summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-05-07fwu-mdata: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07fuzz: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07fpga: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07firmware: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07fastboot: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07extcon: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07dma: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07dfu: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07demo: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07ddr: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07crypto: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07cpu: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07core: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07clk: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07cache: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07button: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07bus: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07bootcount: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07block: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07bios_emulator: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07axi: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07ata: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07adc: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07mmc: Migrate MMC_SUPPORTS_TUNING to KconfigTom Rini
The constraints on the MMC_SUPPORTS_TUNING symbol can easily be expressed in Kconfig (with the addition of SPL_MMC_SUPPORTS_TUNING). Furthermore, in order to remove <common.h> from the MMC subsystem, the way this symbol is used today needs to be changed in order to continue functioning. Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-06global: Audit usage of <eeprom.h>Tom Rini
The file include/eeprom.h is used only in some legacy non-DM I2C EEPROM access cases. Remove most inclusions of this file as they are not needed. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-06global: Make <asm/global_data.h> include <asm/u-boot.h>Tom Rini
This follows the example of RISC-V where <asm/global_data.h> includes <asm/u-boot.h> directly as "gd" includes a reference to bd_info already and so the first must include the second anyhow. We then remove <asm/u-boot.h> from all of the places which include references to "gd" an so have <asm/global_data.h> already. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-05crypto/fsl: Differentiate between CAAM and DCP in Kconfig entryMarek Vasut
Differentiate between "Enable Random Number Generator support" and "Enable Random Number Generator support" in Kconfig entry, mark the first as CAAM and the second as DCP, otherwise users cannot easily decide which of the options is which and enable the correct one. Signed-off-by: Marek Vasut <marex@denx.de>
2024-05-05crypto/fsl: Introduce SPL_FSL_CAAM_RNGMarek Vasut
Add SPL variant of SPL_FSL_CAAM_RNG so that the SPL_FSL_CAAM_RNG can be disabled in SPL if necessary. This may be necessary due to e.g. size constraints of the SPL. Signed-off-by: Marek Vasut <marex@denx.de>
2024-05-05rng: Introduce SPL_DM_RNGMarek Vasut
Add SPL variant of DM_RNG so that the DM_RNG can be disabled in SPL if necessary. This may be necessary due to e.g. size constraints of the SPL. Signed-off-by: Marek Vasut <marex@denx.de>
2024-05-03spi: npcm_pspi: Reset HW in driver probeJim Liu
Reset HW to clear old status and use default data mode(8-bit). Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2024-05-02spi: cv1800b: Add spi nor flash controller driver for cv1800b SoCKongyang Liu
Add spi nor flash controller driver for cv1800b SoC Signed-off-by: Kongyang Liu <seashell11234455@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-05-01board: milkv_duo: Add init code for Milk-V Duo ethernetKongyang Liu
Initialize register in cv1800b ethernet phy to make it compatible with generic phy driver Signed-off-by: Kongyang Liu <seashell11234455@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-05-01sysreset: cv1800b: Add sysreset driver for cv1800b SoCKongyang Liu
Add sysreset driver for cv1800b SoC Signed-off-by: Kongyang Liu <seashell11234455@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-05-01mmc: cv1800b: Add transmit tap delay config to fix write errorKongyang Liu
Currently, only the receive delay is configured while the transmit delay is not set, which may result in errors when writing to the file. This issue can be resolved by setting PHY_TX_SRC_INVERT to SDHCI_PHY_TX_RX_DLY. Signed-off-by: Kongyang Liu <seashell11234455@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2024-04-29Merge patch series "Fix MMC tuning algorithm"Tom Rini
Judith Mendez <jm@ti.com> says: The following patch series includes a MMC tuning algorithm fix according to the following published paper [0]. This seris also includes fixes for OTAP/ITAP delay values in j721e_4bit_sdhci_set_ios_post and for HS400 mode. For DDR52 mode, also set ENDLL=1 and call am654_sdhci_setup_dll() instead of am654_sdhci_setup_delay_chain() according to device datasheet[1]. [0] https://www.ti.com/lit/an/spract9/spract9.pdf [1] https://www.ti.com/lit/ds/symlink/am62p.pdf
2024-04-29mmc: am654_sdhci: Fix ITAPDLY for HS400 timingJudith Mendez
At HS400 mode the ITAPDLY value is that from High Speed mode which is incorrect and may cause boot failures. The ITAPDLY for HS400 speed mode should be the same as ITAPDLY as HS200 timing after tuning is executed. Add the functionality to save ITAPDLY from HS200 tuning and save as HS400 ITAPDLY. Fixes: c964447ea3d6 ("mmc: am654_sdhci: Add support for input tap delay") Signed-off-by: Judith Mendez <jm@ti.com>
2024-04-29mmc: am654_sdhci: Set ENDLL=1 for DDR52 modeJudith Mendez
According to the device datasheet [0], ENDLL=1 for DDR52 mode, so call am654_sdhci_setup_dll() and write itapdly after since we do not carry out tuning. [0] https://www.ti.com/lit/ds/symlink/am62p.pdf Fixes: c964447ea3d6 ("mmc: am654_sdhci: Add support for input tap delay") Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2024-04-29mmc: am654_sdhci: Add itap_del_ena[] to store itapdlyena bitJudith Mendez
Set itap_del_ena if ITAPDLY is found in DT or if the tuning algorithm was executed and found the optimal ITAPDLY. Add the functionality to save ITAPDLYENA that can be referenced later by storing the bit in array itap_del_ena[]. Signed-off-by: Judith Mendez <jm@ti.com>
2024-04-29mmc: am654_sdhci: Fix OTAP/ITAP delay valuesNitin Yadav
U-Boot is failing to boot class U1 UHS SD cards due to incorrect OTAP and ITAP delay select values. Update OTAP and ITAP delay select values from DT. Fixes: c7d106b4eb3 ("mmc: am654_sdhci: Update output tap delay writes") Signed-off-by: Nitin Yadav <n-yadav@ti.com> Signed-off-by: Judith Mendez <jm@ti.com>
2024-04-29mmc: am654_sdhci: Add tuning algorithm for delay chainJudith Mendez
Currently the sdhci_am654 driver only supports one tuning algorithm which should be used only when DLL is enabled. The ITAPDLY is selected from the largest passing window and the buffer is viewed as a circular buffer. The new tuning algorithm should be used when the delay chain is enabled; the ITAPDLY is selected from the largest passing window and the buffer is not viewed as a circular buffer. This implementation is based off of the following paper: [1]. Also add support for multiple failing windows. [1] https://www.ti.com/lit/an/spract9/spract9.pdf Fixes: a759abf569d4 ("mmc: am654_sdhci: Add support for software tuning") Signed-off-by: Judith Mendez <jm@ti.com>
2024-04-29power: pmic: tps65941: Update compatible to aling with kernel DTUdit Kumar
Linux kernel driver drivers/mfd/tps6594-i2c.c is using different name for compatible for tps6594 family PMIC. After sync of Linux kernel DT to u-boot for TI platforms J7200, J721S2 and J784S4 PMIC is no longer getting probed. So updating compatible field to align with Linux driver and DT. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2024-04-29power: regulator: tps65941: Add TPS65224 PMIC regulator supportBhargav Raviprakash
Reuse TPS65941 regulator driver to adds support for TPS65224 PMIC's regulators. 4 BUCKs and 3 LDOs, where BUCK1 and BUCK2 can be configured in dual phase mode. Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2024-04-29power: regulator: tps65941: use function callbacks for conversion opsBhargav Raviprakash
Use function callbacks for volt2val, val2volt and slewrate lookups. This makes it easier to add support for TPS65224 PMIC regulators. Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2024-04-29power: regulator: tps65941: Added macros for BUCK IDBhargav Raviprakash
Adds macros for buck and ldo ids and switched to using switch case instead of if else in probe functions. Helps in adding support for TPS65224 PMIC. Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2024-04-29power: pmic: tps65941: Add TI TPS65224 PMICBhargav Raviprakash
Adds compatible and data field values of TPS65224 driver in TPS65941 PMIC driver. Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2024-04-26Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini
2024-04-26Merge tag 'u-boot-rockchip-20240426' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip Please pull the updates for rockchip platform: - dts sync for rk3308; - sdram: Support getting banks from TPL for rk3568 and rk3588; - dts and config clean and sync up for rk3568/rk3588; - Other misc fixes; CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/20543
2024-04-26rockchip: io-domain: Add support for RK3328Jonas Karlman
Port the RK3328 part of the Rockchip IO-domain driver from linux. This differs from linux version in that pmu io iodomain bit is enabled in the write ops instead of in an init ops as in linux, this way we can avoid keeping a full state of all supply that have been configured. Enable by default on all RK3328 boards, skip rk3328-evb because this target is typically also used on miscellaneous boards and boxes not fully supported by U-Boot. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-04-26mmc: rockchip_sdhci: Fix 4 blocks PIO mode read limit for RK35xxJonas Karlman
The commit 2cc6cde647e2 ("mmc: rockchip_sdhci: Limit number of blocks read in a single command") introduced a limit of number of blocks to read to fix a Data End Bit Error on RK3568 and RK3588. This had a side affect of significant slowing down reading FIT from eMMC. After the commit 6de9d7b2f13c ("rockchip: rk35xx: Enable eMMC HS200 mode by default") the limit of number of blocks to read workaround is no longer necessary and at HS200+ a Data End Bit Error is no longer happening using PIO mode. Change this limitation to allow reading more than 4 blocks with a single CMD18 command in PIO mode at HS200+ speed, keep using the 4 blocks limitation when loadig FIT from eMMC at lower speed than HS200. Fixes: 2cc6cde647e2 ("mmc: rockchip_sdhci: Limit number of blocks read in a single command") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-04-26clk: rockchip: rk356x: Fix set rate of SCLK_SFC clockJonas Karlman
The SCLK_SFC can be set to a rate of 24, 50, 75, 100, 125 or 150 MHz. However, clk_set_rate() will fail unless one of those exact rates are used, and with newer and updated device tree files that contain spi-max-frequency values that does not exactly match these rates use of SPI flash may fail. Fix this by using the highest possible rate that exceeds or is equal to the requested rate. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 19:10:30 +0000