summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-19arm: mvebu: pci: Add me as co-maintainer and author of Marvell PCIe driversPali Rohár
There is no maintainer entry for pci-aardvark.c. Add entry for pci-aardvark.c and pci_mvebu.c with Pali and Stefan as maintainers. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19phy: marvell: a3700: Convert to official DT bindings in COMPHY driverPali Rohár
Convert A3720 common PHY driver to official DT bindings. This puts us closer to be able to synchronize A3720 device-trees with those from Linux. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Marcin Wojtas <mw@semihalf.com> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19fdt_support: Remove FDT_STATUS_FAIL_ERROR_CODEMarek Behún
Since no one uses this feature and I am not aware of any parsers of this in Linux, remove it. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Michael Walle <michael@walle.cc> Cc: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-19treewide: Use fdt_create_phandle() where appropriateMarek Behún
Replace fdt_alloc_phandle() with subsequent fdt_set_phandle() by fdt_create_phandle(). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
2021-12-19arm: mvebu: axp: ddr: Switch to using DM I2C APIStefan Roese
No functional change intended. This patch switches from the legacy I2C API to the DM I2C API, so that this code can be used with DM I2C enabled. Signed-off-by: Stefan Roese <sr@denx.de>
2021-12-19arm: mvebu: axp: Remove unreferenced ddr3_get_eprom_fabric() functionStefan Roese
This function is not referenced in mainline U-Boot. Let's remove now. Signed-off-by: Stefan Roese <sr@denx.de>
2021-12-17Merge tag 'u-boot-at91-2022.04-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.04 cycle: This feature set includes : support for the new QSPI hardware on sama7g5, small fixes on sam9x60 and sama7g5, some additions of commands and PIO controller on sam9x60/sam9x60ek.
2021-12-07spi: atmel-quadspi: Add support for SAMA7G5 QSPITudor Ambarus
sama7g5 QSPI has: 1/ One Octal Serial Peripheral Interfaces (QSPI0) Supporting Up to 200 MHz DDR. Octal, TwinQuad, Hyperflash and OctaFlash Protocols Supported 2/ One Quad Serial Peripheral Interfaces (QSPI1) Supporting Up to 90 MHz DDR/133 MHz SDR The QSPI controller of SAMA7G5 uses different clock domains, hence extra synchronization operations must be performed before accessing some registers. Differentiate between the versions of the IP using has_gclk. Differentiate between QSPI0 and QSPI1 with has_octal. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-12-05ide: Drop ATA_PORT_ADDRSimon Glass
This is not needed anymore. Drop it to simplify the code. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-05ide: Drop unused CONFIG optionsSimon Glass
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use ATA_PORT_ADDR() locally instead. Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also unused. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05Convert CONFIG_KEYBOARD to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_KEYBOARD Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05sandbox: Drop CONFIG_HOST_MAX_DEVICESSimon Glass
This can go in the related header file. Drop the CONFIG option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-02drivers: core: lists: fix for loop index typeAlexander Preißner
* fixes the bug in function bind_drivers_pass that for CONFIG_CC_OPTIMIZE_FOR_SIZE=n and no entries in the driver_info list, i.e. n_ents == 0, the processor steps into the first loop iteration despite the loop condition being false. * the Xilinx Zynq-7000 device would eventually hang due to an attempted access to an invalid memory address * the bug is fixed by changing the type of idx from uint to int Board: zynq-zybo Target: ARM Compiler: arm-none-eabi-gcc 9.2.1 Signed-off-by: Alexander Preissner <fpga-garage@preissner-muc.de> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2021-12-02Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net ↵Tom Rini
into next - New Broadcom NetXtreme driver - Support for socat for netconsole - Felix switch soft reset fix
2021-12-02net: brcm: netXtreme driverBharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom iproc platforms. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
2021-12-02driver: net: Makefile: order file alphabeticallyRamon Fried
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2021-12-02drivers: net: Soft reset felix switch coreRadu Bulie
It turns out that in custom designs if the system is reset multiple times in conjunction with a slight increase in external temperature, the felix switch starts to behave in a strange way: packets are no longer received on the ENECT interface connected to the L2switch internal port (the TX side of internal port stops working or the packets do not reach there. It is not very clear where the packets remain blocked. None of the counters points to a disruption in the L2switch) The issue is not reproducible on NXP reference designs. It was observed that by adding the switch core reset, the problem goes aways, even if intensive testing in temperature chambers is applied. The current patch performs soft reset on the switch core to ensure proper operation of the L2switch. Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-12-01dm: add debug message when failed to select the default pinctrlPatrick Delaunay
Add a message on probe in driver model core when the default pinctrl selection failed. This message is displayed only when the pinctrl API is implemented, i.e. when result is not ENOSYS. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-01Convert CONFIG_SYS_BR0_PRELIM et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BR0_PRELIM CONFIG_SYS_OR1_PRELIM CONFIG_SYS_BR1_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR2_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR3_PRELIM CONFIG_SYS_OR3_PRELIM CONFIG_SYS_BR4_PRELIM CONFIG_SYS_OR4_PRELIM CONFIG_SYS_BR5_PRELIM CONFIG_SYS_OR5_PRELIM CONFIG_SYS_BR6_PRELIM CONFIG_SYS_OR6_PRELIM CONFIG_SYS_BR7_PRELIM CONFIG_SYS_OR7_PRELIM This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms that can set these values do so. Add the relevant SYS_BRx_PRELIM_BOOL to platforms that had not been previously migrated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-30ram: stm32mp1: remove __maybe_unused on stm32mp1_ddr_setupPatrick Delaunay
Since the commit f42045b2e750 ("stm32mp15: replace CONFIG_TFABOOT when it is possible") the function stm32mp1_ddr_setup is always called so the __maybe_unused can be removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30ram: stm32mp1: compute DDR size from DDRCTL registersPatrick Delaunay
Compute the DDR size from DDR controller register (mstr and addrmap) in U-Boot proper as the DDR information are useful only for SPL but not for U-Boot proper, for example with TFABOOT. This patch simplify U-Boot DT when several DDR size are supported and support of next SOC in STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30video: stm32: stm32_ltdc: align framebuffer on 2MBPatrick Delaunay
Align the framebuffer size on MMU_SECTION_SIZE in kernel, = max 2MB for LPAE for armV7, to avoid issue with the simple frame buffer activation, when U-Boot add a reserved memory in the kernel device tree to preserve the splash screen until Linux driver initialization. See Linux documentation for details: Documentation/devicetree/bindings/display/simple-framebuffer.yaml Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30video: Add video_is_active functionPatrick Delaunay
Add the helper function video_is_active() to test if one video device is active. This function can be used in board code to execute operation only when the display is probed / really used. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30stm32mp1: ram: remove tuning supportPatrick Delaunay
Remove the DDR interactive command tuning, as the support of a predefined DDR PHY tuning is removed for STM32MP1 driver in SPL and in TF-A and the result of this tuning will be never used. Moreover this SW tuning procedure can failed on some hardware configuration (to many BIST errors and no convergence); it will be no more supported in the next delivery of the DDR utilities included in the CubeMX tool of STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30stm32mp1: ram: remove the support of calibration resultPatrick Delaunay
The support of a predefined DDR PHY tuning result is removed for STM32MP1 driver because it is not needed at the supported frequency when built-in calibration is executed. The calibration parameters were provided in the device tree by the optional node "st,phy-cal", activated in ddr helper file by the compilation flag DDR_PHY_CAL_SKIP and filled with values generated by the CubeMX DDR utilities. This patch - updates the binding file to remove "st,phy-cal" support - updates the device trees and remove the associated defines - simplifies the STM32MP1 DDR driver and remove the support of the optional parameter "st,phy-cal" After this patch, the built-in calibration is always executed and the calibration registers are moved in the phy dynamic part; that allows manual tests. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30stm32mp1: ram: add read valid training supportPatrick Delaunay
Add the read data eye training = training for optimal read valid placement (RVTRN) when the built-in calibration is executed for LPDDR2 and LPDDR3. This training is supported on the PUBL integrated in the STM32MP15x DDR subsystem and it is not required for DDR3. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30mmc: stm32_sdmmc2: Add support for probing bus voltage level translatorMarek Vasut
Add support for testing whether bus voltage level translator is present and operational. This is useful on systems where the bus voltage level translator is optional, as the translator can be auto-detected by the driver and the feedback clock functionality can be disabled if it is not present. The translator test sets CMD high to avoid interfering with a card, and then verifies whether signal set on CK is detected on CKIN. If the signal is detected, translator is present, otherwise the CKIN feedback clock are disabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Yann Gautier <yann.gautier@foss.st.com>
2021-11-30pinctrl: stmfx: define LOG_CATEGORYPatrick Delaunay
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-29Merge tag 'v2022.01-rc3' into nextTom Rini
Prepare v2022.01-rc3 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-28dm: core: Add a way to count the devices in a uclassSimon Glass
Add a function that returns the number of devices in a uclass. This can be helpful in sizing an array that needs to hold a list of them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28dm: core: Allow finding children / uclasses by partial nameSimon Glass
In some cases it is useful to search just by a partial name, such as when looking for a sibling device that has a common name substring. Add helper functions to handle these requirements. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28dm: core: Add a way to obtain a string listSimon Glass
At present we support reading a string list a string at a time. Apart from being inefficient, this makes it impossible to separate reading of the devicetree into the of_to_plat() method where it belongs, since any code which needs access to the string must read it from the devicetree. Add a function which returns the string property as an array of pointers to the strings, which is easily used by clients. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28dm: core: Fix up string-function documentationSimon Glass
The details for of_property_read_string_helper() and ofnode_read_string_index() are a little inaccurate. Fix up the comments to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28dm: core: Fix handling of uclass pre_unbind methodSimon Glass
This method is currently called after the platform data has been freed. But the pre_unbind() method may wish to access this, e.g. to free some data structures stored there. Split the unbinding of devices into two pieces, as is done with removal. This corrects the problem. Also tidy a code-style issue in device_remove() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28mmc: Allow for children other than the block deviceSimon Glass
At present the MMC uclass assumes that the only child it can have is a block device. Update this so we can add a bootmethod too. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28sandbox: mmc: Support a backing fileSimon Glass
Provide a way for sandbox MMC to present data from a backing file. This allows a filesystem to be created on the host and easily served via an emulated mmc device. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-23firmware: scmi: Add OP-TEE transportEtienne Carriere
This change implements an SCMI transport for agent interfacing the OP-TEE SCMI service. OP-TEE provides an SCMI PTA (Pseudo-TA) for non-secure world to send SCMI messages over an identified channel. The driver implemented here uses a SMT shared memory for passing messages between client and server. The implementation opens and releases channel resources for each passed SCMI message so that resources allocated (sessions) or registered (shared memory areas) in OP-TEE firmware are released for example before relocation as the driver will likely allocate/register them back when probed after relocation. The integration of the driver using dedicated config switch CONFIG_SCMI_AGENT_OPTEE is designed on the model posted to the U-Boot ML by Patrick Delaunay [1]. Link: [1] https://lore.kernel.org/all/20211028191222.v3.4.Ib2e58ee67f4d023823d8b5404332dc4d7e847277@changeid/ Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23tee: optee: remove unused duplicated login Id macrosEtienne Carriere
Remove unused OPTEE_MSG_LOGIN_* ID macros as suitable TEE_LOGIN_* ID macros are already defined tee.h. Cc: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-11-23firmware: scmi: smccc transport: simplify probe sequenceEtienne Carriere
Minor simplification in scmi_smccc_probe() exit sequence. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: smccc transport: use plat data, not priv dataEtienne Carriere
Change SCMI smccc transport drivers to use platform data rather than private data for channel reference since it only stores platform data retrieved from the DT. Consequently the probe handler is replaced with a of_to_plat handler. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: mailbox transport: use plat data, not priv dataEtienne Carriere
Change SCMI mailbox transport drivers to use platform data rather than private data for channel reference since it only stores platform data retrieved from the DT. Consequently the probe handler is replaced with a of_to_plat handler. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: mailbox transport: fix probe failure implementationEtienne Carriere
Correct scmi mailbox probe function that can't free the scmi channel instance since its auto-allocated by the device model framework. Cc: Simon Glass <sjg@chromium.org> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-23firmware: scmi: add configs to select the supported agentsPatrick Delaunay
Add two configs CONFIG_SCMI_AGENT_MAILBOX and CONFIG_SCMI_AGENT_SMCCC to select the supported agents as all the agents are not supported. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-11-23power: regulator: scmi: define LOG_CATEGORYPatrick Delaunay
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-11-23clk: scmi: define LOG_CATEGORYPatrick Delaunay
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-11-23reset: scmi: define LOG_CATEGORYPatrick Delaunay
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-11-23net: phy: realtek: Add tx/rx delay config for 8211eSamuel Holland
Some boards need to change the tx/rx delay config in order for gigabit Ethernet to work. In Linux commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), Realtek documented the bits for overriding the delays from the hardware straps. Copy the logic from linux, so the delay config is set from the PHY's interface type (the phy-mode property in the device tree). This removes the need for a one-off workaround for the Pine A64+ board. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-23drivers: net: add Aspeed MDIO driverDylan Hung
Add a driver for the MDIO interface for Aspeed AST2600 SOC. The driver only supports clause 22 for now. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2021-11-23net: tsec: Make redundant_init() staticBin Meng
redundant_init() is only called in the tsec driver. Make it static. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-23net: fec_mxc: Declare 'promisc' as boolBin Meng
priv->promisc is used as the parameter of the set_promisc() call which accepts a bool type instead of char. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 00:30:52 +0000