summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-06-19nvme: pci: Enable for SPLMayuresh Chitale
Enable NVME and PCI NVMe drivers for SPL builds. Also enable PCI_PNP for SPL which is required to auto configure the PCIe devices. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
2023-06-19spl: blk: Support loading images from fsMayuresh Chitale
Add a generic API to support loading of SPL payload from any supported filesystem on a given partition of a block device. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
2023-06-19nvmxip: move header to includeRui Miguel Silva
Move header to include to allow external code to get the internal bdev structures to access block device operations. as at it, just add the UCLASS_NVMXIP string so we get the correct output in partitions listing. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-16serial: stm32: BRR must be set only when usart is disablePatrice Chotard
To avoid spurious chars, BRR register must only be written when USART is disabled. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16serial: stm32: Wait TC bit before performing initializationPatrice Chotard
In case there is still chars from previous bootstage to transmit, wait for TC (Transmission Complete) bit to be set which ensure that the last data written in the USART_TDR has been transmitted out of the shift register. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16pmic: stpmic1: support new prefix node name for regulatorPatrick Delaunay
The '_' character is discouraged in the node name, this patch adds the new prefix of regulator subnode, with the '-' character, in STM32MP1 driver to support the new naming rule in Linux kernel device trees. It is a preliminary patch before Linux device tree synchronization for STMicroelectronics boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16dfu: mtd: remove direct call of mtdparts_init functionPatrick Delaunay
With MTD support in driver model, the direct call of mtdparts_init should be avoided and replaced by mtd_probe_devices. With the modificaton when MTDIDS/MTDPARTS are empty the OF fallback with partition describe in device tree is correctly performed, introduced by commit dc339bf784f0 ("mtd: add support for parsing partitions defined in OF"). With this patch the dependency with CONFIG_CMD_MTDPARTS is removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-15net: fsl-mc: sync remaining MC commandsIoana Ciornei
This patch targets the last remaining commands left to sync to their latest form - mainly the mc_get_version() API. Besides this, remove any macro which is now of no help. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPIO MC APIsIoana Ciornei
Sync the Data Path IO APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPSPARSER MC APIsIoana Ciornei
Sync the Data Path Soft Parser APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPNI MC APIsIoana Ciornei
Sync the Data Path Network Interface APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPRC MC APIsIoana Ciornei
Sync the Data Resource Container APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPMAC MC APIsIoana Ciornei
Sync the Data Path MAC APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPBP MC APIsIoana Ciornei
Sync the Data Path Buffer Pool APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: remove unused MC APIsIoana Ciornei
There are multiple MC APIs which were added years ago but they are not used at all in the u-boot source code. Remove all these APIs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14net: ldpaa_eth: export DPNI and DPMAC counters through 'net stats'Ioana Ciornei
Export the already existing DPNI and DPMAC counters through the newly added callbacks. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14net: ldpaa_eth: extend debug capabilities with DPMAC statisticsIoana Ciornei
The ldpaa_eth driver already had a DPMAC statistics dump, this patch extends the list of stats and adds a bit more structure to the code. For a bit more context, the DPAA2 u-boot software architecture uses a default network interface object - a DPNI - which, at runtime, will get connected to the currently used DPMAC object. Each time the .stop() eth callback is called, the DPMAC is destroyed thus any previous counters will get lost. As a preparation for the next patches, we add a software kept set of DPMAC counters which will get updated before each destroy operation takes place. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14net: ldpaa_eth: extend debug capabilities with DPNI statisticsIoana Ciornei
The ldpaa_eth driver already had a DPNI statistics dump, this patch extends the list of stats and adds a bit more structure to the code. For a bit more context, the DPAA2 u-boot software architecture uses a default network interface object - a DPNI - which, at runtime, will get connected to the currently used DPMAC object. Each time the .stop() eth callback is called, the DPNI is reset to its original state, including its counters. As a preparation for the next patches, we add a software kept set of DPNI counters which will get updated before each reset operation takes place. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14net: ldpaa_eth: transform dpni_statistics from a struct to a unionIoana Ciornei
In order to simplify code, dpni_statistics can be written as a union. Using the raw accessors we can just loop through all the statistics from a page without trying to access each an every one independently. Make this change to a union. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-12Merge tag 'xilinx-for-v2023.10-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2023.10-rc1 global: - Use proper U-Boot project name Fix sparse warnings in zynqmp-clk, zynqmp handoff, board cmd: - Cover incorrect 0 length entries Versal NET: - Add bootmode logic - Support SPP production version - Add loadpdi command ZynqMP: - Clear pmufw node command ID handling - Change power domain behavior around zynqmp_pmufw_node() - Fix zynqmp cmd return values and pmufw command - Fix R5 tcm init and modes mmc: - Sync Versal NET emmc DT binding pcie: - Add support for ZynqMP PCIe root port video: - Add support for ZynqMP DP tools: - Fix debug message in relocate-rela
2023-06-12Merge tag v2023.07-rc4 into nextTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-12PCI: zynqmp: Add ZynqMP NWL PCIe root port driverStefan Roese
This patch adds the PCIe controller driver for the Xilinx / AMD ZynqMP NWL PCIe Bridge as root port. The driver source is partly copied from the Linux PCI driver and modified to enable usage in U-Boot (e.g. simplified and interrupt support removed). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Pali Rohár <pali@kernel.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20230525094918.111949-1-sr@denx.de Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12firmware: zynqmp: Extend debug message to show parametersMichal Simek
Also print more arguments not just ID when xilinx_pm_request is called. It helps to decode what firmware is asked to do. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/54928d061da75bd972a3b6a1219204e730b49225.1685619271.git.michal.simek@amd.com
2023-06-12video: zynqmp: Enable 1024x768 resolutionMichal Simek
Add support for 1024x768 60p resolution and set it up this resolution by default. This resolution is still able to use only one GT line. But for example 800x600 60p has some issues with settings. That's why extend this table by tested resolutions. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/957e1e85a05744326ec2606dadc1af6e69976f37.1684312924.git.michal.simek@amd.com
2023-06-12video: zynqmp: Driver for Xilinx ZynqMP DisplayPort SubsystemVenkatesh Yadav Abbarapu
The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort Subsystem. It includes a buffer manager, blender, an audio mixer and a DisplayPort source controller (transmitter). The DisplayPort controller can source data from memory (non-live input) or the stream (live input). The DisplayPort controller is responsible for managing the link and physical layer functionality. The controller packs audio/video data into transfer units and sends them over the main link. The link rate and lane counts can be selected based on the application bandwidth requirements. The DisplayPort pipeline consists of the DisplayPort direct memory access (DMA) for fetching data from memory. The DisplayPort DMA controller (DPDMA) supports up to six input channels as non-live input. This driver supports the DisplayPort Subsystem and implements 1)640x480 resolution 2)RGBA8888 32bpp format 3)DPDMA channel 3 for Graphics 4)Non-live input 5)Fixed 5.4G link rate 6)Tested on ZCU102 board There will be additional work to configure GT lines based on DT, higher resolutions, support for more compressed video formats, spliting code to more files, add support for EDID, audio support, using clock framework for all clocks and in general code clean up. Codevelop-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5c1567b63d0280dacc7efba2998857c399c25358.1684312924.git.michal.simek@amd.com
2023-06-12video: move zynqmp files to subdirectoryVenkatesh Yadav Abbarapu
Place zynqmp files and headers in custom driver subdirectory. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9aae6d217f0673c310818e3de38bb239c79c060c.1684312924.git.michal.simek@amd.com
2023-06-12video: bmp: Support rgba8888 pixel formatMichal Simek
Adding the support for RGBA8888 format for BMP decoding. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/322910eb24692f6140a001796501270eb1c53d9a.1684312924.git.michal.simek@amd.com
2023-06-12video: Add support for RGBA8888 formatMichal Simek
Add support for RGBA8888 32bpp format where pixels are picked in 32-bit integers, where the colors are stored in memory such that R is at lowest address, G after that, B after that, and A last. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aa1de54b7d4ff46df6858f76d52634e0c5c71a4a.1684312924.git.michal.simek@amd.com
2023-06-12firmware: zynqmp: Store driver data in data sectionStefan Herbrechtsmeier
Store the driver data in the data section to make the data usable before relocation. Additionally mark the driver data static to restrict the access. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Link: https://lore.kernel.org/r/20230523124215.30915-5-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12firmware: zynqmp: Move permission to change config object messageStefan Herbrechtsmeier
Move the permission to change a config object message from zynqmp_pmufw_load_config_object function to zynqmp_pmufw_node function to simplify the code and check the permission only if required. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Link: https://lore.kernel.org/r/20230523124215.30915-4-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12power: zynqmp: Mask node already configured errorStefan Herbrechtsmeier
Do not return an error (ENODEV) from the request function if the node is already configured. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Link: https://lore.kernel.org/r/20230523124215.30915-3-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12firmware: zynqmp: Remove redundant child device bindStefan Herbrechtsmeier
Remove the redundant child device bind from the driver bind function and rely on the post_bind of the class which calls the same function. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Link: https://lore.kernel.org/r/20230523124215.30915-2-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12firmware: zynqmp: Remove extraordinary return valueStefan Herbrechtsmeier
Return a common -EACCES error value instead of a positive private error value XST_PM_NO_ACCESS (2002) in zynqmp_pmufw_load_config_object function if the config object is not loadable to simplify the error checking. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Link: https://lore.kernel.org/r/20230523124215.30915-1-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12global: Use proper project name U-BootMichal Simek
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-06-12mmc: zynq: Sync with upstream DT bindingMichal Simek
Versal NET is not in production yet that's why no need to keep backward compatible with previously used compatible string. Link: https://lore.kernel.org/r/20230403102551.3763054-2-sai.krishna.potthuri@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0d355f4fbaf6a3521d41ee43f17dde2515ff7ab7.1684311766.git.michal.simek@amd.com
2023-06-12clk: zynqmp: Add fallthrough statement in the switch caseAlgapally Santosh Sagar
Add fallthrough statement in switch case to fix the sparse warning. In function 'zynqmp_clk_get_rate': warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-2-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-10Merge branch 'next_net/phy_connect_dev' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh into next
2023-06-10net: sh_eth: Fix RX error handlingValentine Barshak
In case RX error occurs, and the RD_RFE bit is set, the descriptor is never returned back to the queue. Make sh_eth_recv_start return zero length in this case so that the descriptor can be released and pushed back to the list. Also return the more appropriate -EAGAIN instead of -EINVAL if the descriptor is not ready yet. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: sh_eth: Workaround cache issuesValentine Barshak
U-Boot writes to RX packets when constructing replies. This can cause stale cached data to be written to RX buffer while we're receiving a packet. This causes RX packet corruption because we invalidate the cache right before processing the packet. Invalidate packet buffer cache when preparing RX descriptor as well. This seems to fix RX packet drops with high RX traffic. While at it flush the descriptors right before enabling RX/TX in sh_eth_tx_desc_init/sh_eth_rx_desc_init callbacks when they are ready instead of flushing after allocation. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: sh_eth: Drop reset GPIO handling in favor of common codeMarek Vasut
The common code is now capable of handling reset GPIO associated with PHY. Drop the local ad-hoc code in favor of common code. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: ravb: Drop reset GPIO handling in favor of common codeMarek Vasut
The common code is now capable of handling reset GPIO associated with PHY. Drop the local ad-hoc code in favor of common code. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: phy: Handle reset-delay-us/reset-post-delay-us propertiesMarek Vasut
These two properties are used by various DTs in place of current reset-assert-us/reset-deassert-us , handle both . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: phy: Bind ETH_PHY uclass driver to each new PHYMarek Vasut
In case a new PHY is created and DM_ETH_PHY is enabled, bind a generic PHY driver from ETH_PHY uclass to the PHY to have a matching DM representation of that PHY. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: phy: Unpublish phy_connect_dev()Marek Vasut
The phy_connect_dev() is legacy API, now that there are no users, make it internal to phy.c and unpublish it from headers. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: sunxi_emac: Switch to new U-Boot PHY APIMarek Vasut
Use new U-Boot phy_connect() API which also supports fixed PHYs. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: sh_eth: Switch to new U-Boot PHY APIMarek Vasut
Use new U-Boot phy_connect() API which also supports fixed PHYs. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: pch_gbe: Switch to new U-Boot PHY APIMarek Vasut
Use new U-Boot phy_connect() API which also supports fixed PHYs. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: ethoc: Switch to new U-Boot PHY APIMarek Vasut
Use new U-Boot phy_connect() API which also supports fixed PHYs. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: ave: Switch to new U-Boot PHY APIMarek Vasut
Use new U-Boot phy_connect() API which also supports fixed PHYs. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10net: altera_tsa: Switch to new U-Boot PHY APIMarek Vasut
Use new U-Boot phy_connect() API which also supports fixed PHYs. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-09 18:59:02 +0000