| Age | Commit message (Collapse) | Author |
|---|
|
Simon Glass <sjg@chromium.org> says:
This little series reprises the EFI-video fix, fixes a USB problem and
enables a boot script for coreboot.
It also moves to truetype fonts for coreboot and qemu-x86, since the
menus look much better and there are no strong size constraints.
With these changes it is possible to boot a Linux distro automatically
with U-Boot on x86, including when U-Boot is the second-stage
bootloader.
|
|
This is needed to support Truetype fonts. In any case, the compiler
expects SSE to be available in 64-bit mode. Provide an option to enable
SSE so that hardware floating-point arithmetic works.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Saving and restoring entries is used for expo and for the command line,
which we don't use in SPL. Drop these methods.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
|
|
The ANSI codes are not correctly handled at present, in that the
requested X position is added to the current one.
Correct this and also call vidconsole_entry_start() to start a new text
line.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
|
|
This hunk of the patch was missed when using "b4" to apply the series.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Simon Glass <sjg@chromium.org> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
|
|
It is possible to boot a kernel without CMDLINE being enabled. Update
the implementation to handle this, and drop the condition from the
FASTBOOT config.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Given the name of this variable, it should be an address, not a
pointer. Update this, to make it easier to use with sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Dmitrii Merkurev <dimorinny@google.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2024.07-rc1
xilinx:
- Do not call env_get_location when !ENV_IS_NOWHERE
- Add FDT_FIXUP_PARTITIONS support
- Fix legacy format MAC decoding
zynqmp:
- Enable semihosting SPL support
- DT updates
- Kconfig resort/cleanup
- Don't describe second image/capsule if !SPL
- Add support for dfu/capsule description via MTD
- Support JTAG as alternative boot mode
- Add support for TEG soc variant
zynqmp-kria:
- Wire usb4 boot device
- Update SDIO tristate pin configuration
- Disable SPI_FLASH_BAR to avoid issue with SPI after update
mbv:
- Enable SPL and binman
- Small platform changes
zynqmp-nand:
- Error out in case of unsupported SW ECC
- Clean error path
versal-net:
- Support multiple locations for variables
|
|
Missing line-feeds in error messages lead to output like:
phy_startup() failed: -110FAILED: -110=>
Output like the following is much easier to read:
phy_startup() failed: -110
FAILED: -110
=>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
There is no need to export goldfish_rtc_probe().
Fixes: 2d6dc19fd25d ("rtc: driver for Goldfish RTC")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
cpu_get_desc() for the RISC-V CPU currently reads "riscv,isa" to get
the description, but it is no longer a required property and cannot be
assummed to always be present, as the new "riscv,isa-extensions" and
"riscv,isa-base" properties may be present instead.
On RISC-V, cpu_get_desc() has two main uses - firstly providing an
informational name for the CPU for smbios or at boot with
DISPLAY_CPUINFO etc and secondly it forms the basis of ISA extension
detection in supports_extension() as it returns (a portion of) an ISA
string.
cpu_get_desc() returns a string, which aligned with "riscv,isa" but
the new property is a list of strings. Rather than add support for
the list of strings property, which would require creating an isa
string from "riscv,isa-extensions", modify the RISC-V CPU's
implementaion of cpu_get_desc() return the first compatible as the
cpu description instead. This may be fine for the informational cases,
but it would break extension dtection, given supports_extension()
expects cpu_get_desc() to return an ISA string.
Call dev_read_string() directly in supports_extension() to get the
contents of "riscv,isa" so that extension detection remains functional.
As a knock-on affect of this change, extension detection is no longer
broken for long ISA strings. Previously if the ISA string exceeded the
32 element array that supports_extension() passed to cpu_get_desc(),
it would return ENOSPC and no extensions would be detected.
This bug probably had no impact as U-Boot does not currently do anything
meaningful with the results of supports_extension() and most SoCs
supported by U-Boot don't have anywhere near that complex of an ISA
string. The QEMU virt machine's CPUs do however, so extension detection
doesn't work there.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Add sdhci driver for cv1800b SoC.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon
- Ethernet, i2c, and USB support are now enabled by default
- The clock driver gets some bug fixes and cleanup
- Invalid FDTs are now properly detected in board_fdt_blob_setup().
- The pinctrl driver gains preparatory support for per-pin function
muxes.
- Support is added for two generations of Qualcomm HighSpeed USB PHY
- A power domain driver is added for the Globall Distributed Switch
Controllers on the GCC hardware block.
- SDM845 gains USB host mode support.
- OF_LIVE is enabled by default for Qualcomm platforms
- Some U-Boot devicetree compatibility fixups are added during init to
improve compatbility with upstream DT.
|
|
- kirkwood: Switch to using upstream dts/dtsi files (Tony)
- mvebu: Turris Omnia - New board revision support (Marek)
|
|
|
|
When using OF_LIVE, the debug UART driver won't be probed if it's a
subnode of the geni-se-qup controller. Add a NOP driver for the
controller to correctly discover its child nodes.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The .direction_input and .direction_output ops are deprecated, and don't
seem to behave properly for us. Implement our own .set_flags op to
handle this correctly.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Most devices only initialise the USB clocks for us if we boot via
"fastboot boot", add the missing clock configuration to get both USB
ports working regardless of the bootloader state.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Define the GDSC power domains for SDM845.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The RCG registers always have the same offsets, so only store the base
CMD register address and calculate the others relative to that.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Some devices like the UART and clock controller reference an RPM(h)
power domain. We don't support this device in U-Boot, so add
DM_FLAG_DEFAULT_PD_CTRL_OFF to tell DM core not to try and enable the
power domain.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Some Qualcomm SoCs newer than SDM845 feature a so-called "7nm phy"
driver, notable the SM8250 SoC which will gain U-Boot support in
upcoming patches.
Introduce a driver based on the Linux driver.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[code cleanup, align symbol names with Linux, switch to clk/reset_bulk APIs]
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The Snapdragon 845 and several other Qualcomm SoCs feature this
USB high-speed phy. Add a driver for it based on the Linux driver, with
support for the SDM845, and the QCM2290 and SM6115 SoCs which will gain
support in U-Boot in future patches.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[code cleanup, switch to clk_bulk]
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This patch is the preparation for SM8150 support. This new SoC
depending on the particular pin can have different numbers for the
same function. For example "rgmii" function for GPIO4 has id=2 while
for GPIO59 it has id=1. So, to support this type of SoCs,
get_function_mux() callback needs to know for which pin the function
is requested.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Now sub-drivers for particular SoCs can register them as power domain
drivers. This is needed for upcoming SM8150 support, because it needs
to power up the Ethernet module.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
[caleb: make ARCH_SNAPDRAGON select POWER_DOMAIN]
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The current behaviour does a bitwise OR of the previous and new
divider values, this is wrong as some bits may be set already. We
need to clear all the divider bits before applying new ones.
This fixes potential issue with 1Gbit ethernet on SA8155P-ADP boards.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[caleb: minor wording fix]
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
ID code is added for zu3teg variant.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240402142314.7353-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Add support for true random number generator provided by the MCU on
Turris Omnia. The MCU firmware supports TRNG if the FEAT_TRNG bit is set
in features. In that case we bind the rng driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Add support for system power off via UCLASS_SYSRESET. Newer versions of
Turris Omnia MCU firmware can power off the board (MCU will disable
almost all voltage regulators and go into low power mode).
Move the MCU driver into drivers/misc and register it under UCLASS_MISC.
The sysreset and gpio device are bound as child devices of the MCU device.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Update firmware features reading to try reading 32 bits of features and
fallback to reading 16 bits.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Use byteorder conversion function instead of manually assembling data
from/to MCU.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Add header containing all MCU command definitions and use it in board
code and in MCU driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-next-20240402
- Implement Qualcomm wrapper for dwc3
- Multiple sector size support for UMS
- CDC ACM gadget initialization fix
- Refactor board code from dwc3 to prepare better interrupt support
- Bugfix for for qcom-smmu when compiling with -DDEBUG
|
|
Merge in all changes from the next branch now that the release is out.
|
|
dm_usb_gadget_handle_interrupts
The only call site of dwc3_uboot_handle_interrupt() is the
dm_usb_gadget_handle_interrupts(), fold the former into the
later. This makes dwc3_uboot_handle_interrupt() unavailable
to be called from board code as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240317044357.547037-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
The dm_usb_gadget_handle_interrupts() has no place in board code. Move
this into DWC3 driver. The OMAP implementation is special, add new weak
dwc3_uboot_interrupt_status() function to decide whether DWC3 interrupt
handling should be called, and override it in OMAP DWC3 code, to repair
the special OMAP interrupt handling code until OMAP gets switched over
to DM UDC proper.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # qcom sdm845
Link: https://lore.kernel.org/r/20240317044357.547037-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Change to regulator_set_enable_if_allowed to avoid enable failure,
in case same phy supply shared by multiple FEC controllers.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
imx_tmu_arch_init does not implement for iMX8MQ, error is returned
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
Add a new kconfig option to allow non-secure world access
to the CAAM Job Ring.
This is needed, for example, when running linux without
OP-TEE services, as it's done on Colibri iMX7.
Fixes: 51f1357f3428 ("Revert "drivers/crypto/fsl: assign job-rings to non-TrustZone"")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
|
|
Fix spelling errors in comments.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
|
|
Pull the PHY GPIO reset code into separate function, since
this is and will be reused multiple times. Set up default
reset assert and deassert timing to generous 20ms and 1ms
for maximum compatibility in case those DT properties are
missing.
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
This patch adds support for i225-IT in e1000 driver.
Add e1000_phy_igc.
Signed-off-by: Marjolaine Amate <marjolaine.amate@odyssee-systemes.fr>
|
|
From the ethernet header is not on aligned, because the length
of the ethernet header is 14 bytes.
Therefore, unaligned access must be done here.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
|
|
There is no need to perform the endian twice here.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
They are not required to be global, make them static.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
|
|
3 operations needed by `net stats` are implemented. New `net stats`
output some useful info.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
|
|
register internal MDIO bus device if it is a subnode.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
|
|
shrink the first argument of log_msg_ret(), add dev_xxx() functions for
error reporting.
Fixes: 9d8f78a2a79f7 ("net: add hifemac Ethernet driver for HiSilicon platform")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
|
|
The initial commit used log_msg_ret() wrongly. Fix that by moving error
report to a separate dev_err() call and shrink the first argument of
log_msg_ret() to no more than 4 chars.
Fixes: 6b5c8d98e204 ("net: add hifemac_mdio MDIO bus driver for HiSilicon platform")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
|
