summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-05-15net: ti: am65-cpsw-nuss: avoid errors due to imbalanced start()/stop()Matthias Schiffer
The eth-uclass state machine doesn't prevent imbalanced start()/stop() calls - to the contrary, it even provides eth_init_state_only() and eth_halt_state_only() functions that change the state without any calls into the driver. This means that the driver must be robust against duplicate start() and stop() calls as well as send/recv calls while the interface is down. We decide not to print error messages but just to return an error in the latter case, as trying to send packets on a disabled interface commonly happens when the netconsole is still active after the Ethernet has been halted during bootm. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2024-05-15Merge patch series "Add remoteproc driver for AM62a SoC"Tom Rini
Hari Nagalla <hnagalla@ti.com> says: This series adds relevant ip data in remoteproc driver for AM62a devices. Logs: https://paste.sr.ht/~hnagalla/5e20838705c1d688bca81886dad56451b56d3913
2024-05-15remoteproc: k3-r5: Add support for R5F core on AM62A SoCsHari Nagalla
AM62A has a R5F core in MCU voltage domain. Extend support for R5F remote proc driver on AM62A with compatible strings. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2024-05-15remoteproc: k3-dsp: Enable C71x support for AM62AHari Nagalla
AM62A SoC has a single C71x DSP subsystem with analytics engine in main voltage domain. Extend support to AM62A with compatible strings. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2024-05-15Merge patch series "Add DFU and usb boot for TI am62x SK and beagleplay"Tom Rini
Martyn Welch <martyn.welch@collabora.com> says: This series adds DFU support for TI AM62 SK and beagleplay boards. I have picked this series up from Sjoerd due to time constraints. Since the last revision: * Removed dwc3 mode setting in favour of reinstating forced peripheral mode for usb0 * Use of config fragments for both r5 and a53 DFU configuration to reduce duplication * Typographical improvements to documentation We plan to also submit the dts changes to linux so that those can be dropped again in the near future (hopefully)
2024-05-15usb: dwc3: Add dwc3 glue driver for am62Sjoerd Simons
Add glue code for TI AM62 to the dwc3 driver; Most code adopted from TI vendor u-boot code. Signed-off-by: Sjoerd Simons <sjoerd@collabora.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on beagle play
2024-05-13crypto: nuvoton: npcm_sha: Support SHA 384/512Jim Liu
1. Use vendor naming rule to rename each function 2. add SHA 384/512 support Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2024-05-10Merge patch series "Add AM64x Support to PRUSS and PRU_RPROC driver"Tom Rini
MD Danish Anwar <danishanwar@ti.com> says: This series adds AM64x related compatibles to PRUSS and PRU_RPROC drivers. This series is a prerequisite for ICSSG Ethernet driver. Once Support for AM64x is added to PRUSS and PRU_RPROC driver, I'll send another series to enable ICSSG Ethernet driver for AM64x as well.
2024-05-10soc: ti: pruss: Add support for AM64xMD Danish Anwar
Add support for AM64x by adding it's compatible in pruss driver. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-05-10remoteproc: pru: Add support for AM64x PRU / RTU coresMD Danish Anwar
Add support for AM64x PRU cores by adding compatibles for AM64x. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-05-08net: Add drivers for Sysnopsys Ethernet 10G deviceBoon Khai Ng
This driver support the Synopsys Designware Ethernet 10G IP block refer from the driver dwc_eth_qos. The driver MAC register mapping is different between Synopsys QoS IP and Synopsys 10G IP, and thus new file is created meant for Sysnopsys 10G IP. The dwc_eth_xgmac_socfpga.c is specific to a device family, the driver support the specific configuration used in Intel SoC FPGA Agilex5. This driver is extensible for other device family to use. Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
2024-05-07Merge patch series "arm: Add Analog Devices SC5xx Machine Type"Tom Rini
Greg Malysa <greg.malysa@timesys.com> says: This series adds support for the ADI SC5xx machine type and includes two core drivers that are required for being able to boot any board--a UART driver, the gptimer driver which is used as a clock reference (CNTVCNT is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our corresponding Linux support relies on u-boot configuring the clocks correctly before booting, so it is not possible to boot any board without the CGU/CDU configuration happening here. There are also no board files, device trees, or defconfigs included here, but some common definitions that will be used to build board files currently are. The sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended to be a drop-in replacement for the SC594 in terms of peripherals, with a Cortex-A55 instead. Some of the configuration code in dmcinit and clkinit is quite scary and causes a lot of checkpatch violations. It is modified from code initially provided by ADI, but it has not been fully rewritten. There's a question of how important it is to clean up this code--it has some quality violations, but it has been in use (including in production) for over two years and is known to work for performing the low level SoC initialization, while a rewrite might introduce timing or sequence bugs that could take a significant amount of time to detect in the future.
2024-05-07drivers: timer: Add in driver support for ADI SC5XX-family GP timer peripheralGreg Malysa
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Co-developed-by: Angelo Dureghello <angelo.dureghello@timesys.com> Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
2024-05-07drivers: serial: Add in UART for ADI SC5XX-family processorsNathan Barrett-Morrison
Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
2024-05-07drivers: clk: adi: Add in SC5XX-family clock driverNathan Barrett-Morrison
This adds support for the SC5XX clock trees which are required for reading clock speeds on the SoCs. This is largely a port of the same support for Linux, which has not yet been submitted upstream. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
2024-05-07xen: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07watchdog: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Acked-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07w1-eeprom: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07w1: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07virtio: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07video: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07reboot-mode: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07usb: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07ram: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07ufs: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07pwm: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07tpm: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07power: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07timer: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07pinctrl: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07thermal: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07phy: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sysreset: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07pci_endpoint: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sysinfo: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07spmi: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07spi: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sound: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07soc: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07smem: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sm: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07serial: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07scsi: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07rtc: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07reset: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07remoteproc: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07pci: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07pch: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07nvme: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07net: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 18:18:43 +0000