summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-12-20sysreset: at91: add compatible with microchip, sama7g5-rstcEugen Hristev
As documented in bindings doc in kernel 6.0: https://elixir.bootlin.com/linux/v6.0/source/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-12-08mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulationBalamanikandan Gunasundar
Add helper functions for atmel Static Memory Controller. The functions are required to configure SMC. This file is inherited from the work done by Boris Brezillon for Linux Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08memory: atmel-ebi: add Atmel EBI (External Bus Interface) driverBalamanikandan Gunasundar
The EBI is used to access peripherals like NAND, SRAM, NOR etc. Add this driver to probe the nand flash controller. This is a dummy driver and not yet a complete device driver for EBI. Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08nand: atmel: Add pmecc driverBalamanikandan Gunasundar
Add driver for atmel pmecc. This implementation is ported from Linux. The reference taken is linux-5.4-at91. Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08nand: atmel: Add DM based NAND driverBalamanikandan Gunasundar
This implementation is ported from the rework done by Boris Brezillon in Linux. This porting is done based on linux-5.4-at91. The driver is tested in sam9x60ek, sama5d3_xplained, sam9x75eb and sama7g54-ddr3-eb. Changes done includes - Adapt GPIO descriptor apis for U-Boot. Use gpio_request_by_name_nodev, dm_gpio_get_value etc. - Use U_BOOT_DRIVER instead of platform_driver. - Replace struct platform_device with struct udevice - Check the status of nfc exec operation by polling the status register instead of interrupt based handling - DMA operations not supported. Remove it - Adapt DT parsing to U-Boot APIs Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-05post: Migrate to KconfigTom Rini
We move the existing CONFIG_POST_* functionality over to CFG_POST and then introduce CONFIG_POST to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05sandbox: Rework how SDL is enabled / disabledTom Rini
Given that we can use Kconfig logic directly to see if we have a program available on the host or not, change from passing NO_SDL to instead controlling CONFIG_SANDBOX_SDL in Kconfig directly. Introduce CONFIG_HOST_HAS_SDL as the way to test for sdl2-config and default CONFIG_SANDBOX_SDL on if we have that, or not. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ftmac100: Remove non-DM_ETH codeTom Rini
At this point all users of this driver enable DM_ETH, so remove the legacy code paths. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-12-05Convert CONFIG_VSC7385_ENET et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_VSC7385_ENET CONFIG_VSC9953 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_USB_GADGET_AT91 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_GADGET_AT91 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_TPS6586X_POWER et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TPS6586X_POWER CONFIG_TWL6030_POWER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_SPD_EEPROM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPD_EEPROM Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_SMSC_LPC47M et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SMSC_LPC47M CONFIG_SMSC_SIO1007 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_SH_GPIO_PFC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SH_GPIO_PFC CONFIG_TMU_TIMER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_RTC_DS1337 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RTC_DS1337 CONFIG_RTC_DS1337_NOOSC CONFIG_RTC_DS1338 CONFIG_RTC_DS1374 CONFIG_RTC_DS3231 CONFIG_RTC_MC13XXX CONFIG_RTC_MXS CONFIG_RTC_PT7C4338 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_PCA953X to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCA953X Cc: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_NAND_KMETER1 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NAND_ECC_BCH CONFIG_NAND_KIRKWOOD CONFIG_NAND_KMETER1 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_MXS_OCOTP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MXS_OCOTP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05arm: Remove unused mx27 codeTom Rini
We no longer have any i.MX27 platforms, remove the remaining support code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05arm: lpc32xx: Remove unused hsuart driverTom Rini
This driver is not enabled in any config currently, remove it. Cc: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_IMX_VIDEO_SKIP et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_IMX_VIDEO_SKIP CONFIG_IMX_HDMI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_POWER_LTC3676 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_POWER_FSL CONFIG_POWER_FSL_MC13892 CONFIG_POWER_HI6553 CONFIG_POWER_LTC3676 CONFIG_POWER_PFUZE100 CONFIG_POWER_PFUZE3000 CONFIG_POWER_SPI CONFIG_POWER_TPS65090_EC CONFIG_POWER_TPS65218 CONFIG_POWER_TPS65910 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_HIKEY_GPIO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_HIKEY_GPIO CONFIG_TCA642X Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_FSL_IIM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_IIM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05power: pmic: Guard non-DM_PMIC drivers with a check for POWER_LEGACYTom Rini
As we have more legacy PMIC drivers to move to Kconfig, guard them all with POWER_LEGACY or SPL_POWER_LEGACY. Do the same kind of check for building the drivers too. This also means that we need to resort the list slightly in the Makefile. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05rtc: Remove unused driversTom Rini
These RTC drivers are currently unused and reference other unused CONFIG variables, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550 namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONSTom Rini
This symbol is specific to the PowerPC SPL implementation, so rename this to reflect that it's in SPL and used / tested there, so that we can then safely migrate it to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_SIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_SIZE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_PAGE_2K et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_2K CONFIG_SYS_NAND_PAGE_4K Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_NO_SUBPAGE_WRITE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_MAX_OOBFREE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_MAX_OOBFREE CONFIG_SYS_NAND_MAX_ECCPOS Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05mtd: nand: raw: atmel_nand: Use ATMEL_BASE_ECC directlyTom Rini
This is the only driver, and only one platform makes use of, setting CONFIG_SYS_NAND_ECC_BASE. Reference ATMEL_BASE_ECC directly in this case. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_HW_ECC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC_OOBFIRST Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NAND_DBW_8 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_DBW_8 CONFIG_SYS_NAND_DBW_16 Note that all instances of the code check for CONFIG_SYS_NAND_DBW_16 being defined, and then "else" to CONFIG_SYS_NAND_DBW_8 whereas all of the configs set CONFIG_SYS_NAND_DBW_8. So we introduce CONFIG_SYS_NAND_DBW_16 as an option. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Merge tag 'xilinx-for-v2023.01-rc3-v2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2023.01-rc3-v2 xilinx: - Fix MAC address selection for System Controller from FRU - Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol) versal: - Create u-boot.elf for mini spi configurations versal-net: - Enable MT35XU flash zynq: - Add missing timer to DT for mini configurations zynqmp: - Do not include psu_init to U-Boot by default - Do not enable IPI by default to mini U-Boot - Update Luca's fragment - Fix SPL_FS_LOAD_PAYLOAD_NAME usage spi: - gqspi: Fix tapdelay values - gqspi: Fix 64bit address support - cadence: Remove condition for calling enable linear mode - nor-core: Invert logic to reflect sst26 flash unlocked net: - Add PCS/PMA phy support
2022-12-05mtd: spi-nor-core: Invert logic to reflect sst26 flash unlockedAlgapally Santosh Sagar
flash_is_locked is changed to flash_is_unlocked with commit 513c6071ce73 ("mtd: spi: Convert is_locked callback to is_unlocked"). sst26_is_locked() is also changed to sst26_is_unlocked() but the logic remained same. Invert the logic for the flash lock/unlock to work properly. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20221122051833.13306-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05spi: cadence-qspi: Remove condition for calling enable linear modeAshok Reddy Soma
cadence_qspi_apb_enable_linear_mode() has a weak function defined, so no need to gaurd this under if (CONFIG_IS_ENABLED(ARCH_VERSAL)). In cadence_qspi_apb_write_execute(), enable linear mode is called twice by mistake, remove extra one. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221129114134.18909-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05spi: zynqmp_qspi: Add support for 64-bit read/writeVenkatesh Yadav Abbarapu
When we pass the 64-bit address to read/write, only lower 32-bit address is getting updated. Program the upper 32-bit address in the DMA destination memory address MSBs register, which can handle upto 44-bit destination address. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20221125104413.26140-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05spi: zynqmp_gqspi: Update tapdelay valueT Karthik Reddy
The driver was using an incorrect value for GQSPI_LPBK_DLY_ADJ_DLY_1 tapdelay for Versal for frequencies above 100MHz. Change it from 2 to 1 based on the recommended value in IP spec. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20221123090451.11409-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05net: xilinx_axi: check PCS/PMA PHY status in setup_phyAndy Chiu
Both PCS/PMA PHY and the external PHY need to have a valid link status in order to have Ethernet traffic. Check and wait this status at setup_phy() so that we could diagnose if there is a PHY issue. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Link: https://lore.kernel.org/r/20221101035800.912644-3-andy.chiu@sifive.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05net: xilinx_axi: add PCS/PMA PHYAndy Chiu
If we bridge an external PHY to Xilinx's PCS/PMA PHY and would like to get and set the real status of the PHY facing the external world. Then we should phy_connect() to the external PHY instead of the PCS/PMA one. Thus, we add a pcs-handle DT entry, which have been merged in Linux, and leave the configuration of it to the driver itself. Unlike Linux, where the PCS/PMA PHY is managed by phylink, managing the PCS/PMA PHY is only internal to the driver in U-Boot. The PCS/PMA PHY pressents only when the phy-mode is configured as SGMII or 1000Base-X, so it is always 1 Gbps and full-duplex and we may skip passing link information out. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Link: https://lore.kernel.org/r/20221101035800.912644-2-andy.chiu@sifive.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05i2c: nuvoton: renamed the NPCM i2c driverJim Liu
The Makefile name is npcm_i2c but the driver is npcm-i2c. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Heiko Schocher <hs@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 03:53:54 +0000