summaryrefslogtreecommitdiff
path: root/configs/phycore_am62x_a53_defconfig
AgeCommit message (Collapse)Author
2026-03-30configs: phycore_am62x_a53_defconfig: Enable CMD_USB_MASS_STORAGEWadim Egorov
This allows us to expose MMC devices to the host for easy flashing via USB. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2026-01-21configs: phycore_am6xx_a53_defconfig: Enable CMD_DDR4Wadim Egorov
Enable command for verifying DDRSS inline ECC features. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2025-12-31spl: Kconfig: k3: Set common default for SPL_LOAD_FIT(_ADDRESS)Andrew Davis
These are common for all K3 based boards. Add the common values as defaults and remove from each board defconfig Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Bryan Brattlof <bb@ti.com>
2025-10-27configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2025-08-11Merge patch series "arch: arm: dts: k3-am625-phyboard-lyra: Disable unused ↵Tom Rini
watchdogs in U-Boot" This series from Wadim Egorov <w.egorov@phytec.de> cleans up how watchdogs are handled on some phytec TI K3 platforms. Link: https://lore.kernel.org/r/20250730154217.1116751-1-w.egorov@phytec.de
2025-08-11board: phytec: phycore-am62x: Add watchdog start to bootcmdWadim Egorov
Allows run-time control over watchdog auto-start and the timeout via setting the environment variable watchdog_timeout_ms. A value of zero means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value. Users can enable the watchdog to monitor the boot process until userspace or OS takes over to serve the watchdog. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2025-07-28configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2025-07-24treewide: Remove empty board_init() function from all boardsSam Protsenko
Commit 86acdce2ba88 ("common: add config for board_init() call") introduced CONFIG_BOARD_INIT option. This option can be disabled for the boards where board_init() function is not needed. Remove empty board_init() calls for all boards where it's possible, and disable CONFIG_BOARD_INIT in all related defconfigs. This cleanup was made semi-automatically using these scripts: [1]. No functional change, but the binary size for the modified boards is reduced a bit. [1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon Tested-by: Bryan Brattlof <bb@ti.com> Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
2025-07-14configs: am62x: fix CONFIG_NR_DRAM_BANKS to 1Anshul Dalal
CONFIG_NR_DRAM_BANKS defines the number of DRAM banks on the device. The default value of NR_DRAM_BANKS for ARCH_K3 is set to 2 (arch/arm/mach-k3/Kconfig:199) but should be 1 for am62x platforms. This patch updates NR_DRAM_BANKS value for all am62x platforms to 1. Fixes: 2969ed31b893 ("configs: Add am62x_beagleplay_*_defconfig") Fixes: 2d257d9279e3 ("configs: Add configs for AM62x SK") Fixes: 085cd6459dae ("board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM") Fixes: 7d1a10659f5b ("board: toradex: add verdin am62 support") Signed-off-by: Anshul Dalal <anshuld@ti.com>
2025-06-26Merge patch series "malloc size cleanup for K3 devices"Tom Rini
Udit Kumar <u-kumar1@ti.com> says: Many boards based upon K3 ARCH overrides default malloc size to 32MB, as part of cleanup, add default size of 32MB for K3 ARCH. Link: https://lore.kernel.org/r/20250614093717.2479920-1-u-kumar1@ti.com
2025-06-26configs: j7*/*am62*: Remove malloc size overwrite at config level.Udit Kumar
Use default value of malloc size coming from Kconfig, instead of board specific override. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2025-06-20env: Rename SYS_MMC_ENV_DEV to ENV_MMC_DEVICE_INDEXMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device index, a number, as enumerated by U-Boot. Update the help text accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-06-20env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANTMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-05-22configs: phycore_am6xx_a53_defconfig: Enable BOOTDEV_SPI_FLASHWadim Egorov
Enable standard boot with SPI Flash & sync after savedefconfig. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2025-05-22configs: phycore_am6xx: Default BOOTCOMMAND to standard bootWadim Egorov
Make the "bootflow scan -lb" command execute first and fallback to the legacy BSP boot scripts. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2025-05-12configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2025-05-05configs: phycore_am62x_a53_defconfig: Remove CONFIG_SYS_BOOTM_LENDaniel Schultz
This config was defined with the default value of 8 MiB. However, the default value is different when CONFIG_ARM64 is enabled and should be 64 MiB. Remove this config from the A53 defconfig and use the correct default config. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
2025-04-24configs: set SPL_TEXT_BASE by default for k3 platformsAnshul Dalal
SPL_TEXT_BASE is used as the load address for the main domain SPL on k3 platforms. Since the config value is the same for every board, this patch sets the value 0x80080000 as default for all 64-bit ARCH_K3, 0x43c00000 as default for the R5 cores and deletes the instances of SPL_TEXT_BASE in individual defconfigs. Signed-off-by: Anshul Dalal <anshuld@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2025-04-11configs: phycore_am62x_a53_defconfig: Enable gpioDaniel Schultz
The AM62x uses the DA8XX (DaVinci) GPIO controller. Enable CONFIG_DA8XX_GPIO to support GPIO access from the Cortex-A53. Also enable the 'gpio' command to allow users to interact with GPIOs from the U-Boot shell. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-04-11configs: phycore_am62x_a53_defconfig: Enable remoteproc cmdDaniel Schultz
This enables the 'rproc' command, allowing users to start, stop, and manage co-processors as well as load firmware images. Useful for systems with auxiliary cores, such as the M4 core in the AM62x soc. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-04-10Merge patch series "*** Add Ethernet boot support for AM62Ax + phyCORE-AM62 ↵Tom Rini
SoMs ***" Wadim Egorov <w.egorov@phytec.de> says: Add general ethernet boot support for AM62Ax SoC. Some of the work is based on TI's downstream u-boot patches found in [1], patches touching code in mach-k3 and *.yaml board config files. Also, provide defconfigs and device tree changes for phyCORE-AM62x and phyCORE-AM62Ax to support booting via ethernet. [1] https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1307981/sk-am62a-lp-rgmii-boot-mode-problem Link: https://lore.kernel.org/r/20250325035824.2304200-1-w.egorov@phytec.de
2025-04-10configs: phycore_am62x_a53_defconfig: Update for ethernet bootWadim Egorov
Add support for ethernet boot in the A53 SPL. Increase the SPL Size limit and update SPL_STACK_R_ADDR. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2025-02-20configs: phycore_am62x_a53_defconfig: Enable ENV_IS_IN_SPI_FLASHDaniel Schultz
Enable ENV_IS_IN_SPI_FLASH to read the environment from the SPI flash when booting from it. The oftree, kernel and ramdisk sizes are located in this environment and therefore required to boot an initramfs. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
2025-01-24configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-12-13configs: phycore_am6*_a53_defconfig: Enable capsule updateWadim Egorov
Enable raw & on disk capsule updates and provide configs required for updating MTD devices. Also resync after savedefconfig. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-11-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-11-14Merge patch series "Apply SoM overlays on phyCORE-AM6xx SoMs"Tom Rini
Wadim Egorov <w.egorov@phytec.de> says: Our SoMs are available in multiple configurations, managed via device tree overlays. To determine the specific variant in use, we read the EEPROM and apply the appropriate overlays during boot to the device tree used by the OS. Apply overlays for phyCORE-AM62x and phyCORE-AM64x SoMs. Future K3 SoMs will be able to reuse this logic and overlays. Link: https://lore.kernel.org/r/20241030164815.1763506-1-w.egorov@phytec.de
2024-11-14configs: phycore_am62x_a53_defconfig: Add SoM overlays to OF_OVERLAY_LISTWadim Egorov
Include SoM dt-overlays for DT control so we can include them into our u-boot FIT image. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-11-12configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-09-10Merge patch series "phycore-am62/4: Add more boot sources"Tom Rini
Daniel Schultz <d.schultz@phytec.de> says: This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot sources: - Load U-Boot with USB DFU - Load a Linux and initramfs from OSPI/QSPI NOR flash - Load a Linux and rootfs from Network Moreover, it adds required changes to the environment to boot an A/B system with RAUC and includes some minor fixes.
2024-09-10configs: phycore_am62x_*_defconfig: Set PHYTEC as ManufacturerDaniel Schultz
Commit 371b379edbf3 ("configs: Make USB_GADGET_MANUFACTURER consistent over all PHYTEC boards") made the USB_GADGET_MANUFACTURER value consistent over all PHYTEC boards. Update the phyCORE-AM62x defconfigs to make this config consistent as well. Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
2024-09-10configs: phycore_am62x_a53_defconfig: Fix CONFIG_ENV_SIZEDaniel Schultz
The environment should have a size of 0x20000 instead 0x2000. Update to have the same environment size for all PHYTEC K3 products. Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
2024-09-10configs: phycore_am62x_a53_defconfig: Merge am62x_a53_usbdfu.configDaniel Schultz
Merge the am62x_a53_usbdfu.config into the phyCORE-AM62x A53 defconfig to properly support USB DFU boot. This config was made with the following command: make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- \ phycore_am62x_a53_defconfig am62x_a53_usbdfu.config However, CONFIG_USB_GADGET_MANUFACTURER was not merged to keep Phytec as manufacturer. Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
2024-09-10configs: phycore_am62x_a53_defconfig: Make BOOTCMD genericDaniel Schultz
The phyCORE-AM62x board code sets an environment variable 'boot' with the device U-Boot booted from. Use this variable in CONFIG_BOOTCOMMAND to boot Linux from the same boot device by default. Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
2024-08-23spl: mmc: Try to clean up raw-mode optionsSimon Glass
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more direct way. This makes it easier to understand the options with 'make menuconfig'. There are three different ways of specifying the offset: - sector offset - partition number - partition type So make these a choice, so it is more obvious what is going on. Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed. Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2024-07-16configs: phycore_am62x_a53: Add more commandsDaniel Schultz
Add i2c and rtc commands with all dependencies which are required for testing. Additionally, add smc and cache commands to boot Zephyr on the A53. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
2024-06-18configs: phycore_am6xx: Update MTD & SPI configsWadim Egorov
Enable mtd command and remove SPI NOR flashes we do not populate on our SoMs. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
2024-06-18configs: phycore_am62x_a53_defconfig: Enable DFU bootWadim Egorov
Enable configs required for booting via DFU. Configs taken from the am62x_a53_usbdfu.config config fragment. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
2024-06-18configs: phycore_am62x: Update environment locationWadim Egorov
Update environment location to align with OSPI fixed-partition definitions and provide a redundant environment at a 2nd location. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
2024-06-18board: phytec: phycore-am62x: Fix CONFIG_SPL_BOARD_INITWadim Egorov
Make sure spl_board_init() gets compiled by enabling missing CONFIG_SPL_BOARD_INIT and including hardware.h. Fixes: 085cd6459dae ("board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM") Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
2024-06-18board: phytec: common: k3: Copy fixed partitions to OS device treeWadim Egorov
Copy fixed-partitions nodes from U-Boot device tree to OS device tree. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
2024-06-07Merge patch series "*** phyCORE-AM62x: DDR detection / Inject DDR timing ↵Tom Rini
deltas ***" Wadim Egorov <w.egorov@phytec.de> says: Changes in v2: - Reabse to current next - Add Tested-by: John Ma <jma@phytec.com> - Add Kconfig option to select RAM size statically - Make board/phytec/common/k3 always compile for CONFIG_ARCH_K3 v1: https://lists.denx.de/pipermail/u-boot/2024-May/553057.html
2024-06-07board: phytec: am62x: Add support for 1 & 4 GB RAM variantsWadim Egorov
Use content of EEPROM to detect the actual RAM size and adjust DDR timings, size and banks accordingly. Also enable the SoM detection per default in the defconfigs. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Tested-by: John Ma <jma@phytec.com>
2024-06-07configs: phycore_am62x_a53_defconfig: Enable CONFIG_ENV_OVERWRITEDaniel Schultz
Enable CONFIG_ENV_OVERWRITE to overwrite ethaddr in the environment. This is required because our environment is not located in the boot partition. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Tested-by: Wadim Egorov <w.egorov@phytec.de>
2024-04-29Merge patch series "*** Migrate some PHYTEC boards to OF_UPSTREAM ***"Tom Rini
Wadim Egorov <w.egorov@phytec.de> says: Migrate the boards I maintain to OF_UPSTREAM.
2024-04-29phycore-am62x: Migrate to OF_UPSTREAMWadim Egorov
The phycore-am62x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-04-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-11board: phycore-am62x: Extend for better environment handlingWadim Egorov
Select environment location based on the device we boot from. Also, introduce a "boot" variable that represents the current boot device and can be used by scripts. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-03-11Merge tag 'v2024.04-rc4' into nextTom Rini
Prepare v2024.04-rc4
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-21 09:11:40 +0000