summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-28sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS OcteonStefan Roese
This patch enables the usage of the MVEBU AHCI/SATA driver. The only changes necessary to support MIPS Octeon via DT based probing are, to add the compatible DT property and the use of dev_remap_addr() so that the correct mapped address is used in the Octeon case (phys != virt). Please note that this driver supports the usage of the "scsi" command and not the "sata" command, since it does not provide an own "scan" function, which is needed for the "sata" cmd support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28serial: serial_octeon_bootcmd.c: Add PCI remote console supportStefan Roese
This patch adds the PCI bootcmd feature for MIPS Octeon, which will be used by the upcoming Octeon III NIC23 board support. It enables the use of the "oct-remote-load" and "oct-remote-bootcmd" on host PC's to communicate with the PCIe target and load images into the onboard memory and issue commands. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28serial: serial_octeon_pcie_console.c: Add PCI remote console supportStefan Roese
This patch adds the PCI remote console feature for MIPS Octeon, which will be used by the upcoming Octeon III NIC23 board support. It enables the use of the "oct-remote-console" tool on host PC's to communicate with the PCIe target. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: Add Octeon PCIe host controller driverStefan Roese
This patch adds the PCIe host controller driver for MIPS Octeon II/III. The driver mainly consist of the PCI config functions, as all of the complex serdes related port / lane setup, is done in the serdes / pcie code available in the "arch/mips/mach-octeon" directory. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: Misc changes required because of the newly added headersStefan Roese
With the newly added headers and their restructuring (which macro is defined where), some changes in the already existing Octeon files are necessary. This patch makes the necessary changes. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-27Merge branch '2021-04-27-assorted-fixes'Tom Rini
- An assortment of bug fixes
2021-04-27reset: fix reset_get_by_index_nodev index handlingNeil Armstrong
This fixes an issue getting resets index 1 and 3+, the spurius "> 0" made it return the index 0 or 1, whatever index was passed. The dm_test_reset_base() did not catch it, but the dm_test_reset_base() extension catches it and this fixes the regression. This also fixes a reggression on Amlogic G12A/G12B SoCs, where HDMI output was disable even when Linux was booting. Fixes: ea9dc35aab ("reset: Get the RESET by index without device") Reported-by: B1oHazard <ty3uk@mail.ua> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-27pinctrl: single: fix a never true comparisonDario Binacchi
As reported by Coverity Scan for Das U-Boot, the 'less-than-zero' comparison of an unsigned value is never true. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2021-04-27pinctrl: single: check function mask to be non-zeroDario Binacchi
Otherwise it can generate a division by zero, which has an undefined behavior. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-04-27allow opting out of WATCHDOG_RESET() from timer interruptRasmus Villemoes
Having WATCHDOG_RESET() called automatically from the timer interrupt runs counter to the idea of a watchdog device - if the board runs into an infinite loops with interrupts still enabled, the watchdog will never fire. When using CONFIG_(SPL_)WDT, the watchdog_reset function is a lot more complicated than just poking a few SOC-specific registers - it involves accessing all kinds of global data, and if the interrupt happens at the wrong time (say, in the middle of an WATCHDOG_RESET() call from ordinary code), that can end up corrupting said global data. Allow the board to opt out of calling WATCHDOG_RESET() from the timer interrupt handler by setting CONFIG_SYS_WATCHDOG_FREQ to 0 - as that setting is currently nonsensical (it would be compile-time divide-by-zero), it cannot affect any existing boards. Add documentation for both the existing and extended meaning of CONFIG_SYS_WATCHDOG_FREQ. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-27timer: mpc83xx_timer: fix build with CONFIG_{HW_, }WATCHDOGRasmus Villemoes
The code, which is likely copied from arch/powerpc/lib/interrupts.c, lacks a fallback definition of CONFIG_SYS_WATCHDOG_FREQ and refers to a non-existing timestamp variable - obviously priv->timestamp is meant. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-27watchdog: use time_after_eq() in watchdog_reset()Rasmus Villemoes
Some boards don't work with the rate-limiting done in the generic watchdog_reset() provided by wdt-uclass. For example, on powerpc, get_timer() ceases working during bootm since interrupts are disabled before the kernel image gets decompressed, and when the decompression takes longer than the watchdog device allows (or enough of the budget that the kernel doesn't get far enough to assume responsibility for petting the watchdog), the result is a non-booting board. As a somewhat hacky workaround (because DT is supposed to describe hardware), allow specifying hw_margin_ms=0 in device tree to effectively disable the ratelimiting and actually ping the watchdog every time watchdog_reset() is called. For that to work, the "has enough time passed" check just needs to be tweaked a little to allow the now==next_reset case as well. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-26Merge https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
- RCar3 improvements
2021-04-26net: sun8i-emac: Fix pinmux setup for Allwinner H5Andre Przywara
Commit eb5a2b671075 ("net: sun8i-emac: Determine pinmux based on SoC, not EMAC type") switched the pinmux setup over to look at CONFIG_MACH_SUN* symbols, to find the appropriate mux value. Unfortunately this patch missed to check for the H5, which is pin-compatible to the H3, but uses a different Kconfig symbol (because it has ARMv8 vs. ARMv7 cores). Replace the pure SUN8I_H3 symbol with the joint SUNXI_H3_H5 one, which is there to cover the peripherals common to both SoCs. Also explicitly list each supported SoC, and have an error message in the fallback case, to avoid those problems in the future. This fixes Ethernet support on all H5 boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Samuel Holland <samuel@sholland.org> # Orange Pi PC2 Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-25clk: renesas: Synchronize Gen2 MSTP teardown tablesMarek Vasut
Synchronize Gen2 MSTP teardown tables with datasheet Rev.2.00 Feb 01, 2016. This corrects the following bits: - added H2 MSTP3[10] SCIF2 - added H2/M2/E2 MSTP7[29] TCON - removed E2 MSTP5[22] Thermal Sensor - removed E2 MSTP10[31,24:22] SRC0, SRC7:9 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2021-04-25clk: renesas: Only ever access documented bits in clock driver teardownMarek Vasut
The clock driver used a heavy-handed approach where it turned off all available clocks, while also possibly setting bits which are not documented in the R-Car datasheet. Update the tables so that only the bits which are documented are set or cleared when tearing down the clock driver. Note that the only clock left running before booting Linux are now MFIC, INTC-AP, INTC-EX and SCIF2 / SCIF0 on V3x. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2021-04-24Merge tag 'mips-pull-2021-04-24' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-mips - MIPS: octeon: fix minor bugs of initial merge - MIPS: octeon: add support for QLM and PCI-E controller - MIPS: octeon: add support for AHCI and SATA - MIPS: octeon: add E1000 ethernet support - MIPS: octeon: add Octeon III NIC23 board - ata/scsi: add support for Big Endian platforms
2021-04-24video: sunxi: de2: switch to public uclass functionsJernej Skrabec
Currently DE2 driver uses functions which are defined in internal headers. They are not meant to be used outside of uclass framework. Switch DE2 driver to public ones. This has additional benefit that device_probe doesn't need to be called manually. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-24video: sunxi: dw-hdmi: read source_id laterJernej Skrabec
There is no real need to read source_id at probe time. It also doesn't make sense to store it in driver private data since it's already stored in class platform data. While this looks like cleanup (and it is), it's also important for DE2 driver rework because this info will be filled later (after probe is already executed). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-24video: sunxi: Remove TV probe from DE2Jernej Skrabec
TV driver was never fully implemented. Remove search for it from DE2 driver. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-24video: sunxi: Remove check for ddc-i2c-bus propertyJernej Skrabec
No Allwinner board with DW-HDMI controller use separate I2C bus for EDID read. Remove that check. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-24video: sunxi: Use DW-HDMI hpd functionJernej Skrabec
It turns out that there are two ways how hot plug detection can be done. One is standard way for DW HDMI controller - checking bit 2 in 0x3004 register. Another way is applicable only to Allwinner custom PHY - by checking bit 19 in register 0x10038. Both methods are equally good as far as we know. Use standard method in order to reduce amount of custom code. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-24video: sunxi: Add mode_valid callback to sunxi_dw_hdmiJernej Skrabec
Currently driver accepts all resolution which won't work on 4k screens. Add validation callback which limits acceptable resolutions to 297 MHz. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-23scsi: Add ata_swap_buf_le16() to support big-endian platformsStefan Roese
Otherwise the output will look like this on MIPS Octeon NIC23: Device 0: (0:0) Vendor: ATA Prod.: aSDnsi klUrt aII Rev: 4X11 Type: Hard Disk Capacity: 457862.8 MB = 447.1 GB (937703088 x 512) instead of this version: Device 0: (0:0) Vendor: TA Prod.: SanDisk Ultra II Rev: X411 Type: Hard Disk Capacity: 457862.8 MB = 447.1 GB (937703088 x 512) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23ata: ahci: Fix usage on big-endian platformsStefan Roese
This patch adds a few missing virt_to_phys() to use the correct physical address for DMA operations in the common AHCI code. This is done to support the big-endian MIPS Octeon platform. Additionally the code a cleaned up a bit (remove some empty lines) and made a bit better readable. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS OcteonStefan Roese
This patch enables the usage of the MVEBU AHCI/SATA driver. The only changes necessary to support MIPS Octeon via DT based probing are, to add the compatible DT property and the use of dev_remap_addr() so that the correct mapped address is used in the Octeon case (phys != virt). Please note that this driver supports the usage of the "scsi" command and not the "sata" command, since it does not provide an own "scan" function, which is needed for the "sata" cmd support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23serial: serial_octeon_bootcmd.c: Add PCI remote console supportStefan Roese
This patch adds the PCI bootcmd feature for MIPS Octeon, which will be used by the upcoming Octeon III NIC23 board support. It enables the use of the "oct-remote-load" and "oct-remote-bootcmd" on host PC's to communicate with the PCIe target and load images into the onboard memory and issue commands. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23serial: serial_octeon_pcie_console.c: Add PCI remote console supportStefan Roese
This patch adds the PCI remote console feature for MIPS Octeon, which will be used by the upcoming Octeon III NIC23 board support. It enables the use of the "oct-remote-console" tool on host PC's to communicate with the PCIe target. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: Add Octeon PCIe host controller driverStefan Roese
This patch adds the PCIe host controller driver for MIPS Octeon II/III. The driver mainly consist of the PCI config functions, as all of the complex serdes related port / lane setup, is done in the serdes / pcie code available in the "arch/mips/mach-octeon" directory. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: Misc changes required because of the newly added headersStefan Roese
With the newly added headers and their restructuring (which macro is defined where), some changes in the already existing Octeon files are necessary. This patch makes the necessary changes. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
2021-04-23clk: Fix typo in Zynq Kconfig symbol descriptionMichal Simek
Trivial typo fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-22usb: ehci-hcd: Add IAA handshake for removing async QHYe Li
According to EHCI spec, software needs to do handshake with HC for safely removing QH from async list. This handshake is implemented by setting IAAD (Interrupt on Async Advance Doorbell) bit in USB_USBCMD register and poll the IAA (Interrupt on Async Advance bit) in the USB_USBSTS to ensure the HC has released all on-chip state that may potentially reference one of the data structures just removed. Current codes only check active status of the last QTD, but this can't ensure the QH is released from HC. We can meet unrecoverable "EHCI timed out on TD" errors when running UEFI SCT tests on USB disk. The USB_ASYNCLISTADDR register is changed to a invalid address when the issue happens. It is fixed after adding the IAA handshake. Steps to reproduce the issue: 1. Build the UEFI SCT from https://github.com/tianocore/edk2-test 2. Build the EDK2 UEFI Shell from https://github.com/tianocore/edk2 3. Copy SCT files and Shell.efi to USB disk FAT partition 4. Load the Shell.efi from USB FAT, and run bootefi to execute it 5. After booting into Shell, enter the SCT directory and run "sct -a" to execute all tests. 6. Tests run about 1 hour and stop with many EHCI timeout errors like EHCI timed out on TD - token=0x801f8c80 Signed-off-by: Ye Li <ye.li@nxp.com>
2021-04-22mmc: octeontx_hsmmc: Add support for MIPS OcteonStefan Roese
Until now, the Octeontx MMC driver did only support the ARM Octeon TX/Tx2 platforms. This patch adds support for the MIPS Octeon platform to this driver. Here a short summary of the changes: - Enable driver compilation for MIPS Octeon, including the MMC related header file - Reorder header inclusion - Switch to using the clk framework to get the input clock - Remove some functions for MIPS Octeon, as some registers don't exist here Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-22net: jr2: Fix Serdes6G configurationHoratiu Vultur
Sometimes no traffic was getting out on the ports, the root cause was a wrong configuration of the Serdes6G, which is used on jr2 pcb111. This patch fixes this issue by applying the correct configuration. Fixes: 5e1d417bec92ac ("net: Add MSCC Jaguar2 network driver.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-22net: jr2: Reset switchHoratiu Vultur
Make sure to reset the switch core at probe time. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-20sysreset: provide type of reset in do_reset cmdIgor Opaniuk
Add additional param for reset cmd, which provides type of reset. Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-04-20sysreset: psci: use psci driver exported functionsIgor Opaniuk
Use psci driver exported functions for reset/poweroff, instead of invoking directly invoke_psci_fn. Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-04-20psci: add features/reset2 supportIgor Opaniuk
Adds support for: * PSCI_FEATURES, which was introduced in PSCI 1.0. This provides API that allows discovering whether a specific PSCI function is implemented and its features. * SYSTEM_RESET2, which was introduced in PSCI 1.1, which extends existing SYSTEM_RESET. It provides support for vendor-specific resets, providing reset_type as an additional param. For additional details visit [1]. Implementations of some functions were borrowed from Linux PSCI driver code [2]. [1] https://developer.arm.com/documentation/den0022/latest/ [2] drivers/firmware/psci/psci.c Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-04-20net: calxedagmac: Convert to DM_ETHAndre Przywara
To squash that nasty warning message and make better use of the newly gained OF_CONTROL feature, let's convert the calxedagmac driver to the "new" driver model. The conversion is pretty straight forward, mostly just adjusting the use of the involved data structures. The only actual change is the required split of the receive routine into a receive and free_pkt part. Also this allows us to get rid of the hardcoded platform information and explicit init calls. This also uses the opportunity to wrap the code decoding the MMIO register base address, to make it safe for using PHYS_64BIT later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-20power: regulator: add driver for ANATOP regulatorYing-Chun Liu (PaulLiu)
Anatop is an integrated regulator inside i.MX6 SoC. There are 3 digital regulators which controls PU, CORE (ARM), and SOC. And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB). This patch adds the Anatop regulator driver. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-20net: octeontx: smi: fix mii probeTim Harvey
The fdt node offset is apparently not set properly when probed causing no MDIO busses to be found. Fix this by obtaining the offset. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-20drivers: ata: ahci: update max id if it is more than available portsSuneel Garapati
After check for maximum between max id and available ports, also check if available port count is less than max id and update. In the case of the CN8030 OcteonTX SoC max_id needs to be reduced to the number of ports found otherwise the following occurs on a scan: GW6404-B> scsi scan scanning bus for devices... Target spinup took 0 ms. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: 64bit ncq ilck stag pm led clo only pmp fbss pio slum part ccc apst Device 0: (0:0) Vendor: ATA Prod.: SanDisk SD8SFAT0 Rev: Z233 Type: Hard Disk Capacity: 61057.3 MB = 59.6 GB (125045424 x 512) "Synchronous Abort" handler, esr 0x96000006 elr: 000000000052f824 lr : 000000000052fa10 (reloc) elr: 000000007fee9824 lr : 000000007fee9a10 x0 : 0000000000000001 x1 : 0000000000000001 x2 : 000000007bea3528 x3 : 000000007bea3580 x4 : 0000000000000200 x5 : 0000000000000000 x6 : 0000000000000002 x7 : 000000007bea3540 x8 : 00000000fffffff8 x9 : 0000000000000008 x10: 00000000000186a0 x11: 000000000000000d x12: 0000000000000006 x13: 000000000001869f x14: 0000000000000007 x15: 00000000ffffffff x16: 000000007ff439a5 x17: 000000007ff5730c x18: 000000007bea9de0 x19: 000000007ff7a580 x20: 000000007bec79f8 x21: 0000000000000000 x22: 000000007bea3580 x23: 0000000000000000 x24: 0000000000000000 x25: 000000007bec7a00 x26: 00000000ffffffc0 x27: 000000007bec79d0 x28: 000000007beb51c0 x29: 000000007bea3480 Code: 91246800 940130c2 12800000 1400004f (b9402ae0) Resetting CPU ... Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-20drivers: net: octeontx: fix QSGMIITim Harvey
Revert a change that occured between the Marvell SDK-10.1.1.0 and SDK-10.3.1.1 which broke QSMII phy support. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-20Fix IDE commands issued, fix endian issues, fix non MMIOReinoud Zandijk
Fixes IDE issues found on the Malta board under Qemu: 1) DMA implied commands were sent to the controller in stead of the PIO variants. The rest of the code is DMA free and written for PIO operation. 2) direct pointer access was used to read and write the registers instead of the inb/inw/outb/outw functions/macros. Registers don't have to be memory mapped and ATA_CURR_BASE() does not have to return an offset from address zero. 3) Endian isues in ide_ident() and reading/writing data in general. Names were corrupted and sizes misreported. Tested malta_defconfig and maltael_defconfig to work again in Qemu. Signed-off-by: Reinoud Zandijk <reinoud@NetBSD.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20misc: make CONFIG_IRQ selectable for all platformsWasim Khan
UCLASS_IRQ driver is not Intel specific. Make CONFIG_IRQ selectable for all platforms. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-20phy: meson-g12a-usb3-pcie: add support for PCIe opsNeil Armstrong
Add the PCIe part of the G12A USB3 PCIe Combo PHY driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-20clk: meson-g12a: add PCIe gatesNeil Armstrong
Add missing gates used for PCIe. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-19gpio: atmel_pio4: add support for sama7g5 pio4 version with 5 banksEugen Hristev
Add support for sama7g5 pinctrl variant, with 5 banks with a degraded 8 line only 5th bank. Based on Linux Kernel implementation. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-04-18Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
This is a patchset which makes away with the .bind() controller indexing workaround which was broken since before v2021.04, and then adds PHY support and MX8M support on top of that. Better add it into the release early to get as much testing as possible done, because this really does a lot of changes to the ehci-mx6 driver.
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-04 18:36:56 +0000