summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-12-23global: Remove undef CONFIG_... for unused valuesTom Rini
We have a number of places that undef CONFIG_... while we never reference CONFIG_... in the first place. Remove these lines. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23log: Remove some places where we redefine LOGLEVELTom Rini
We cannot redefine a CONFIG value per file in this manner. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23atmel_nand: Remove undef during SPL_BUILDTom Rini
We cannot disable features in SPL in this manner, remove the undef here. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23mtd: ubi: Finish moving configuration to KconfigTom Rini
We have some unused and undefined symbols to remove references to, so do that. Move the final things that we do set (or need to keep unset) to Kconfig instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23Convert CONFIG_SYS_FPGA_CHECK_BUSY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FPGA_CHECK_BUSY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZETom Rini
This is always defined to 16K, so we move this over to include/fsl_validate.h to start with. Next, we rename this from CONFIG_ to FSL_. Coalesce the various comments around this definition to be in fsl_validate.h as well to explain the usage. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22usb: Remove CONFIG_USBD_HSTom Rini
This define is not enabled by the only platform which currently enables the legacy option of CONFIG_USB_DEVICE. We can drop this code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22net: vsc9953: Remove this driverTom Rini
No platforms enable this driver as there's no T1040D4RDB nor T1040RDB support at this time. Remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22net: Remove more legacy functionsTom Rini
Remove some of the board and arch specific non-DM_ETH helper code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22sandbox: Finish migration to KconfigTom Rini
Stop using CONFIG_SANDBOX_ARCH and use CONFIG_SANDBOX instead. For the SPI related defines, set them directly in Kconfig. This now empties arch/sandbox/include/asm/config.h. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-22arm: ti814x: Remove remaining support codeTom Rini
When the ti814x_evm config was removed most, but not all, of the relevant support code was remove. Get rid of what was missed. Fixes: 50b532686849 ("ti814x: Remove platform") Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_MXC_NAND_HWECC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MXC_NAND_HWECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22ddr: fsl: Remove CONFIG_MEM_INIT_VALUETom Rini
The way all of the memory init code here works is that we pass 0xDEADBEEF around for the initial value (as it's a well known 'poison' value and so easily recognized in debuggers, etc). The only point of this CONFIG symbol was to pass in a different value for that purpose. Drop this symbol and cleanup the code slightly. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22malta: Rename CONFIG_MALTA to CONFIG_TARGET_MALTATom Rini
Fixup this last remnant of CONFIG_MALTA. Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_KSNET_NETCP_V1_0 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KSNET_NETCP_V1_0 CONFIG_KSNET_NETCP_V1_5 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22i2c: Remove CONFIG_I2C_MULTI_BUSTom Rini
This functionality is part of the legacy I2C subsystem and is currently unused anywhere. Remove the remaining references. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_POWER_PCA9450 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_POWER_PCA9450 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FSL_ESDHC_PIN_MUX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_ESDHC_PIN_MUX Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FLASH_SHOW_PROGRESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22fec_mxc: Remove CONFIG_FEC_FIXED_SPEED supportTom Rini
This option is only used on one platform currently. However, with PHYLIB enabled, which this platform also does, this option is not checked and the functional use case is handled. Remove this code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_DM9000_BYTE_SWAPPED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DM9000_DEBUG CONFIG_MXC_GPT_HCLK CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_HSMMC2_8BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_HSMMC2_8BIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21usb: Update USB_STORAGE dependenciesTom Rini
As it's no longer possible to have !DM_USB set, we can remove these dependencies. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-21Merge tag 'v2023.01-rc4' into nextTom Rini
Prepare v2023.01-rc4 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-19Merge tag 'u-boot-rockchip-20221219' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Only call binman when TPL available; - rk3128 DTS fix; - Fix GPT table corruption for rk3399 puma ; - Fix i2c for rk3399 Pinebookpro; - Enable UEFI capsule update for RockPi4;
2022-12-19phy: rockchip: handle clock without enable functionJohn Keeping
If a clock doesn't supply the enable hook, clk_enable() will return -ENOSYS. In this case the clock is always enabled so there is no error and the phy initialisation should continue. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: rk3128-cru: sync the clock dt-binding header from LinuxJohan Jonker
In order to update the DT for rk3128 sync the clock dt-binding header. This is the state as of v6.0 in Linux. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-18Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
This cleans up each board's defconfig, and fixes the serial console on some Olimex board. Also we lose another legacy config variable. The rest are minor cleanups, that actually shouldn't change anything in the build. Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano, and BananaPi M1.
2022-12-13pinctrl: sunxi: Add P2WI and RSB pinmuxesSamuel Holland
P2WI and RSB are used to communicate with a PMIC. Most SoCs have only one possible pinmux. F1C100s has two possibilities, with different mux values, so omit it until some board needs one of them. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-13Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"Tom Rini
With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator. This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2. Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Reported-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-12configs: remove support of MTDIDS_DEFAULT/MTDPARTS_DEFAULTPatrick Delaunay
Complete the migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT in Kconfig; this patch removes the support of MTDIDS_DEFAULT / MTDPARTS_DEFAULT in the configuration files (include/configs/*.h). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-12drivers: pci: pcie_dw_common: add upper-limit to iATUBen Dooks
The 4.6 spec added an upper 32bits to the ATU limit, and since this driver is already assuming the unrolled feature added in the 4.8 specification this really should be set. This is causing a bug with testing against the QEMU model as it defaults the viewports to fully open and not setting this causes the config viewport to become most of memory (obviously stopping the emulated system working correctly) Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
2022-12-12dm: pmic: ignore disabled node in pmic_bind_childrenPatrick Delaunay
Ignore the disabled children node in pmic_bind_children() so the disabled regulators in device tree are not registered. This patch is based on the dm_scan_fdt_node() code - only the activated nodes are bound - and it solves possible issue when a deactivated regulator is bound, error for duplicated regulator name for example. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-12phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supplyPatrick Delaunay
Use regulator_set_enable_if_allowed() api instead of regulator_set_enable() while disabling vbus supply. This way the driver doesn't see an error when it disable an always-on regulator for VBUS. This patch is needed for STM32MP157C-DK2 board when the regulator v3v3: buck4 used as the phy vbus supply in kernel device tree is always on with the next hack for low power use-case: &usbphyc_port0 { ... /* * Hack to keep hub active until all connected devices are suspended * otherwise the hub will be powered off as soon as the v3v3 is disabled * and it can disturb connected devices. */ connector { compatible = "usb-a-connector"; vbus-supply = <&v3v3>; }; }; Without this patch and the previous update in DT the command "usb stop" failed and the next command "usb start" cause a crash. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de>
2022-12-10mtd: nand: mxs_nand_spl: don't read useless pagesDario Binacchi
The patch prevents pages beyond the last from being unnecessarily read. This occurs when the last page to be read is not the last page of the last block. Before this change we would have read all the pages up to the end of the last block. Suggested-by: Michael Trimarchi <michael@amarulasolutions.com> Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221120095705.3019295-1-dario.binacchi@amarulasolutions.com
2022-12-10mtd: nand: drop EXPORT_SYMBOL_GPL for nanddev_erase()Dario Binacchi
This function is only used within this module, so it is no longer necessary to use EXPORT_SYMBOL_GPL(). This patch parallels the work done in the following patch: https://lore.kernel.org/linux-mtd/20221018170205.1733958-1-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221108090719.3631621-1-dario.binacchi@amarulasolutions.com
2022-12-10mtd: nand: make Samsung SLC NAND usable againMichael Trimarchi
Upstream linux commit 69fc01296c9281 commit a1286a1fc416 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") introduced a regression for Samsung SLC NAND chips. Prior to this commit chip->bits_per_cell was initialized by calling nand_get_bits_per_cell() before using nand_is_slc(). With the offending commit this call is skipped, leaving chip->bits_per_cell cleared to zero when the manufacturer specific '.detect' function calls nand_is_slc() which in turn interprets bits_per_cell != 1 as indication for an MLC chip. The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as MLC NAND with 4KiB page size rather than SLC with 2KiB page size. Add a call to nand_get_bits_per_cell() before calling the .detect hook function in nand_manufacturer_detect(), so that the nand_is_slc() calls in the manufacturer specific code will return correct results. Reported-by: Marcin Gołaś <marcingol30@gmail.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20221021060536.11747-1-michael@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Reduce .bss usageRoger Quadros
Allocate omap_ecclayout on the heap as we have limited .bss space on AM64 R5 SPL configuration. Reduces .bss usage by 2984 bytes. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-9-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: nand_spl_loaders: Fix cast type build warningRoger Quadros
Fixes the below build warning on 64-bit platforms. drivers/mtd/nand/raw/nand_spl_loaders.c:26:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dst = (void *)((int)dst - page_offset); Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-8-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Optimize NAND readsRoger Quadros
Rename omap_nand_read() to omap_nand_read_buf() to reflect actual behaviour. Use FIFO read address instead of raw read address for reads. The GPMC automatically converts 32-bit/16-bit reads to NAND device specific reads (8/16 bit). Use the largest possible read granularity size for more efficient reads. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-5-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platformsRoger Quadros
Pointer size cannot be assumed to be 32-bit, so use use uintptr_t instead of uint32_t. Fixes the below build warning on 64-bit builds. drivers/mtd/nand/raw/omap_gpmc.c:439:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] head = ((uint32_t) buf) % 4; Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-4-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Enable build for K2/K3 platformsRoger Quadros
The GPMC module is present on some K2 and K3 SoCs. Enable building GPMC NAND driver for K2/K3 platforms. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-3-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.hRoger Quadros
We want to get rid of <asm/arch/mem.h> so don't enforce it for new platforms. This also means GPMC_MAX CS doesn't have to be defined by platform code. Define it locally here for now. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-2-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-09board: ti: introduce the basic files needed to support the am62aBryan Brattlof
Introduce the bare minimum SD and UART support for the am62a sk. Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-09arm: mach-k3: am62a: introduce auto-generated SoC dataBryan Brattlof
Introduce the auto-generated clock tree and power domain data needed to attach the am62a into the power-domain and clock frameworks of uboot Signed-off-by: Bryan Brattlof <bb@ti.com>
2022-12-09soc: ti: k3-socinfo: add am62a SoC entryBryan Brattlof
Add identification support for TI's am62ax family of SoCs Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-09ram: k3-ddrss: add am62a controller supportBryan Brattlof
TI's am62a family of SoCs uses a new 32bit DDR controller that shares much of the same functionality with the existing am64 and j721e controllers. Select this controller by default when u-boot is build for the am62a Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-09ram: k3-ddrss: add auto-generated macros for am62a supportBryan Brattlof
The new 32bit DDR controller for TI's am62a family of SoCs shares much of the same functionality with the existing 16bit (am64) and 32bit (j721e) controllers, so this patch reorganizes the existing auto-generated macros for the 16bit and 32bit controllers to make room for the macros for the am62a's controller This patch consists mostly of header/macro renames and additions with a new Kconfig option (K3_AM62A_DDRSS) allowing us to select these new macros during compilation. Signed-off-by: Bryan Brattlof <bb@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 18:46:46 +0000