| Age | Commit message (Collapse) | Author |
|---|
|
ft_board_setup_ex()"
João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> says:
In some use cases, board-specific device tree changes must not be overwritten
by system fixups. Although U-Boot provides ft_board_setup_ex() for this
purpose, it is currently only used on TI Keystone. This series makes
ft_board_setup_ex() a generic option, allowing its use by other architectures
and boards.
Additionally, considering that Toradex Verdin-AM62P hardware lifetime
guarantees are based on a 105°C junction temperature (while TI AM62Px supports
up to 125°C), this series implements necessary changes within TI K3 AM62P and
Toradex board code. These changes include exporting common fixup device Tree
functions used in TI K3 for board-code access and also fixup for AM62P thermal
zones to correctly reflect the number of CPU nodes according to the SoC part
number.
Link: https://lore.kernel.org/r/20250623-am62p-fdt-fixup-trip-points-v1-0-12355eb6a72f@toradex.com
|
|
In some use cases, board-specific device tree changes must not be
overwritten by system fixups. Although U-Boot provides
ft_board_setup_ex() for this purpose, it is currently only used on TI
Keystone. Make ft_board_setup_ex() to be a generic option, allowing its
use by other architectures/boards. To maintain backward compatibility,
enable it by default on TI Keystone.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
|
|
There is no need to have two separate API's for freeing up memory. Use
a single API lmb_free() to achieve this.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
There currently are two API's for requesting memory from the LMB
module, lmb_alloc() and lmb_alloc_base(). The function which does the
actual allocation is the same. Use the earlier introduced API
lmb_alloc_mem() for both types of allocation requests.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
There currently are multiple allocation API's in the LMB module. There
are a couple of API's for allocating memory(lmb_alloc() and
lmb_alloc_base()), and then there are two for requesting a reservation
for a particular memory region (lmb_reserve() and
lmb_alloc_addr()). Introduce a single API lmb_alloc_mem() which will
cater to all types of allocation requests and replace lmb_reserve()
and lmb_alloc_addr() with the new API.
Moreover, the lmb_reserve() API is pretty similar to the
lmb_alloc_addr() API, with the one difference being that the
lmb_reserve() API allows for reserving any address passed to it --
the address need not be part of the LMB memory map. The
lmb_alloc_addr() does check that the address being requested is
actually part of the LMB memory map.
There is no need to support reserving memory regions which are outside
the LMB memory map. Remove the lmb_reserve() API functionality and use
the functionality provided by lmb_alloc_addr() instead. The
lmb_alloc_addr() will check if the requested address is part of the
LMB memory map and return an error if not.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The EFI HTTP boot puts the ISO installer image at some location in
memory. Information about this image has to be passed on to the OS
kernel, which is done by adding a persistent memory(pmem) node to the
devicetree(DT) that is passed to the OS. The OS kernel then gets
information about the presence of this ISO image and proceeds with the
installation.
In U-Boot, this ISO image gets mounted as a memory mapped blkmap
device slice, with the 'preserve' attribute. Add a helper function
which iterates through all such slices, and invokes a callback. The
callback adds the pmem node to the DT and removes the corresponding
memory region from the EFI memory map. Invoke this helper function as
part of the DT fixup which happens before booting the OS.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
lmb_alloc_base() is just calling lmb_alloc_base_flags() with LMB_NONE.
There's not much we gain from this abstraction, so let's remove the
former add the flags argument to lmb_alloc_base() and make the code
a bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
lmb_reserve() is just calling lmb_reserve_flags() with LMB_NONE.
There's not much we gain from this abstraction.
So let's remove the latter, add the flags argument to lmb_reserve()
and make the code a bit easier to follow.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
LMB flags is not an enum anymore. It's currently used as a bitmask
in various places of our code. So make it a u32 which is more
appropriate when dealing with masks.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The boot_fdt_add_mem_rsv_regions() function can be called twice, e.g.
first time during the board init (as a part of LMB init), and then when
booting the OS with 'booti' command:
lmb_add_region_flags
lmb_reserve_flags
boot_fdt_reserve_region
boot_fdt_add_mem_rsv_regions
^
|
+-----------------------+
| (1) | (2)
lmb_reserve_common image_setup_linux
lmb_init ...
initr_lmb do_booti
board_init_r 'booti'
That consequently leads to the attempt of reserving the same memory
areas (described in the 'reserved-memory' dts node) in LMB. The
lmb_add_region_flags() returns -EEXIST error code in such cases, but
boot_fdt_reserve_region() handles all negative error codes as a failure
to reserve fdt memory region, printing corresponding error messages,
which are essentially harmless, but misleading. For example, this is the
output of 'booti' command on E850-96 board:
=> booti $loadaddr - $fdtaddr
...
ERROR: reserving fdt memory region failed
(addr=bab00000 size=5500000 flags=2)
ERROR: reserving fdt memory region failed
(addr=f0000000 size=200000 flags=4)
...
Starting kernel ...
The mentioned false positive error messages are observed starting with
commit 1d9aa4a283da ("lmb: Fix the allocation of overlapping memory
areas with !LMB_NONE"), which removes the check for the already added
memory regions in lmb_add_region_flags(), making it return -1 for
!LMB_NONE cases. Another commit 827dee587b75 ("fdt: lmb: add reserved
regions as no-overwrite") changes flags used for reserving memory in
boot_fdt_add_mem_rsv_regions() from LMB_NONE to LMB_NOOVERWRITE. So
together with the patch mentioned earlier, it makes
lmb_add_region_flags() return -1 when called from
boot_fdt_reserve_region().
Since then, the different patch was implemented, returning -EEXIST error
code in described cases, which is:
lmb: Return -EEXIST in lmb_add_region_flags() if region already added
Handle -EEXIST error code as a normal (successful) case in
lmb_reserve_flags() and don't print any messages.
Fixes: 1d9aa4a283da ("lmb: Fix the allocation of overlapping memory areas with !LMB_NONE")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
|
|
The function description says this should return 0 or -1 on failures.
When regions coalesce though this returns the number of coalescedregions
which is confusing and requires special handling of the return code.
On top of that no one is using the number of coalesced regions.
So let's just return 0 on success and adjust our selftests accordingly
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The boot_fdt_add_mem_rsv_regions() function reserves the memreserve and
reserved-memory regions. These regions are being set with the LMB_NONE
flag which allows overwriting and re-using the regions. This was fine
earlier when the LMB memory map was local and not enforced
globally. But that is no longer the case. Mark these regions as
LMB_NOOVERWRITE so that they cannot be used.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reported-by: Vaishnav Achath <vaishnav.a@ti.com>
|
|
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
|
|
When calling android_image_get_dtb_by_index() using boot image v3+,
we should also pass the vendor_boot ramdisk address.
Use get_avendor_bootimg_addr() to do so.
Notes: on boot image v2, this is harmless since get_avendor_bootimg_addr()
returns -1.
for legacy implementations that don't have CMD_ABOOTIMG, add a weak
implementation to avoid linking errors.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from all "boot/" files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
In case of systems where DRAM bank ends at the edge of 32bit boundary,
start + size calculations would overflow. This happens on STM32MP15xx
with 1 DRAM bank starting at 0xc0000000 and 1 GiB of DRAM. This is a
usual 32bit system DRAM size overflow, fix it by doing all DRAM size
and offset calculations using u64 types. This also covers a case where
a 32bit PAE system might be able to address up to 36bits of DRAM.
Fixes: a4df06e41fa2 ("boot: fdt: Change type of env_get_bootm_low() to phys_addr_t")
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Move the variable below comment which explains what the variable means.
Update the comment. No functional change.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The lmb_alloc_base() returns phys_addr_t , map_sysmem() accepts
phys_addr_t as first parameter. Declare 'addr' as phys_addr_t and
get rid of the casts.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Change type of ulong env_get_bootm_low() to phys_addr_t env_get_bootm_low().
The PPC/LS systems already treat env_get_bootm_low() result as phys_addr_t,
while the function itself still returns ulong. This is potentially dangerous
on 64bit systems, where ulong might not be large enough to hold the content
of "bootm_low" environment variable. Fix it by using phys_addr_t, similar to
what env_get_bootm_size() does, which returns phys_size_t .
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
According to README CFG_SYS_BOOTMAPSZ section, in case both "bootm_low" and
"bootm_size" variables are defined, "bootm_mapsize" variable is not defined
and CFG_SYS_BOOTMAPSZ macro is not defined, all data for the Linux kernel
must be between "bootm_low" and "bootm_low" + "bootm_size".
Currently, for systems with DRAM between 0x4000_0000..0x7fff_ffff and with
e.g. bootm_low=0x60000000 and bootm_size=0x10000000, the code will attempt
to reserve memory from 0x4000_0000..0x4fff_ffff, which is incorrect. This
is because "bootm_low" is not taken into consideration correctly.
The last parameter of lmb_alloc_base() is the maximum physical address of
the to be reserved LMB area. Currently this is the start of DRAM bank that
is considered for LMB area reservation + min(DRAM bank size, bootm_size).
In case bootm_low is set to non-zero, this maximum physical address has to
be shifted upward, to min(DRAM bank start + size, bootm_low + bootm_size),
otherwise the reserved memory may be below bootm_low address.
In case of multiple DRAM banks, the current change reserves top part of
the first bank, and reserves the rest of memory in the follow up banks.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The "fdt" command is convenient for making small changes to the OS FDT,
especially during development. This is easy when the kernel and FDT are
loaded separately, but can be cumbersome for FIT images, requiring to
unpack the image, manually apply overlays, etc.
Add an option to execute a command "fdt_fixup" from the environment at
the beginning of image_setup_libfdt() (after overlays are applied, and
before the other fixups).
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Move this check before the FDT fixups so that we can use a livetree
after this point.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Just use map_to_sysmem() instead of all the casting.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This may as well happen before the general event is emitted, so move it.
This will allow us to use the livetree for the event part, but the
flattree for the earlier part.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This code dates from around 2008:
56844a22b76 powerpc: Fix bootm to boot up again with a Ramdisk
Since then we have added FDT relocation which provides enough space
for expansion. We have also added all sorts of fixups earlier in
image_setup_libfdt() which require more space, with ramdisk being the
least of them.
Therefore this extra hack for ramdisk seems unnecessary. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
The of_size parameter is not used, so remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
This function only uses one argument from bootm (argv[2]) so pass it in
directly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Rather than having boot_get_fdt() calculate this, move the calculation
into the caller. This removes the access to argv[0] in this function,
so we can later refactor it to just accept argv[2] instead of the whole
argv[].
Move the function comment to the header file and fix the u8 argument,
while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Enable the support for boot image header version 3 and 4
using abootimg command.
In order to use version 3 or 4:
1- Vendor boot image address should be given to abootimg cmd.
abootimg addr $1 $vendor_boot_load_addr
2- "ramdisk_addr_r" env variable (ramdisk address) should be set to host
the ramdisk : generic ramdisk + vendor ramdisk
Replace "struct andr_boot_img_hdr_v0*" by "void *" in
some functions since v3 and v4 are now supported as well.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Introduce vendor boot image for version 3 and 4 of boot image header.
The vendor boot image will hold extra information about kernel, dtb
and ramdisk.
This is done to prepare for boot image version 3 and 4 support.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Android introduced boot header version 3 or 4.
The header structure change with version 3 and 4 to support
the new updates such as:
- Introducing Vendor boot image: with a vendor ramdisk
- Bootconfig feature (v4)
Change andr_img_hdr struct name to maintain support for version v0,
v1 and v2 while introducing version 3 and 4.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_CMD_PSTORE defined in Kconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This converts 2 usages of this option to the non-SPL form, since there is
no SPL_CMD_FDT defined in Kconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Now that we support multiple device trees with the ofnode interface, we
can pass the correct FDT to this event. This allows the 'working' FDT to
be fixed up, as expected, so long as OFNODE_MULTI_TREE is enabled.
Also make sure we don't try to do this with livetree, which does not
support fixups yet.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This code uses casts between addresses and pointers, so does not work with
sandbox. Update it so we can allow sandbox to do device tree fixups.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Pass the boot images along as well, in case the fixups need to look at
them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not needed and we should avoid typedefs. Use the struct instead
and rename it to indicate that it really is a legacy struct.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not needed and we should avoid typedefs. Use the struct instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This converts the following to Kconfig:
CONFIG_SYS_FDT_PAD
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
At present there is a confusing array of functions that handle the
device tree fix-ups needed for booting an OS. We should be able to switch
to using events to clean this up.
As a first step, create a new event type and call it from the standard
place.
Note that this event uses the ofnode interface only, since this can
support live tree which is more efficient when making lots of updates.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The current implementation of boot_relocate_fdt() places DT at the
highest usable DRAM address, which is calculated as:
env_get_bootm_low() + env_get_bootm_mapsize()
which by default becomes gd->ram_base + gd->ram_size.
Systems like i.MX53 can have multiple DRAM banks with gap between them,
e.g. have DRAM at 0x70000000-0x8fffffff and 0xb0000000-0xcfffffff , so
for them the calculated highest DRAM address is 0xafffffff, which is
exactly in the gap and thus not usable.
Fix this by iterating over all DRAM banks and tracking the remaining
amount of the total mapping size obtained from env_get_bootm_mapsize().
Limit the maximum LMB area size to each bank, to avoid using nonexistent
DRAM.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
|
|
It can be useful for the OS (Linux) to know which configuration has
been chosen by U-Boot when launching a FIT image.
Store the name of the FIT configuration node used in a new string
property called 'u-boot,bootconf' in the '/chosen' node in device tree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Sphinx expects Return: and not @return to indicate a return value.
find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Quite a lot of the code in common/relates to booting and images. Before
adding more it seems like a good time to move the code into its own
directory.
Most files with 'boot' or 'image' in them are moved, except:
- autoboot.c which relates to U-Boot automatically running a script
- bootstage.c which relates to U-Boot timing
Drop the removal of boot* files from the output directory, since this
interfers with the symlinks created by tools and there does not appear
to be any such file from my brief testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Artem Lapkin <email2tema@gmail.com>
Tested-by: Artem Lapkin <email2tema@gmail.com>
|
