| Age | Commit message (Collapse) | Author |
|---|
|
Options which deal with memory locations and have a default value of 0x0
are dangerous, as that is often not a valid memory location. Rework
SPL_LOAD_FIT_ADDRESS as follows:
- Add SPL_HAS_LOAD_FIT_ADDRESS to guard prompting the question as the
case of loading a FIT image does not strictly require setting an
address and allows for a malloc()'d area to be used.
- For SPL_RAM_SUPPORT, select the new guard symbol if SPL_LOAD_FIT is
enabled because in that case an address must be provided.
- Update defconfigs for these new changes. Largely this means some
defconfigs need to enable SPL_HAS_LOAD_FIT_ADDRESS to maintain their
current status. In the case of sandbox, we also need to set
SPL_LOAD_FIT_ADDRESS to 0x0.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The code depends on set_avendor_bootimg_addr and set_abootimg_addr
functions which are only defined in cmd/abootimg.c, only built when
CMD_ABOOTIMG=y so let's add a dependency.
It should be "depends on" to be properly implemented, but we get a
circular dependency otherwise:
boot/Kconfig:566:error: recursive dependency detected!
boot/Kconfig:566: symbol BOOTMETH_ANDROID depends on CMD_ABOOTIMG
cmd/Kconfig:504: symbol CMD_ABOOTIMG depends on ANDROID_BOOT_IMAGE
boot/Kconfig:7: symbol ANDROID_BOOT_IMAGE is selected by BOOTMETH_ANDROID
so instead we do a select. It is safe because CMD_ABOOTIMG depends on
ANDROID_BOOT_IMAGE which we select here as well.
Fixes: 125d9f3306ea ("bootstd: Add a bootmeth for Android")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20251218-bootmeth_android-deps-v1-1-0113c804f951@cherry.de
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
This series from Andrew Davis <afd@ti.com> makes a number of the TI K3
CONFIG symbols have consistent values in SPL, as they are things
determined by the SoC and not the board design.
Link: https://lore.kernel.org/r/20251208190635.2044082-1-afd@ti.com
|
|
These are common for all K3 based boards. Add the common values as
defaults and remove from each board defconfig
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
VPL_FIT_FULL_CHECK currently shares its description and help text with
FIT_FULL_CHECK which is quite confusing, so let's specify this applies
to VPL.
Fixes: 4218456b3fac ("vbe: Add Kconfig options for VPL")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
The prompt wrongly specifies this applies to SPL while this symbol is
for VPL, let's fix this oversight.
Fixes: 8dfbd798122b ("boot: Allow use of FIT in TPL and VPL")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
The prompt currently doesn't specify this applies to the SPL stage only,
so let's fix this oversight.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
The prompt is missing the indication this applies for the SPL loading
a FIT image, and not any other stage.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: xypron.glpk@gmx.de
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776
Highlights:
*
SPL / MMC:
o
Fix Kconfig handling for
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
o
Correct raw sector calculations and respect explicit sector values
when loading U-Boot from MMC in SPL
o
Adjust raw MMC loading logic for SoCFPGA platforms
*
EFI boot:
o
Permit EFI booting on SoCFPGA platforms
o
Disable mkeficapsule tool build for Arria 10 where unsupported
*
Agilex5:
o
Upgrade SDHCI controller from SD4HC to SD6HC
o
Enable MMC and Cadence SDHCI support in defconfig
o
Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
o
Revert incorrect GPIO configuration for SDIO_SEL
o
Refine U-Boot DT handling for SD and eMMC boot variants
*
SPI:
o
Allow disabling the DesignWare SPI driver in SPL via Kconfig
*
Board / configuration fixes:
o
Enable random MAC address generation for Cyclone V
o
Fix DE0-Nano-SoC boot configuration
o
Remove obsolete or conflicting options from multiple legacy
SoCFPGA defconfigs
|
|
The BootROM in Rockchip SoCs will enter maskrom mode when boot firmware
cannot be found in nand/spi/mmc storage.
In maskrom mode the USB OTG port can accept one of two custom commands.
Initially a 0x471 command to load TPL into SRAM. After TPL has been
executed and it has returned back-to-BROM, a 0x472 command to load SPL
into start of DRAM.
Add two binman images that can be used to RAM boot from maskrom mode:
- u-boot-rockchip-usb471.bin that contains TPL to init DRAM.
- u-boot-rockchip-usb472.bin that contains SPL and the normal FIT
payload with i.e. U-Boot proper, TF-A and FDT.
A config fragment rockchip-ramboot.config can be used to enable building
of these two binman images, e.g.:
make generic-rk3588_defconfig rockchip-ramboot.config
These binman images can be used with the proprietary rkbin boot_merger
tool to create a special loader image that can be used with tools such
as rkdeveloptool or rockusb tools to RAM boot from maskrom, e.g.:
Create loader image:
$ ../rkbin/tools/boot_merger ./RK3588MINIALL.ini
Boot from maskrom:
$ rkdeveloptool db u-boot-rockchip-rk3588-loader.bin
or
$ rockusb download-boot u-boot-rockchip-rk3588-loader.bin
Another option that does not require use of proprietary tools is using
open source tools such as rkflashtool or rkusbboot that can load the
binman images directly without any need to first create a special loader
image to RAM boot from maskrom, e.g.:
$ rkflashtool l < u-boot-rockchip-usb471.bin
$ rkflashtool L < u-boot-rockchip-usb472.bin
or
$ rkusbboot u-boot-rockchip-usb471.bin u-boot-rockchip-usb472.bin
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Arnaud Patard <arnaud.patard@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Heiko Schocher <hs@nabladev.com> says:
Add SM3 secure hash, as specified by OSCCA GM/T 0004-2012 SM3 and described
at https://datatracker.ietf.org/doc/html/draft-sca-cfrg-sm3-02
TPMv2 defines hash algo sm3_256, which is currently
not supported and prevented TPMv2 chip with newer
firmware to work with U-Boot. Seen this on a ST33TPHF2XI2C
u-boot=> tpm2 init
u-boot=> tpm2 autostart
tpm2_get_pcr_info: too many pcrs: 5
Error: -90
u-boot=>
Implement sm3 hash, so we can fix this problem.
Link: https://lore.kernel.org/r/20251118043042.27726-1-hs@nabladev.com
|
|
add the U-Boot specific parts for the SM3 hash
implementation:
Signed-off-by: Heiko Schocher <hs@nabladev.com>
|
|
Quentin Schulz <foss+uboot@0leil.net> says:
While historically signature verification is mostly done for FIT such
FIT_SIGNATURE dependency for signature algorithm makes sense, it isn't
the only kind of file we can verify signatures of. It can also be done
manually with rsa_verify_hash() with an embedded public key.
Considering the impacted code is guarded by RSA_VERIFY, let's make the
symbol depend on that otherwise selecting it without RSA_VERIFY won't do
anything. The FIT_SIGNATURE dependency wasn't also enough before as it
only implied RSA_VERIFY.
Then, simply relocate the RSA SSA PSS padding with the other RSA symbols
in lib/rsa instead of in boot/ and rename it to remove the mention to
FIT.
Finally, add the PSS padding wherever PKCS1.5 padding is specified as
one or the other can be used.
Link: https://lore.kernel.org/r/20251031-rsa-pss-always-v2-0-a29184ea064d@cherry.de
|
|
This renames FIT_RSASSA_PSS symbols to drop the FIT_ prefix to avoid
potential confusion since there's nothing FIT specific to those symbols.
It also isn't really related to booting, so boot/Kconfig is an odd place
for them to live. Since they make sense only in relation with RSA,
simply move them to lib/rsa where it makes more sense for them to
reside.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Let's not mix with symbols from other phases.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
It's defined a bit later in the same file, so let's remove the
duplicated entry.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This padding has nothing to do with FIT except that we can make use of
it when verifying the FIT signatures.
This padding can also be used to verify the signature "manually" e.g. by
calling rsa_verify_hash() directly with an embedded public key.
Additionally, this padding is only useful if RSA (and specifically
RSA_VERIFY) is enabled otherwise it's not used.
The only other place it's used is in rsa-sign.c which is only built for
the host tools and handled by TOOLS_FIT_RSASSA_PSS symbol instead, so no
need to care for that one.
Finally, the FIT_SIGNATURE dependency also wasn't enough because it only
implies RSA_VERIFY, meaning it can be disabled and still have
FIT_RSASSA_PSS enabled.
So add a dependency on RSA_VERIFY and reword the input prompt.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
SPL_FIT_FULL_CHECK currently shares its description and help text with
FIT_FULL_CHECK which is quite confusing, so let's specify this applies
to SPL.
Fixes: 6f3c2d8aa5e6 ("image: Add an option to do a full check of the FIT")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
Anshul Dalal <anshuld@ti.com> says:
Hi all,
We currently make use of CMD_BOOTI and CMD_BOOTZ in the SPL boot flow in
falcon mode, this isn't correct since all CMD_* configs are only meant
for U-Boot proper and not the SPL.
Therefore this patch set adds new LIB_BOOT[IMZ] configs that allow for
more granular selection of their respective compilation targets.
Additionally, this also allows us to more easily disable support for
raw images from secure falcon mode (SPL_OS_BOOT_SECURE) by doing the
following:
config LIB_SPL_BOOTI
...
depends on SPL_OS_BOOT && !SPL_OS_BOOT_SECURE
...
Link: https://lore.kernel.org/r/20251027-fix_cmd_bootx-v10-0-10487e907710@ti.com
|
|
Using CMD_* configs from spl doesn't make logical sense. Therefore
this patch replaces the checks for CMD_BOOTx with newly added library
symbols LIB_BOOT[IMZ] and SPL_LIB_BOOT[IMZ] which are enabled by their
respective CMD_* or SPL_* counterparts.
On platforms with non-secure falcon mode, SPL_BOOTZ is enabled by
default for 32-bit ARM systems and SPL_BOOTI is enabled by default for
64-bit ARM and RISCV.
The respective C files (image.c/zimage.c) are compiled based on library
symbols $(PHASE_)LIB_BOOTx instead which are in turn selected by both
CMD_BOOTx and SPL_BOOTx as required.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
to boot flows"
Kory Maincent (TI.com) <kory.maincent@bootlin.com> says:
This series converts the extension board framework to use UCLASS as
requested by Simon Glass, then adds extension support to pxe_utils
and bootmeth_efi (not tested) to enable extension boards devicetree load
in the standard boot process.
I can't test the imx8 extension scan enabled by the
imx8mm-cl-iot-gate_defconfig as I don't have this board.
I also can't test the efi bootmeth change as I don't have such board.
Link: https://lore.kernel.org/r/20251030-feature_sysboot_extension_board-v5-0-cfb77672fc68@bootlin.com
|
|
Remove the legacy extension board implementation now that all boards
have been converted to use the new UCLASS-based framework. This
eliminates lines of legacy code while preserving functionality
through the modern driver model approach.
Update the bootstd tests, due to the removal of extension hunter.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
|
|
Introduce UCLASS-based extension board support to enable more
standardized and automatic loading of extension board device tree
overlays in preparation for integration with bootstd and pxe_utils.
Several #if CONFIG_IS_ENABLED are used in cmd/extension_board.c to ease the
development but don't worry they are removed later in the series.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Relocate extension board support from cmd/ to boot/ directory in
preparation for converting the extension framework to use UCLASS.
Also improve code style by applying reverse xmas tree ordering.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
|
|
Fix typos in boot/Kconfig.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
|
|
Today, only a few platforms enable SPL_LOAD_FIT_FULL, and all enable
SPL_LOAD_FIT. As can be seen in usage, the FULL symbol is a superset of
the first symbol, not an alternative. Update Kconfig entries based on
this and simplify the only code which checks for either being set.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Only PowerPC and LS1021A platforms can make use of RAMBOOT_PBL. Add the
dependencies to the symbol.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
We have a large number of library symbols that should not be prompted
for by the user really but rather selected by the platform (or SoC) as
needed. To start with however, make these depend on !COMPILE_TEST.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The ARM64 kernel Image size with LOCKDEP enabled is now around 80 MiB, which
makes it unbootable due to "Image too large: increase CONFIG_SYS_BOOTM_LEN".
Increase the image size limit to 128 MiB to future proof the limit.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
At this time there are still major Linux distributions which by default
boot using LEGACY_IMAGE_FORMAT type scripts. Add this option to
DISTRO_DEFAULTS to ensure these platforms can still boot.
Fixes: d780965927d4 ("Drop the special am335x_boneblack_vboot target")
Reported-by: Sascha Silbe <sascha-pgp@silbe.org>
Tested-By: Sascha Silbe <sascha-pgp@silbe.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Since the bootmeth "rauc" is not a global boot method, do not select the
corresponding BOOTMETH_GLOBAL option.
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
|
|
This changes the default value to the most commonly used one among
existing defconfigs.
Signed-off-by: Martin Herren <sputnik@on-the-web.ch>
Acked-by: Michal Simek <michal.simek@amd.com> # xilinx_mbv
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
ft_board_setup_ex()"
João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> says:
In some use cases, board-specific device tree changes must not be overwritten
by system fixups. Although U-Boot provides ft_board_setup_ex() for this
purpose, it is currently only used on TI Keystone. This series makes
ft_board_setup_ex() a generic option, allowing its use by other architectures
and boards.
Additionally, considering that Toradex Verdin-AM62P hardware lifetime
guarantees are based on a 105°C junction temperature (while TI AM62Px supports
up to 125°C), this series implements necessary changes within TI K3 AM62P and
Toradex board code. These changes include exporting common fixup device Tree
functions used in TI K3 for board-code access and also fixup for AM62P thermal
zones to correctly reflect the number of CPU nodes according to the SoC part
number.
Link: https://lore.kernel.org/r/20250623-am62p-fdt-fixup-trip-points-v1-0-12355eb6a72f@toradex.com
|
|
In some use cases, board-specific device tree changes must not be
overwritten by system fixups. Although U-Boot provides
ft_board_setup_ex() for this purpose, it is currently only used on TI
Keystone. Make ft_board_setup_ex() to be a generic option, allowing its
use by other architectures/boards. To maintain backward compatibility,
enable it by default on TI Keystone.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
|
|
Some androidboot image have invalid kernel/ramdisk load addr,
force to ignore those value and use loadaddr instead.
There is a concern on exposing the whole memory to image loading is
dangerous. Also, since it's not always possible to change the load
addr by repacking the boot.img (mainly due to AVB signature mismatch),
we need a way to use kernel_addr_r and ramdisk_addr_r.
Suggested-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: George Chan <gchan9527@gmail.com>
Link: https://lore.kernel.org/r/20250518-android-boot-v3-1-02c8768e131f@gmail.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
Marek Vasut <marek.vasut+renesas@mailbox.org> says:
Rename the environment related variables and add ENV_ prefix, so that
all configuration options which are related to environment would have
an CONFIG_ENV_ prefix. No functional change.
Link: https://lore.kernel.org/r/20250609192701.20260-1-marek.vasut+renesas@mailbox.org
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Martin Schwan <m.schwan@phytec.de> says:
This series implements a new bootmeth for RAUC A/B systems. RAUC (Robust
Auto Update Controller) is a lightweight update client, providing "Safe
and Secure OTA Updates for Embedded Linux". See the following links for
more information about RAUC:
https://rauc.io/
https://rauc.readthedocs.io/en/latest/
PHYTEC uses RAUC in its Yocto based distribution "Ampliphy" as the
default way of updating embedded devices based on PHYTEC hardware. So
far, the logic selecting the correct partitions and files to boot was
being implemented in the U-Boot environment. While this is a
straightforward way to do it, adding and supporting new platforms became
somewhat tedious and is platform-specific. The introduction of U-Boot's
"Standard Boot" provided a convincing alternative, promising a simpler
and more portable way of booting, even for RAUC systems. This led me to
implement a new bootmeth supporting RAUC A/B systems. Note, that this
new bootmeth is not proprietary to PHYTEC products and is designed to
work on other hardware with a RAUC A/B system, too.
The bootmeth currently only supports symmetric A/B partitioning layouts.
E.g. A/rescue is not (yet) supported. The partition indexes and default
slot tries can be specified via configuration options.
For now, the bootmeth_rauc uses a similar approach for loading the
Kernel and device tree as the bootmeth_script, in that it requires a FIT
containing a U-Boot script loading the desired distro. It could be
possible to support booting without a script and load the Kernel and DT
directly with this bootmeth, but I found the script method to be very
flexible for now, in letting the distro decide what to load.
The bootmeth_rauc was tested on a phyBOARD-Pollux i.MX8M Plus [1] with
BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2 [2].
Supported boot devices are currently only MMC devices, but it should be
possible to add SPI flashes in the future.
To test this patch stack with PHYTEC's phyBOARD-Pollux i.MX8M Plus
board, you need to adjust the boot files to include the boot.scr.uimg
containing the distro's boot script and set "optargs" to "${raucargs}"
in it. Also disable any legacyboot in the U-Boot environment and simply
boot with Standard Boot:
bootmeth order rauc
bootflow scan -lb
[1]: https://www.phytec.eu/en/produkte/single-board-computer/phyboard-pollux/
[2]: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2/
Link: https://lore.kernel.org/r/20250604-wip-bootmeth-rauc-v3-0-f9fad913c57e@phytec.de
[trini: Don't enable by default]
|
|
Add a bootmeth driver which supports booting A/B system with RAUC as
their update client.
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
|
|
The bootstd code itself does not have any dependency on BLK in order to
build. However, in order to minimize size growth of non-migrated
platforms, change this from being "default y" to "default y if BLK".
This will make it easier to begin migration of platforms which do not
have any BLK-class device but do want to use bootstd.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
BOOTSTAGE_RECORD_COUNT=30 is too small to record booting a FIT image
with EFI kernel, initrd, dtb as seen on the StarFive VisionFive 2
board.
Increase the default for BOOTSTAGE_RECORD_COUNT to 50.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Introduce a new config option: RETRY_BOOTCMD. When enabled this causes
hush shell to re-run "bootcmd" when the auto-boot counter times out.
Tested-by: Danila Tikhonov <danila@jiaxyga.com> # google-sunfish
Tested-by: Jens Reidel <adrian@mainlining.org> # xiaomi-davinci
Link: https://lore.kernel.org/r/20250331-qcom-phones-v4-2-f52e57d3b8c6@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The option ONENAND_BOOT is never set, so remove it. The option
SYS_ONENAND_BOOT was never migrated to Kconfig and any platforms which
supported that have long been removed from the code, so remove the
reference there as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
So far only VBE-simple is implemented in U-Boot. This supports a single
image which can be updated in situ.
It is often necessary to support two images (A and B) so that the board
is not bricked if the update is interrupted or is bad.
In some cases, a non-updatable recovery image is desirable, so that the
board can be returned to a known-good state in the event of a serious
failure.
Introduce ABrec which provides these features. It supports three
independent images and the logic to select the desired one on boot.
While we are here, fix a debug message to indicate the function it
called. Provide a maintainers entry for VBE.
Note that fwupdated only supports VBE-simple so far, but supports for
ABrec will appear in time.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
VBE uses a crc8 checksum to verify that the nvdata is valid, so make
sure it is available if VBE is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
With VBE we want to use FIT in all phases of the boot. Add Kconfig
options to support this.
Disable the options for sandbox_vpl for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This reverts commit 1fdf53ace13f745fe8ad4d2d4e79eed98088d555, reversing
changes made to e5aef1bbf11412eebd4c242b46adff5301353c30.
I had missed that this caused too much size growth on rcar3_salvator-x.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Simon Glass <sjg@chromium.org> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on SPL tweaks and adjusting what
fatures are available in VPL.
Link: https://lore.kernel.org/r/20241207172412.1124558-1-sjg@chromium.org
|
|
VBE uses a crc8 checksum to verify that the nvdata is valid, so make
sure it is available if VBE is enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
