| Age | Commit message (Collapse) | Author |
|---|
|
into next
- Assorted cleanups and R-Car Gen4 watchdog driver
|
|
Moteen Shah <m-shah@ti.com> says:
This patch series adds the functionality to print the DM firmware
version being used. Before requesting TISCI for the DM version we
first check if the DM split mode capability exists, if yes, we proceed
onto making the call to TISCI for retrieving the version information.
DM split mode capability indicates that the DM is a separate binary
altogether and has its own versioning information similar to TIFS.
Boot Logs: https://gist.github.com/Jamm02/37864f605445944a0c0caf426e0aba50
Link: https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html#tisci-msg-query-fw-caps
Link: https://lore.kernel.org/r/20250609081434.1000377-1-m-shah@ti.com
|
|
Beleswar Padhi <b-padhi@ti.com> says:
This series adds remoteproc support on MCU R5F in Split mode.
During boot, ROM can bring up the boot R5F cores in either lockstep or
split mode based on X509 certificate flags. If booted in lockstep mode,
the MCU R5F cores will run first the R5 SPL, and then once A72 comes up,
will run the Device Manager (DM) firmware. But if booted in split mode, core
0 will run DM firmware and second core sits in WFI. Shut it down so that
other firmwares can later be loaded on them.
The shutdown of MCU R5 Core 1 is invoked at A72 SPL init, as by that
time Device Manager (DM) is up and running on R5 Core 0. The shutdown
of MCU R5 Core 1 is handled by Device Manager itself.
Test logs:
https://gist.github.com/3V3RYONE/ee8e3cb9aa5f4c5c00b059b9c14bfa98
Link: https://lore.kernel.org/r/20250609081429.1724643-1-b-padhi@ti.com
|
|
Add a function to retrieve information of the DM firmware's ABI versions,
RM/PM HAL, firmware version, etc using TI_SCI protocol.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
|
Add a new function to query the capabilities of the DM firmware, using
TI SCI protocol to retrieve a 64-bit firmware capability, where each bit
represents a specific capability supported by the firmware.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
|
Introduce response and request structs to receive and request
information regarding DM version, etc from TI SCI.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
|
Introduce response and request structs for receiving information
regarding FW/SOC capability from DM. The received capability can
further be used to call certain API's based on the feature supoorted
by the DM firmware.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
|
Acquire processor control before doing core reset operations in probe
routine. Release the control afterwards, so that it can be acquired
during core loading operations.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Add support of Renesas R-Car Gen4 watchdog timer. Timeouts up to
8184.0s are supported (CKS1 register is not involved). The watchdog
uses the clock of type CLK_TYPE_GEN4_MDSEL.
The timeout is set in
dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi section &rwdt.
This driver is based on upstream linux commit:
e70140ba0d2b("Get rid of 'remove_new' relic from platform driver struct")
Signed-off-by: Shmuel Leib Melamud <smelamud@redhat.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Rasmus Villemoes <ravi@prevas.dk> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
Link: https://lore.kernel.org/r/20250507121246.518691-1-ravi@prevas.dk
|
|
These all end up using the no-op prefetch() defined in linux/list.h,
because the only possible real implementation is in
arch/mips/include/asm/processor.h, which is behing
CONFIG_CPU_HAS_PREFETCH which is nowhere defined.
In order to be able to drop that fallback definition from list.h,
first remove all uses.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
Add support of CLK_TYPE_GEN4_MDSEL clock type to gen3_clk_get_rate64()
function. In particular, this type of clock is used by Renesas R-Car
Gen4 watchdog. It operates similarly to CLK_TYPE_GEN3_MDSEL clock.
Signed-off-by: Shmuel Leib Melamud <smelamud@redhat.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Atmel: Improve gadget disconnect stability by power cycling
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Fix ti_musb driver in gadget mode (with DM_USB_GADGET)
DFU:
- mmc/scsi backends when using 10 or more partitions
|
|
Contrary to the datasheet, setting both DETACH and PULLD_DIS bits to 1
does not always drive the DP and DM lines to high-impedance. This
prevents the host from reliably detecting a USB disconnect and subsequent
reconnect.
The symptom is that the first gadget command (e.g., dhcp) succeeds, while
subsequent commands (e.g., nfs) fail.
Disabling and re-enabling the controller entirely, instead of toggling the
PULLD_DIS bit, reliably generates a disconnect event.
The Linux driver works correctly because gadget_disconnect/gadget_connect
are always followed by gadget_udc_start/gadget_udc_stop. In U-Boot
pullup() is used solely.
This behavior has been observed on the SAM9X60-Curiosity and
AT91SAM9G25-EK boards and has been reported to Microchip.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Link: https://lore.kernel.org/r/20250602-pullup-v1-1-edcde5a050dd@hifiphile.com
[mkorpershoek: reworded commit title + comment to usba_udc_pullup()]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
Remove duplicate .ops assignment that was overriding the correct
ti_musb_gadget_ops with musb_usb_ops (host ops) in the ti_musb_peripheral
driver. This was causing U-Boot crashes when trying to call the
handle_interrupts operation since the wrong ops structure was being used.
Fixes: 7d98dbcc3dc ("usb: musb-new: Add support for DM_USB")
Fixes: 281eaf1ed83a ("usb: gadget: musb: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250611171031.840277-1-kory.maincent@bootlin.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
The third_arg for a dfu alt is read as an integer and is overloaded for
different supported backends. For ext4 and fat, this third_arg
represents the partition and forms the dev part string, which should
have its partition in hex. This commit fixes dfu ext4/fat usage for
devices with ten or more partitions.
Signed-off-by: Ivan Pang <ipman@amazon.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20250611050127.38011-1-ipman@amazon.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
6.15 + winbond"
Christian Marangi <ansuelsmth@gmail.com> says:
This small series sync linux/bitfield.h from Linux 6.15 and fix all
the compilation error due to a change in the header include.
The sync is needed to make it easier to support the winbond changes.
The changes are CI test with [1]
[1] https://github.com/u-boot/u-boot/pull/777
Link: https://lore.kernel.org/r/20250607211133.2005-1-ansuelsmth@gmail.com
|
|
Add Winbond W25N04KV flash support that use a different value to detect
ECC bitflip.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
E Shattow <e@freeshell.de> says:
Make consistent use of lowercase hexadecimal prefix '0x' throughout U-Boot.
There are a few remaining uses of uppercase 'X' to denote hexadecimal prefix
or placeholder in documentation and error messages.
External devicetree-rebasing dts/upstream and the generated code of
xilinx/zynq are ignored for the series.
Link: https://lore.kernel.org/r/20250606224558.1117422-1-e@freeshell.de
|
|
Use consistent lowercase hex prefix style in drivers/*
Does not change hex prefix case in allcaps uppercase style error messages
Signed-off-by: E Shattow <e@freeshell.de>
|
|
This function is currently a misnomer at times as we have cases where it
passes arguments to the image. In preparation for making that be a more
common case rename this function to jump_to_image(...). In order to do
this, rename jump_to_image in board_init_r(...) to jumper so that we do
not have a conflict.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Reword the commit message, adding missing cases of
jump_to_image_no_args()]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Sukrut Bellary <sbellary@baylibre.com> says:
This patch series adds the support for
1. In am33xx SoC[1], enhanced capture (eCAP) supports auxiliary PWM (APWM).
This series adds the PWM driver support for the APWM feature for eCAP on
AM33xx. AM335X_ECAP0_IN_PWM0_OUT is used to enable the backlight.
2. Fix build warning in ti-ehrpwm driver in dev_deb().
3. Enable eCAP0 PWM and LCD pin muxing to support splash screen on
AM335x EVM[2].
[1] AM335x TRM - https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
[2] AM335x EVM - https://www.ti.com/tool/TMDXEVM3358
per discussion on the earlier patch series,
https://lore.kernel.org/all/20250319202516.3300444-1-sbellary@baylibre.com/
dropping the device tree changes in this series due to OF_UPSTREAM
conflict.
As we are dropping the DT patch, started with the new series instead of
V2.
This series doesn't contain defconfig changes since we don't want to
enable LCD, splash screen and PWM support by default.
Enabling splash screen and PWM support in defconfig causes u-boot crash
on AM335x based beaglebone black. This will be handled in a separate
patch.
Link: https://lore.kernel.org/r/20250530212232.1686613-1-sbellary@baylibre.com
|
|
If CONFIG_PWM_TI_EHRPWM is enabled, it throws the build warning in
dev_dbg() due to incorrect format specifier as,
"warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but
argument 4 has type ‘fdt_addr_t’ {aka ‘unsigned int’}".
Fix this with the correct format specifier.
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
|
|
In am33xx SoC[1], enhanced capture (eCAP) supports auxiliary PWM (APWM).
This series adds the PWM driver support for the APWM feature for eCAP on
AM33xx.
eCAP HW also supports the capture mode. Currently, this driver only
supports APWM.
This is based on the Linux kernel driver -> drivers/pwm/pwm-tiecap.c
Version: v6.12
Tested on AM335x EVM[2].
[1] AM335x TRM - https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
[2] AM335x EVM - https://www.ti.com/tool/TMDXEVM3358
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
|
|
RAM drivers using Device Model currently lack of their own Kconfig menu
entry, which makes Kconfig put all options of the class in the top-level
menu of device drivers. These options are also incorrectly grouped with
pinctrl options in the generated .config, which is hard to read. Let's
create a menu entry for these drivers.
Fixes: 6c51df6859f ("dm: Add support for RAM drivers")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
When doing the investigation for commit 53bb8fdea12a ("mmc: Kconfig:
Correct dependencies SDHCI ADMA options") I missed the implications of
MMC_SDHCI_ADMA_HELPERS. The problem is that FSL_ESDHC via the
FSL_ESDHC_SUPPORT_ADMA2 option will also enable these helper functions.
This in turn means the correct dependency here is
MMC_SDHCI_ADMA_HELPERS and not *MMC_SDHCI_ADMA.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
dev_read_{s,u}32_default"
Quentin Schulz <foss+uboot@0leil.net> says:
Out of all the dev_read_*_default functions, only two do not properly
use the type as argument and return type: dev_read_u32_default and
dev_read_s32_default. They both use int instead of u32/s32.
Considering that it's generally not guaranteed that an int is 4 bytes
but also for consistency sake, let's have them use the expected type.
Note that I have not tested this, just stumbled upon that inconsistency
by chance.
Link: https://lore.kernel.org/r/20250528-dev_read_x32_default-v1-0-6ab1734dd7a2@cherry.de
|
|
dev_read_s32_default is for getting an s32 from a Device Tree property
and allows to take a default value if that property is missing.
Considering it calls ofnode_read_u32_default which takes a u32 and
returns a u32, it should do the same instead of using an int, especially
considering that int size is typically architecture-specific, as opposed
to s32/u32.
s32 and u32 being the same size, dev_read_s32* functions calling
ofnode_read_u32_default shouldn't be an issue (at the type level at
least) as the information will be stored appropriately in 4B regardless
of the sign.
This incidentally matches all other dev_read_*_default functions.
Fixes: a1b17e4f4c82 ("dm: core: Add a function to read into a unsigned int")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
dev_read_u32_default is for getting a u32 from a Device Tree property
and allows to take a default value if that property is missing.
Considering it calls ofnode_read_u32_default which takes a u32 and
returns a u32, it should do the same instead of using an int, especially
considering that int size is typically architecture-specific, as opposed
to u32.
This incidentally matches all other dev_read_*_default functions (except
dev_read_s32_default which will be tackled in the next commit).
Fixes: 47a0fd3bad38 ("dm: core: Implement live tree 'read' functions")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm into next
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/26607
- Add clock and reset drivers support for STM32MP25
- Add STM32H747-Discovery board support
- Add tamp_nvram driver
- Add SPL support and clock tree init to STM32MP13 RCC driver
- Add STM32MP13xx ram support
- Add support for STM32 Image V2.0 for STM32MP13xx
- Fix SYSRAM size on STM32MP13xx
- Fix DBGMCU macro on STM32MP13xx
- Auto-detect ROM API table on STM32MP15xx
|
|
The board includes an STM32H747XI SoC with the following resources:
- 2 Mbytes Flash
- 1 Mbyte SRAM
- LCD-TFT controller
- MIPI-DSI interface
- FD-CAN
- USB 2.0 high-speed/full-speed
- Ethernet MAC
- camera interface
Detailed information can be found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add support for configuring DRAM controller on STM32MP13xx SoC.
The DRAM controller is basically identical to the DWC controller
on STM32MP15xx SoC, except the bus width is reduced from 32bit to
16bit and a few registers and bits are therefore not present.
Handle the difference by factoring these parts out. Use IS_ENABLE()
as much as possible to assure code which is not enabled on builds
for a single SoC gets compiled out. Handle the different offset of
RCC_DDRITFCR register and missing DDRC2 clock the same way.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
|
|
Add SPL support and clock tree init to STM32MP13 RCC driver. This
consists of two parts, make SCMI into an optional dependency and
add clock tree initialization. The SCMI dependency is made optional
first by registering the few core clock provided by SCMI clock as
fixed clock, and second by letting the clock core parse out the
clock configuration from SoC registers. The clock initialization
code is derived from STM32MP15xx clock tree initialization code,
which is almost identical, except for the use of new PLL2000 for
PLL1 on STM32MP13xx .
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
|
|
Fix basic typo, missing t in security . No functional change .
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Implement STM32MP25 reset drivers using stm32-core-reset API.
This reset stm32-reset-core API and will be able to use DT binding
index started from 0.
This patch also moves legacy reset into stm32 directory reset.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
In RCC the ops of the CCF registered CLK device can be called directly,
this patch avoid recursive call of clk_ function done by CCF clock
framework which update the clock information, for example
clk_enable is called 2 times, clkp->enable_count is increased 2 times.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add private uclass data for "stm32-usbphyc-clk" as it is not done
by the driver model.
This clk struct is needed by CCF to save the unique id used to identify
each clock.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Each clock identifier needs to be unique when CCF is activated,
and it is not respected today by SCMI clock driver.
This patch supports a unique clk id by using the uclass API
clk_get_id() / dev_clk_dm() and by activating by default
CONFIG_CLK_AUTO_ID with CCF which adds an offset to the SCMI
clock identifiers.
After this patch, the SCMI clock driver can coexist with other
clock provider without conflict, they can share internal identifier
[0..N] defined in their binding and the clock ID = 0
(reserved for dummy clock) is no more used.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Update CLK ID to avoid 0 id, used for dummy clock with CCF
and to allow selection by clk_get_by_id, used to
get private data associated to the UCLASS_CLK device
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Update the sandbox driver to allow support of the
CONFIG_CLK_AUTO_ID by using the new API clk_get_id()
to get the internal SANDBOX identifier.
With CONFIG_CLK_AUTO_ID, clk->id have the also seq identifier.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add a new config CONFIG_CLK_AUTO_ID to support a unique clk id
for all the clock providers, managed by clk uclass, when the clock
reference arg[0] is the same.
When the CONFIG is activated, the clock id is limited to the lower
CLK_ID_SZ = 24 bits in default clock xlate function
and the sequence number + 1 of the clk provider device is
added for the 8 higher bits.
We use sequence number + 1 to avoid the "dummy" clock id = 0,
used for invalid clock when CCF is activated.
When this config is activated, the new function clk_get_id()
should be used to get back the internal reference to clock
for the each clock provider.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Check clock security to avoid access at boot time.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add clock driver support for STM32MP25 SoCs.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Since clock protocol 2.0, SCMI specification add an option field
"clock_enable_delay" to CLOCK_ATTRIBUTES command.
scmi_read_resp_from_smt() will return an error ("Buffer too small") as
the message length coming from the SCMI server is not the same as expected.
So implement a condition to SCMI clock protocol version to change the
length of the expected message.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add support for the self-test continue command in the TPM v1.2 emulator,
to match the functionality in the TPM v2 emulator.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Prepare v2025.07-rc4
|
|
This reverts commit 159b6f0e119962ce5da645f548cefe9196c8778e.
Since commit 159b6f0e1199 ("caam: Fix CAAM error on startup") the following
regression was reported by Tim Harvey:
"I've found that this patch causes a regression on an imx8mm board
(imx8mm_venice_defconfig) where the first call to caam_rng_read fails
here in jr_dequeue but if you call it again it works. With some
debugging added:
SEC0: RNG instantiated
...
Hit any key to stop autoboot: 0
u-boot=> rng list
RNG #0 - caam-rng
u-boot=> rng 0 10
caam_rng_read caam-rng len=16
run_descriptor_jr_idx idx=0
Error in SEC deq: -1
caam_rng_read_one run_descriptor_jr failed: -1
caam_rng_read caam-rng caam_rng_read_one failed: -5
Reading RNG failed
u-boot=> rng 0 10
caam_rng_read caam-rng len=16
run_descriptor_jr_idx idx=0
00000000: ad 2e ad c0 2a 12 27 c4 65 82 66 19 be ef f6 07 ....*.'.e.f.....
If I revert your patch caam_rng_read works initially and on subsequent
calls."
" I ran into this when I was testing
lwIP HTTPS as it causes anything that uses dm_rng to fail the first
time (such as HTTPS)."
Revert it for now to avoid the regression.
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
|
