summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-09xilinx: zynqmp: Add missing prototype for zynqmp_mmio_writeAlgapally Santosh Sagar
Add missing prototype to fix the sparse warning, warning: no previous prototype for 'zynqmp_mmio_write' [-Wmissing-prototypes]. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230301103334.1455-2-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-09mtd: nand: arasan: Set ofnode valueAshok Reddy Soma
Ofnode value is not set, so all the DT properties are not being read and due to this default values are being used. Find nand node and set chip->flash_node value. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-09mtd: nand: arasan: Remove hardcoded bbt optionAshok Reddy Soma
Bad block table option is hardcoded to read from flash with NAND_BBT_USE_FLASH option. This decision should be done based on DT property. Remove this hardcoding, to be able to use DT property. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-09spi: xilinx_spi: Fix spi resetJiajie Chen
It was incorrectly using an old priv->regs pointer, which was initialized to zero. SPI resets won't happen on first call. Signed-off-by: Jiajie Chen <c@jia.je> Link: https://lore.kernel.org/r/20230227150938.211820-1-c@jia.je Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-09fpga: zynqmppl: fix fpga loads command for unencrypted use caseNeal Frager
When using the fpga loads command, the driver is passing the AES encryption key address is all cases. However, for the authenticated, but not encrypted use case, there is no AES encryption key, and this value is 0. When AES encryption is not used on the fpga bitstream, the pmufw assumes that the AES key address is a bitstream size value like what is used by the unsecure fpga load command. To fix the problem, this patch checks to see if the AES key address is zero. If the AES key address is zero, it means that AES is not being used on the bitstream and the bitstream size should be passed instead. Thus, matching the fpga load functionality. Signed-off-by: Neal Frager <neal.frager@amd.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230214131959.40298-1-neal.frager@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-09arm64: zynqmp: Add missing ZYNQMP_FIRMWARE dependenciesAlgapally Santosh Sagar
There are missing Kconfig dependencies in the code which is using firmware interface. The commit 71efd45a5fc7 ("arm64: zynqmp: Change firmware dependency") add option to also disable ZYNQMP_FIRMWARE. But not all Kconfig dependencies were properly described and also sdhci and gem drivers didn't protect the code properly. So, add the missing ZYNQMP_FIRMWARE dependencies. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230201095553.11219-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-07Merge tag 'next-20230307' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video into next - video console refactoring and optimization - support for fonts wider than 1 byte - use named header for 8x16 font data - support multiple fonts configuration - move get_font_size() to truetype driver ops - support font size configuration at runtime - add 16x32 Terminus font from linux - add 12x22 Sun font from linux - add 12x22 console simple font test
2023-03-07video console: add 16x32 Terminus font from linuxDzmitry Sankouski
Modern mobile phones typically have high pixel density. Bootmenu is hardly readable on those with 8x16 font. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-07video console: add 12x22 Sun font from linuxDzmitry Sankouski
Modern mobile phones typically have high pixel density. Bootmenu is hardly readable on those with 8x16 font. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-07video console: allow font size configuration at runtimeDzmitry Sankouski
Allow font size configuration at runtime for console_simple.c driver. This needed for unit testing different fonts. Configuring is done by `font` command, also used for font selection in true type console. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-07video console: move vidconsole_get_font_size() logic to driver opsDzmitry Sankouski
Since multiple vidconsole drivers exists, vidconsole_get_font_size() implementation cannot longer live in vidconsole_uclass.c file. Move current vidconsole_get_font_size logic to truetype driver ops. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-07video console: implement multiple fonts configurationDzmitry Sankouski
This needed for unit testing different fonts. Configured fonts are placed in an array of fonts. First font is selected by default upon console probe. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [agust: fixed build error when bmp logo disabled] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2023-03-07video console: add support for fonts wider than 1 byteDzmitry Sankouski
Devices with high ppi may benefit from wider fonts. Current width implementation is limited by 1 byte, i.e. 8 bits. New version iterates VIDEO_FONT_BYTE_WIDTH times, to process all width bytes, thus allowing fonts wider than 1 byte. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-07video console: refactoring and optimizationDzmitry Sankouski
- move common code to vidconsole_internal.h and console_core.c - unite probe functions - get rid of code duplications in switch across bpp values - extract common pixel fill logic in two functions one per horizontal and vertical filling - rearrange statements in put_xy* methods in unified way - replace types - uint*_t to u* Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-06mmc: remove SDHCI SPEARPatrick Delaunay
As the file spear_sdhci.c file is already removed, delete the associated configuration CONFIG_MMC_SDHCI_SPEAR. Fixes: c942fc925e7dab ("mmc: spear: remove the entire spear_sdhci.c file") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-03-06clk: ast2600: Keep PLL power onDylan Hung
According to the PLL vendor, we should keep the PLL power on, so we shouldn't toggle the power-down bit during PLL initialization. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au>
2023-03-06ram: ast2600: Keep MPLL power onDylan Hung
According to the PLL vendor, we should keep the PLL power on, so we shouldn't toggle the power-down bit during PLL initialization. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au>
2023-03-06timer: fttmr010: return a previously deleted driver now ported to DMSergei Antonov
The fttmr010 timer driver was deleted by commit 29fc6f24926e ("ARM: remove a320evb board support") The original source file was: arch/arm/cpu/arm920t/a320/timer.c Return the driver to the codebase in a DM compatible form. A platform using fttmr010 will be submitted later. This hardware is described in the datasheet [1], starting from page 348. According to the datasheet, there is a Revision Register at offset 0x3C, which is not present in 'struct fttmr010'. Add it and debug() print revision in probe function. [1] https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf Signed-off-by: Sergei Antonov <saproj@gmail.com>
2023-03-03Merge branch '2023-03-02-kconfig-and-CONFIG-cleanups' into nextTom Rini
- Partial merge of a series of mine to select some framework options that shouldn't be prompted for (and remove some unused code related to that), and a partial merge of a series from Simon to remove some dead code and address various CONFIG_IS_ENABLED/IS_ENABLED issues in code.
2023-03-03dm: Add a TPL symbol for simple-busSimon Glass
This is used in some x86 code, so add a symbol for it. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-03net: Add an SPL config for atherosSimon Glass
Add a new SPL_PHY_ATHEROS to avoid a build error on am335x_evm with split config. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-03-02sandbox: Tidy up I2C optionsSimon Glass
At present we enable the sandbox I2C driver for all builds. Add a separate Kconfig option to control this, so that it can be disabled in TPL, where it is not needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2023-03-02sandbox: Tidy up RTC optionsSimon Glass
At present we enable the sandbox RTC driver for all builds. Add a separate Kconfig option to control this, so that it can be disabled in TPL, where it is not needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-02Correct SPL uses of PHY_FIXEDSimon Glass
This converts 3 usages of this option to the non-SPL form, since there is no SPL_PHY_FIXED defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-02Correct SPL uses of MULTIPLEXERSimon Glass
This converts 3 usages of this option to the non-SPL form, since there is no SPL_MULTIPLEXER defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-03-02Correct SPL uses of DISPLAY_AER_FULLSimon Glass
This converts 2 usages of this option to the non-SPL form, since there is no SPL_DISPLAY_AER_FULL defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-02sh4: Drop unused twl6030 driverSimon Glass
This is not used. Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-02mtd: Drop unused kb9202_nand driverSimon Glass
This is not used since time out of mind. Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-03-02usb: xhci-mtk: modify the SOF/ITP interval for mt8195Chunfeng Yun
There are 4 USB controllers on MT8195, the controllers (IP1~IP3, exclude IP0) have a wrong default SOF/ITP interval which is calculated from the frame counter clock 24Mhz by default, but in fact, the frame counter clock is 48Mhz, so we shall set the accurate interval according to 48Mhz for those controllers. Note: The first controller no need set it, but if set it, shall change tphy's pll at the same time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-03-02phy: phy-mtk-tphy: add support mt8195Chunfeng Yun
The T-PHY controller is designed to use use PLL integer mode, but in fact use fractional mode for some ones on mt8195 by mistake, this causes signal degradation (e.g. eye diagram test fail), fix it by switching PLL to 26Mhz from default 48Mhz to improve signal quality. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2023-03-02phy: phy-mtk-tphy: remove macros to prepare bitfield valueChunfeng Yun
Prefer to make use of FIELD_PREP() macro to prepare bitfield value, then no need local macros anymore. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2023-03-02usb: dwc3-meson-g12a: Select PHY instead of imply PHYMarek Vasut
Imply means you can turn off the option and expect things to work - "it's a good idea to have X enabled" is when to use imply - "you must have X for Y to work" is when to use select Use "select" here. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-03-01arm: mvebu: Add support for generating NAND kwbimagePali Rohár
Add a new Kconfig option CONFIG_MVEBU_SPL_BOOT_DEVICE_NAND which instruct make to generate kwbimage with NAND header. This image is used for booting from NAND flash (either SPI or parallel). Support is very simple, SPL after finishes DDR training returns back to the BootROM (via CONFIG_SPL_BOOTROM_SUPPORT option) and BootROM then loads and executes U-Boot proper. To generate correct kwbimage NAND header, it is required to set following Kconfig options: CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_MVEBU_SPL_NAND_BADBLK_LOCATION They are used only by make / mkimage when generating final kwbimage. CONFIG_MVEBU_SPL_NAND_BADBLK_LOCATION is a new mvebu specific Kconfig option which is set into kwbimage NAND_BADBLK_LOCATION header field. Signed-off-by: Pali Rohár <pali@kernel.org>
2023-02-28Merge tag 'tpm-next-28022023' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-tpm into next TPM auto startup and testing: Due to U-Boot's lazy binding we always relied on command line tools to initialize the TPM subsystem and devices. One exception is the EFI subsystem. When compiled with TCG2 measured boot support the TPM was automatically initialized. However that init was not complete. The TCG specs [0] (and specifically §12.3 Self-test modes) describe how self-tests on the device should be performed. This PR is adding an extra API function, that can be used to initialize the TPM2.0 properly. Simon added the equivalent for TPM1.2 and refactored the DM tests to include the new funtion. [0] https://trustedcomputinggroup.org/wp-content/uploads/TPM-Rev-2.0-Part-1-Architecture-01.07-2014-03-13.pdf
2023-02-28Merge tag 'u-boot-nand-20230227' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next Pull request for u-boot-nand-20230227 - mark reserved blocks from Ashok Reddy Soma - backport BRCMNAND changes from Linux from Linus Walleij - fix display of unknown raw ID from Patrice Chotard - show reserved block in chip.erase from Michael Trimarchi
2023-02-28tpm: sandbox: Change the return code when device is already openIlias Apalodimas
All the TPM drivers as well as out TCG TIS API for a TPM2.0 device return -EBUSY if the device has already been opened. Adjust the sandbox TPM do return the same error code. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-02-27Merge tag 'v2023.04-rc3' into nextTom Rini
Prepare v2023.04-rc3
2023-02-27mtd: nand: Show reserved block in chip.eraseMichael Trimarchi
The "nand chip.erase" command always printed as bad blocks even in the case of reserved blocks. Reserved blocks are used for storing bad block tables. The patch displays "bbt reserved" when printing reserved blocks in "nand chip.erase" command. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: spinand: Fix display of unknown raw IDPatrice Chotard
In case ID is not found in manufacturer table, the raw ID is printed using %*phN format which is not supported by lib/vsprintf.c. The information displayed doesn't reflect the raw ID return by the unknown spi-nand. Use %02x format instead, as done in spi-nor-core.c. For example, before this patch: ERROR: spi-nand: spi_nand flash@0: unknown raw ID f74ec040 after ERROR: spi-nand: spi_nand flash@0: unknown raw ID 00 c2 26 03 Fixes: 0a6d6bae0386 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECCÁlvaro Fernández Rojas
Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall always be done without ECC enabled. This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2 clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed from ff ff ff to 00 00 00, reporting incorrect ECC errors. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: support v2.1-v2.2 controllersÁlvaro Fernández Rojas
v2.1: tested on Netgear DGND3700v1 (BCM6368) v2.2: tested on Netgear DGND3700v2 (BCM6362) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-6-noltari@gmail.com [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: rename page sizesÁlvaro Fernández Rojas
Current pages sizes apply to controllers after v3.4 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-4-noltari@gmail.com [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: fix CS0 layoutÁlvaro Fernández Rojas
Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: rename v4 registersÁlvaro Fernández Rojas
These registers are also used on v3.3. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-2-noltari@gmail.com [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: correctly verify erased pagesÁlvaro Fernández Rojas
The current code checks that the whole OOB area is erased. This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will fail due to the usable OOB bytes not being 0xff. Correct this by only checking that data and ECC bytes aren't 0xff. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512082451.771212-1-noltari@gmail.com [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: nand: brcmnand: Add support for flash-dma v0Kamal Dasu
This change adds support for flash dma v0.0. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfipsClaire Lin
In brcmstb_nand_verify_erased_page(), the ECC chunk pointer calculation while correcting erased page bitflips is wrong, fix it. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Claire Lin <claire.lin@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: Add support for v7.3 controllerKamal Dasu
This change adds support for brcm NAND v7.3 controller. This controller uses a newer version of flash_dma engine and change mostly implements these differences. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: rawnand: brcmnand: Refactored code to introduce helper functionsKamal Dasu
Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [Ported to U-Boot from the Linux kernel] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-02-27mtd: nand: Mark reserved blocksAshok Reddy Soma
Reserved blocks are used for storing bad block tables. With "nand bad" command, these reserved blocks are shown as bad blocks. This is leading to confusion when compared with Linux bad blocks. Hence, display "bbt reserved" when printing reserved blocks with "nand bad" command. To acheive this, return 2 which represents reserved from nand_isbad_bbt() instead of 1 in case of reserved blocks and catch it in cmd/nand.c. "nand bad" command display's hexadecimal numbers, so add "0x" prefix. Example log will show up as below. ZynqMP> nand bad Device 0 bad blocks: 0x00400000 0x16800000 0x16c00000 0x17000000 0x3d800000 0x3e400000 0xe8400000 0xff000000 (bbt reserved) 0xff400000 (bbt reserved) 0xff800000 (bbt reserved) 0xffc00000 (bbt reserved) 0x116800000 0x116c00000 0x1ff000000 (bbt reserved) 0x1ff400000 (bbt reserved) 0x1ff800000 (bbt reserved) 0x1ffc00000 (bbt reserved) Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-By: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 09:49:45 +0000