@suse.com>
|
|
rpi5 firmware sets uart_clk clock-frequency in
the firmware and patches it to the DT, copy it
over when loading a new DT.
Signed-off-by: Bruno Leite <brule@prevas.dk>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
|
|
Use acpi_update_checksum() to update table header.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
|
|
The firmware sets local-bd-address, copy it when loading a new DT.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
|
The /chosen/user-warnings property is created by the RPi firmware if
there are warnings to report, keep it to make debugging easier.
For example, if the firmware config.txt contains
"dtoverlay=error-example" and that example references an undefined
symbol "&nosuchdev" the warning can be read after boot:
$ cat /proc/device-tree/chosen/user-warnings
dterror: can't find symbol 'nosuchdev'
Failed to resolve overlay 'error-example'
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
|
The functions fdt_simplefb_add_node and fdt_simplefb_enable_and_mem_rsv
are only available if CONFIG_FDT_SIMPLEFB is enabled.
Signed-off-by: Martin Stolpe <martin.stolpe@gmail.com>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
|
The Raspberry Pi foundation have released the Raspberry
Pi 500, CM5 an CM5 lite devices so add the assoicated
revision identifers so we can detect them.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Matthias Brugger <mbrugger@suse.com>
|
|
Prepare v2025.01-rc5
|
|
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.
No yaks were harmed in this change, but there is a very small code-size
reduction.
For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Since RPI works well using EFI and has no size limitations with regards
to U-Boot, add the needed structures to support capsule updates.
While at it update the most commonly used defconfigs and include capsule
support and U-Boot commands needed by EFI
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
For a lot of usecases, such as display, camera, media
the Raspberry Pi needs a lot more CMA than distros
configure as default so we should pass this parameter
through so things work as expected. Fix a spelling
mistake while we're at it.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Matthias Brugger <mbrugger@suse.com>
|
|
Add the necessary DSDT files copied from tianocore to boot the RPi4.
In addition generate a board specific SSDT to dynamically enable/disable
ACPI devices based on FDT. This is required to support the various variants
and boot options. It also allows to test the code on QEMU 9.0 without
modifications, since it doesn't emulate PCIe yet.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi
Updates for RPi for 2024.10:
- board: rpi: remove leftover CONFIG_HW_WATCHDOG block
- arm: bcm283x: remove unused empty hw_watchdog_disable
- board: raspberrypi: Fix format specifier for printing rev_scheme
- Revert "arm: dts: bcm283x: Add minimal smbios information"
|
|
This was added in commit 45a6d231b2f (bcm2835_wdt: support for the
BCM2835/2836 watchdog), which did do 'select HW_WATCHDOG'. That
incarnation of the watchdog driver later got removed in
c7adc0b5f98 (watchdog: bcm2835_wdt: Remove unused BCM283x watchdog
driver and its references), but this block was left behind.
Another rpi watchdog driver has since been added, but that does not
select HW_WATCHDOG, so this remains dead and unused. Remove it.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
rev_scheme is an unsigned integer and must not be printed
as a signed integer.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Firmware on RPi5 return error on board revision query
through firmware interface, but on the other hand it fills
"linux,revision" in "system" node, so use it to detect board
revision.
system {
linux,revision = <0xc04170>;
linux,serial = <0x6cf44e80 0x3c533ede>;
};
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Tested-by: Jens Maus <mail@jens-maus.de>
Tested-by: Darko Alavanja <darko.alavanja@konsulko.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
Use the new environment format so we can drop most of the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
board_get_usable_ram_top() returns a physical address that is stored in
gd->ram_top. The return type of the function should be phys_addr_t like the
current type of gd->ram_top.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
When raspberrpi-4b platform boots up, there are 2 sets of same bootup
log displayed on HDMI monitor screen, it looks like the screen is split
into 2 parts. The root cause is that video format of u-boot is different
from kernel. The fixing "a8r8g8b8" video format is used in u-boot, but
"r5g6b5" video format from framebuffer node is used in kernel image. In
order to avoid weird display status on screen, it needs to set the correct
parameter for simple framebuffer node even if it has existed.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
|
|
Update the Raspberry Pi Zero 2W device tree file
name to match what landed upstream.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
|
Some Raspberry Pi 400 boards, specifically rev 1.1, have a different
address for the ethernet PHY device than what is provided by the kernel
DTB. The correct address is provided by the firmware, so we should carry
it over into the loaded device tree so that ethernet works on such boards.
Signed-off-by: Antoine Mazeas <antoine@karthanis.net>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
|
The RPI firmware adjusts several property values in the dtb it passes
to u-boot depending on the board/SoC revision. Inherit some of these
when u-boot loads a dtb itself. Specificaly copy:
* /model: The firmware provides a more specific string
* /memreserve: The firmware defines a reserved range, better keep it
* emmc2bus and pcie0 dma-ranges: The C0T revision of the bcm2711 Soc (as
present on rpi 400 and some rpi 4B boards) has different values for
these then the B0T revision. So these need to be adjusted to boot on
these boards
* blconfig: The firmware defines the memory area where the blconfig
stored. Copy those over so it can be enabled.
* /chosen/kaslr-seed: The firmware generates a kaslr seed, take advantage
of that.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Antoine Mazeas <antoine@karthanis.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
|
Peter accpeted to step up as a co-maintainer for the RPis.
Reflect that in the corresponding MAINTAINERS files.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
This file is being removed so drop remaining references to it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Commit 37dc958947ed ("global_data.h: Change ram_top type to phys_addr_t")
changed type of ram_top member from ulong to phys_addr_t but did not
changed types in board_get_usable_ram_top() function which returns value
for ram_top.
So change ulong to phys_addr_t type also in board_get_usable_ram_top()
signature and implementations.
Fixes: 37dc958947ed ("global_data.h: Change ram_top type to phys_addr_t")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Prepare v2022.01-rc4
|
|
Rename the function named lcd_dt_simplefb* to fdt_simplefb* to be aligned
with the associated file name fdt_simplefb.h/fdt_simplefb.c
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
|
|
The Raspberry Pi Foundation released the new Zero 2 W which we
want to detect, so we can detect the correct device tree file name.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
The Raspberry Pi Foundation has updated their documentation so update
the URL to the latest place to find the HW device revision codes.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
OF_HOSTFILE is used on sandbox configs only. Although it's pretty
unique and not causing any confusions, we are better of having simpler
config options for the DTB.
So let's replace that with the existing OF_BOARD. U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Prepare v2021.10-rc5
|
|
It appears that RPi firmware has already added framebuffer
node under /chosen, at least on RPi 2 versions. So check
for this and don't add duplicate node.
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and
stemmy, disable ATAG support. A large number of platforms had enabled
support but never supported a kernel so old as to require it. Further,
some platforms are old enough to support both, but are well supported by
devicetree booting, and have been for a number of years. This is
because some of the ATAGs related functions have been re-used to provide
the same kind of information, but for devicetree or just generally to
inform the user. When needed still, rename these functions to
get_board_revision() instead, to avoid conflicts. In other cases, these
functions were simply unused, so drop them.
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Stefan Bosch <stefan_b@posteo.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The Raspberry Pi Foundation released the new Compute Module 4 which we
want to detect, so we can enable Ethernet on it and know the correct
device tree file name.
Note that this sets the Ethernet option to true since the official CM4
IO board has an Ethernet port. But that might not be the case when using
custom ones.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
The Raspberry Pi Foundation released the new RPi400 which we want to
detect, so we can enable Ethernet on it and know the correct device tree
file name.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
When RPi4 is booted from USB Mass Storage, the firmware reports 947MiB of
the ARM memory (948 in case of the standard SD-card boot). This value is
not MMU_SECTION_SIZE aligned, so the dram_bank_mmu_setup() skips mapping
of the last 1MiB. This later causes u-boot in ARM 32bit mode to freeze,
because it relocated itself into that unmapped memory and fails to
execute.
Fix this by limiting the size of the first bank to the multiple of
MMU_SECTION_SIZE.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:
It's a **mistake** to use typedef for structures and pointers.
Besides, using typedef for structures is annoying when you try to make
headers self-contained.
Let's say you have the following function declaration in a header:
void foo(bd_t *bd);
This is not self-contained since bd_t is not defined.
To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>
#include <asm/u-boot.h>
void foo(bd_t *bd);
Then, the include direcective pulls in more bloat needlessly.
If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:
struct bd_info;
void foo(struct bd_info *bd);
Right, typedef'ing bd_t is a mistake.
I used coccinelle to generate this commit.
The semantic patch that makes this change is as follows:
<smpl>
@@
typedef bd_t;
@@
-bd_t
+struct bd_info
</smpl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Virtually all callers of this function do the rounding on their own.
Some do it right, some don't. Instead of doing this in each caller,
do the rounding in efi_add_memory_map(). Change the size parameter
to bytes instead of pages and remove aligning and size calculation in
all callers.
There is no more need to make the original efi_add_memory_map() (which
takes pages as size) available outside the module. Thus rename it to
efi_add_memory_map_pg() and make it static to prevent further misuse
outside the module.
Signed-off-by: Michael Walle <michael@walle.cc>
Add missing comma in sunxi_display.c.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
