| Age | Commit message (Collapse) | Author |
|---|
|
Enable serial support for Exynos850 SoC by adding the corresponding
compatible string. No additional changes needed, the driver works as is
on Exynos850. Related USI and PMU configuration is enabled in separate
drivers. The only other dependencies are clock and pinctrl drivers,
which are already enabled too.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Add pinctrl support for Exynos850 SoC. It was mostly extracted from
corresponding Linux kernel code [1]. Power down modes and external
interrupt data were removed while converting the code for U-Boot, but
everything else was kept almost unchanged.
[1] drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Heavily influenced by its Linux kernel counterpart. It's implemented on
top of recently added Samsung CCF clock framework API. For now only UART
leaf clocks are implemented, along with all preceding clocks in CMU_TOP
and CMU_PERI. The UART baud clock is required in the serial driver, to
get its rate for the consequent baud rate calculation.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Heavily based on Linux kernel Samsung clock framework, with some changes
to accommodate the differences in U-Boot CCF implementation. It's also
quite minimal as compared to the Linux version.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
PLL utilities code is only used by clk-exynos7420 driver at the moment.
Move it into clk-exynos7420 to make clk-pll.c file available for CCF PLL
clocks implementation, which is coming in the next patches.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Add basic Power Management Unit (PMU) driver for Exynos SoCs. For now
it's only capable of changing UART path in PMU, which is needed for
E850-96 board. The driver's structure resembles the exynos-pmu driver
from Linux kernel, and although it's very basic and slim at the moment,
it can be easily extended in future if the need arises.
UCLASS_NOP is used, as there are no benefits in using more elaborate
classes like UCLASS_MISC in this case. The DM_FLAG_PROBE_AFTER_BIND flag
is added in bind function, as the probe function must be always called
for this driver.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
USIv2 IP-core is found on modern ARM64 Exynos SoCs (like Exynos850) and
provides selectable serial protocol (one of: UART, SPI, I2C). USIv2
registers usually reside in the same register map as a particular
underlying protocol it implements, but have some particular offset. E.g.
on Exynos850 the USI_UART has 0x13820000 base address, where UART
registers have 0x00..0x40 offsets, and USI registers have 0xc0..0xdc
offsets. Desired protocol can be chosen via SW_CONF register from System
Register block of the same domain as USI.
Before starting to use a particular protocol, USIv2 must be configured
properly:
1. Select protocol to be used via System Register
2. Clear "reset" flag in USI_CON
3. Configure HWACG behavior (e.g. for UART Rx the HWACG must be
disabled, so that the IP clock is not gated automatically); this is
done using USI_OPTION register
4. Keep both USI clocks (PCLK and IPCLK) running during USI registers
modification
This driver implements the above behavior. Of course, USIv2 driver
should be probed before UART/I2C/SPI drivers. It can be achieved by
embedding UART/I2C/SPI nodes inside of the USI node (in Device Tree);
driver then walks underlying nodes and instantiates those. Driver also
handles USI configuration on PM resume, as register contents can be lost
during CPU suspend.
This driver is designed with different USI versions in mind. So it
should be relatively easy to add new USI revisions to it later.
Driver's code was copied over from Linux kernel [1] and adapted
correspondingly for U-Boot API. UCLASS_MISC is used, and although no
misc operations are implemented, it makes it easier to probe the driver
this way (as compared to UCLASS_NOP) and keep the code compact.
[1] drivers/soc/samsung/exynos-usi.c
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
MEMCLKMGR_EXTCNTRST_C0CNTRST register defined as BIT[0] in documentation
but it is wrongly defined as BIT[7] in u-boot code. This register is used
to hold associated pingpong counter in reset
while PLL and 5:1 mux configuration is changed.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
|
|
Roger Quadros <rogerq@kernel.org> says:
Hi,
This series fixes USB operation on k3-j721e based boards.
|
|
The phys property is optional so don't complain
if it doesn't exist in device tree.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm
Add CMDLINE dependecy for CMD_STM32KEY
STM32MP1:
---------
Set stdio to serial on DH STM32MP15xx DHSOM
Fix reset for usart1 in scmi configuration
STM32MP2:
---------
Add BSEC and OTP support for STM32MP25
Fix CONFIG_STM32MP25X flag usage
|
|
- A number of OS boot related cleanups, a number of TI platform
fixes/cleanups, SMBIOS fixes, tweak get_maintainers.pl to report me
for more places, fix the "clean the build" pytest and add a bootstage
pytest, fix PKCS11 URI being omitted in some valid cases, make an iommu
problem easier to debug on new platforms, nvme and pci improvements,
refactor image-host code a bit, fix a typo in env setting, add a missing
dependency for CMD_LICENSE, and correct how we call getchar() in some
places.
|
|
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
|
|
Complete the transition away from xhci-dwc3 and dwc3-of-simple drivers
and change to use the dwc3-generic driver on remaining RK3328 and RK3399
boards.
MISC, USB_DWC3 and USB_DWC3_GENERIC is enabled on boards that used to
enable USB_XHCI_DWC3. USB_XHCI_DWC3 is dropped from updated boards along
with the default y of USB_XHCI_DWC3_OF_SIMPLE.
There is no intended change in functionality with this changes, USB 3.0
is expected to continue same as before this change.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
A busy controller shouldn't be game-over for all controllers,
so keep trying on hitting -EBUSY.
This change brings the actual behavior of the routine in line
with what the descriptions says.
Fixes: 982388eaa991 ("nvme: Add NVM Express driver support")
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Moritz Fischer <moritzf@google.com>
|
|
Return -EBUSY if controller is found busy rather than -ENOMEM
and update the error message accordingly.
Fixes: 982388eaa991 ("nvme: Add NVM Express driver support")
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Moritz Fischer <moritzf@google.com>
|
|
This enables 64b BARs if CONFIG_SYS_PCI_64BIT is enabled.
Reviewed-by: Philip Oberfichtner <pro@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Moritz Fischer <moritzf@google.com>
|
|
When attempting to probe a device which has an associated IOMMU, if the
IOMMU device can't be found (no driver, disabled driver, driver failed
to probe, etc) then we currently fail to probe the device with no
discernable error.
If we fail to hook the device up to its IOMMU, we should make sure that
the user knows about it. Write some better error messages for
dev_iommu_enable() to facilitate this.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Documentation:
* add generated index to table of contents
* create index entries for commands
* update Python packages used to build the documentation
* fix typos in dfu documentation
UEFI:
* split unrelated code from efi_bootmgr.c
* rename CONFIG_BOOTEFI_BOOTMGR to CONFIG_EFI_BOOTMGR
* net: tftp: remove explicit EFI configuration dependency
* fs: remove explicit EFI configuration dependency
Other:
* Add Goldfish RTC driver and make it available on RISC-V QEMU
|
|
The Goldfish RTC is a virtual device which may be supplied by QEMU.
It is enabled by default on QEMU's RISC-V virt machine.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Add reset controller driver for Nuvoton BMCs.
The npcm reset driver not only supports reset each module reset
but setting initial value of reset Control Registers.
And The driver support each module reset.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
|
|
QEMU provides SMBIOS tables with detailed information. We should not try to
replicate them in U-Boot.
If we want to inform about U-Boot, we can add a Firmware Inventory
Information (type 45) table in future.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm architecture changes:
* Move clock and pinctrl drivers out of mach-snapdragon
* Various clock driver improvements
* Convert PMIC power/reset key driver to use the button API
* Preparetory work for migrating to upstream DT
|
|
Linux DTs stuff a value indicating if the USID is a USID or a GSID in the
reg property, the Linux SPMI driver then reads the two address cells
separately. U-boot's dev_read_addr() doesn't know how to handle this, so
use ofnode_read_u32_index() to get just the USID.
The Qcom pmic driver doesn't have support for GSID handling, so just
ignore the second value for now.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The core and chnl register ranges were swapped on SDM845. Fix it, and
fetch the register ranges by name instead of by index.
Drop the cosmetic "version" variable and clean up the debug logging.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This property is not part of the dt bindings and all boards use the new
gpio-ranges property instead. Drop support for this.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Upstream uses the gpio-ranges property to define the number of GPIOs,
support for parsing this when gpio-count is unspecified
Additionally, drop the bank-name property as it isn't used in upstream,
and we can just hardcode the bank name instead.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Remove the (now unused) GPIO driver for the power and resin buttons on
the PMIC.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Qualcomm PMICs include a "pon" function which handles two buttons, the
power button and "resin" button (usually volume down). Introduce a new
driver following upstream Linux DT to enable these and map them to Enter
and Down respectively to enable use in boot menus.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
priv->pid is uint32_t, but dev_read_addr() returns a uint64_t on arm64,
with the upper bits being used for error codes. Do error checking before
downcasting to u32 to prevent errors being silently ignored.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
devm_clk_get() returns an ERR_PTR on failure, not null. Fix the check to
avoid the board crashing when the clock isn't available.
Additionally, add the missing error handling for this function.
Fixes: 324df15a292e ("serial: qcom: add support for GENI serial driver")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
commit 1b15483deb3f ("misc: add Qualcomm GENI SE QUP device driver")
introduced support for platform-specific oversampling values, necessary
to configure the UART clocks on all platforms at runtime. However it
relies in probing a parent device. Despite the DM_FLAG_PRE_RELOC flag,
this is not done consistently during boot.
Instead, take another approach by relying on ofnode_ helpers to read the
serial engine base address and do the read directly. This fixes early
UART on boards with a non-default oversampling rate.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Replaces the uses of "unsigned" with "unsigned int".
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The pinctrl and GPIO drivers are currently heavily incompatible with
upstream. Most Qualcomm pinctrl blocks feature "tiles" of pins, each at
it's own address. Introduce support for these by allowing the soc driver
to specify per-pin register offsets similarly to the Linux driver.
Adjust the GPIO driver to handle these too, and finally enable support
for all pins with the same numbering as used in Linux.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Drop the duplicated pinctrl-snapdragon driver from mach-ipq40xx and add
it to drivers/pinctrl/qcom.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Move the Qualcomm pinctrl drivers out of mach-snapdragon and over to the
rest of the pinctrl drivers, adjust the drivers so that support for each
platform can be enabled/disabled individually and introduce platform
specific configuration options.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The RCG divider field takes a value of (2*h - 1) where h is the divisor.
This allows fractional dividers to be supported by calculating them at
compile time using a macro.
However, the clk_rcg_set_rate_mnd() function was also performing the
calculation. Clean this all up and consistently use the F() macro to
calculate these at compile time and properly support fractional divisors.
Additionally, improve clk_bcr_update() to timeout with a warning rather
than hanging the board, and make the freq_tbl struct and helpers common
so that they can be reused by future platforms.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This property is needed on some platforms to ensure that only the
relevant bits are set in the M/N/D registers.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Currently, it isn't possible to build clock drivers for more than one
platform due to how the msm_enable() and msm_set_rate() callbacks are
implemented.
Extend qcom_clk_data to include function pointers for these and convert
all platforms to use them.
Previously, clock drivers relied on include/configs/<board.h> to include the
board specific sysmap header, however as most of the header contents are clock
driver related, import the contents directly into each clock driver and
remove the header. The only exception here is the dragonboard820c board file
which includes some pinctrl macros, those are also inlined.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
[caleb: remove additional sysmap-sdm845.h mention]
|
|
Many gate clocks can be enabled with a single register write, add support
for defining these simple gate clocks and add the ones found on SDM845.
While we're here, inline clk_init_uart() into msm_set_rate().
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Qualcomm's clock controller blocks actually do much more than it
says on the tin.. They provide clocks, resets and power domains.
Currently, U-Boot requires one to spawn 2 separate devices for
controlling clocks and resets, both spanning the same register space.
Refactor the code to make it work with just a single DT node, making
it compatible with upstream Linux bindings and dropping the dedicated
reset driver in favour of including it in the clock driver.
Heavily inspired by Renesas code for a similar hw block.
[caleb: moved drivers to clk/qcom, added reset driver and adjusted bind
logic. Imported qcom,gcc-ipq4019.h from Linux]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This driver is just a stub, but it's necessary to support the upcoming
reset driver changes.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Clock drivers don't belong here, move them to the right place and
declutter mach-snapdragon a bit.
To de-couple these drivers from specific "target" platforms, add
additional config options to enable each clock driver gated behind a
common CLK_QCOM option and enable them by default for the respective
targets. This will make future work easier as we move towards a generic
Qualcomm target.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Set NAND chip ofnode and device so OF based partition parsing
can work.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://www.mail-archive.com/u-boot@lists.denx.de/msg499178.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
For DM case we can get the NAND chip's IO address from DT
so we don't need to rely on CFG_SYS_NAND_BASE.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://www.mail-archive.com/u-boot@lists.denx.de/msg499177.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
sys_proto.h no longer exists for K3 platform so drop it.
Include sizes.h to so SZ_16M is visible.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://www.mail-archive.com/u-boot@lists.denx.de/msg499176.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
The macro ELM_BASE is defined in mach/hardware.h and is
not visible at the omap_elm.h header file. Avoid using it
in omap_elm.h.
Reported-by: Hong Guan <hguan@ti.com>
Fixes: 7363cf0581a3 ("mtd: rawnand: omap_elm: u-boot driver model support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/all/20231211114600.4414-3-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
AM335x uses a special driver "am335x_spl_bch.c" as SPL
NAND loader. This driver expects 1 sector at a time ECC
and doesn't work well with multi-sector ECC that was implemented in
commit 04fcd2587321 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
Additionally, the omap_elm driver does not support multi sector ECC and will
need more work and tests to get multi sector working correctly on all
platforms.
Switch back to 1 sector at a time read/ECC.
Fixes: 04fcd2587321 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Enrico Leto <enrico.leto@siemens.com>
Tested-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20231211114600.4414-2-rogerq@kernel.org/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
