summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-22net: macb: add support for sama7g5 gmacClaudiu Beznea
Add support for SAMA7G5 GMAC. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-22net: macb: check clk_set_rate return value to be negativeClaudiu Beznea
clk_set_rate() returns the set rate in case of success and a negative number in case of failure. Consider failure only the negative numbers. Fixes: 3ef64444de157 ("dm: net: macb: Implement link speed change callback") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-22net: macb: add user io config data structureClaudiu Beznea
Different implementation of USER IO register needs different mapping for bit fields of this register. Add implementation for this and, since clken is part of USER IO and it needs to be activated based on per SoC capabilities, add caps in macb_config where clken specific information needs to be filled. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-22pinctrl: at91-pio4: implement drive strength supportEugen Hristev
Implement drive strength support, by preserving the same bindings as in Linux. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-22pinctrl: at91-pio4: convert to dev_read_propEugen Hristev
Use dev_read_prop instead of using the fdt_read_property which reads from the GD struct's fdt. This way the node is accessed via the device config instead of the global struct, which makes code more portable and GD independent. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-19net: phy: micrel: fix typoClaudiu Beznea
Fix typo. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-19net: phy: micrel: add support for DLL setup on ksz9131Claudiu Beznea
Add support for DLL setup on KSZ9131. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-18Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- R-Car pinctrl updates
2021-01-18Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Update qemu-riscv.rst build instructions. - Add support for SPI on Kendryte K210. - Add Microchip PolarFire SoC Icicle Kit support. - Add support for an early timer. - Select TIMER_EARLY to avoid infinite recursion for Trace.
2021-01-18pinctrl: renesas: Implement get_pin_muxing() callbackLad Prabhakar
Implement get_pin_muxing() callback so that pinmux status command can be used on Renesas platforms. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2021-01-18pinctrl: renesas: Make sure the pin type is updated after setting the MUXLad Prabhakar
By default on startup all the pin types are configured to PINMUX_TYPE_NONE (in sh_pfc_map_pins()), when pin is set as GPIO the pin type is updated to PINMUX_TYPE_GPIO. But the type is not updated when the pin is set as a function in sh_pfc_pinctrl_pin_set() or sh_pfc_pinctrl_group_set() calls (these calls only set the MUX if the pin type is PINMUX_TYPE_NONE ie unused). So with the current implementation pin functionality could be overwritten silently, for example if the same pin is added for SPI and serial. This patch makes sure of updating pin type after every successful call to sh_pfc_config_mux() and thus fixing from pin functionality to be overwritten. Also a warning message is printed if the current pin is being overwritten before abort. This also avoids pin re-muxing to same type that is for example from command line device is asked to re-probe/select (mmc dev x) we return early with success in this case as the pin is already muxed. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2021-01-18clk: Add Microchip PolarFire SoC clock driverPadmarao Begari
Add clock driver code for the Microchip PolarFire SoC. This driver handles reset and clock control of the Microchip PolarFire SoC device. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2021-01-18net: macb: Add phy address to read it from device treePadmarao Begari
Read phy address from device tree and use it to find the phy device if not found then search in the range of 0 to 31. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2021-01-18net: macb: Add DMA 64-bit address support for macbPadmarao Begari
Enable 32-bit or 64-bit DMA in the macb driver based on the macb hardware compatibility and it is configured with structure macb_config in the driver. The Microchip PolarFire SoC Memory Protection Unit(MPU) gives the 64-bit DMA access with the GEM, the MPU transactions on the AXI bus is 64-bit not 32-bit So 64-bit DMA is enabled for the Microchip PolarFire SoC GEM. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2021-01-18riscv: timer: Add support for an early timerPragnesh Patel
Added support for timer_early_get_count() and timer_early_get_rate() This is mostly useful in tracing. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-16ram: k3-j721e: rename BIT_MASK()Heinrich Schuchardt
The macro BIT_MASK is already defined in include/linux/bitops.h. To avoid name collisions rename BIT_MASK() in drivers/ram/k3-j721e/lpddr4_private.h to LPDDR4_BIT_MASK(). Remove superfluous parantheses. Remove superfluous comparison to 0. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-16mtd: misplaced log.h and dm/devres.hHeinrich Schuchardt
log.h and dm/devres.h are U-Boot includes. So placing them behind #ifndef __UBOOT__ does not make any sense. Fixes: f7ae49fc4f36 ("common: Drop log.h from common header") Fixes: 61b29b826838 ("dm: core: Require users of devres to include the header") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-16drivers: serial: probe all uart devicesVabhav Sharma
U-Boot DM model probe only single device at a time which is enabled and configured using device tree or platform data method. PL011 UART IP is SBSA compliant and firmware does the serial port set-up, initialization and let the kernel use UART port for sending and receiving characters. Normally software talk to one serial port time but some LayerScape platform require all the UART devices enabled in Linux for various use case. Adding support to probe all enabled serial devices like SBSA compliant PL011 UART ports probe and initialization by firmware. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-01-16dm: core: add function uclass_probe_all() to probe all devicesVabhav Sharma
Support a common method to probe all devices associated with uclass. This includes data structures and code for finding the first device and looping for remaining devices associated with uclasses (groups of devices with the same purpose, e.g. all SERIAL ports will be in the same uclass). An example is SBSA compliant PL011 UART IP, where firmware does the serial port initialization and prepare uart device to let the kernel use it for sending and reveiving the characters.SERIAL uclass will use this function to initialize PL011 UART ports. The feature is enabled with CONFIG_DM. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-01-16power: regulator: Kconfig: add a dependency for POWER_SUPPORT for SPLNishanth Menon
power/regulator will not be built if just CONFIG_SPL_DM_REGULATOR is enabled. It needs CONFIG_SPL_POWER_SUPPORT to be enabled as well. For example, if we just need a GPIO regulator in SPL: CONFIG_DM_REGULATOR=y CONFIG_SPL_DM_REGULATOR=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPL_DM_REGULATOR_GPIO=y Will not suffice, since the entire regulator build for SPL depends on CONFIG_SPL_POWER_SUPPORT. Elaborate that information in the Kconfig dependency. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-01-16Kconfig: simple panel requires backlightMarcin Juszkiewicz
During build of simple panel driver backlight is needed so let's enable it: aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_set_backlight': u-boot/drivers/video/simple_panel.c:43: undefined reference to `backlight_set_brightness' aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_enable_backlight': u-boot/drivers/video/simple_panel.c:28: undefined reference to `backlight_enable' Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2021-01-15disk: dos: rename write_mbr_partition to write_mbr_sectorMarek Szyprowski
write_mbr_partition() function name is a bit misleading, so rename it to write_mbr_sector(). This is a preparation for adding code for writing a complete MBR partition layout. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-15common: board_r: Drop initr_bbmii wrapperOvidiu Panait
Add a return value to bb_miiphy_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_xen wrapperOvidiu Panait
Add a return value to xen_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_pci wrapperOvidiu Panait
Add a return value to pci_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_pci_ep wrapperOvidiu Panait
Add a return value to pci_ep_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15dm: fix build errors generated by last mergesDario Binacchi
Something was wrong in the merge process into the mainline. Some added patches access driver structure fields and functions that have been modified by previous patches. The patch renames: - dev_get_platdata to dev_get_plat - dev_get_uclass_platdata to dev_get_uclass_plat - ofdata_to_platdata to of_to_plat - plat_data_alloc_size to plat_auto - priv_auto_alloc_size to priv_auto - video_uc_platdata to video_uc_plat Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-15arm: socfpga: soc64: Add ATF support for FPGA reconfig driverChee Hong Ang
In non-secure mode (EL2), FPGA reconfiguration driver calls the SMC/PSCI services provided by ATF to configure the FPGA. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2021-01-15net: designware: socfpga: Add ATF support for MAC driverChee Hong Ang
In non-secure mode (EL2), MAC driver calls the SMC/PSCI services provided by ATF to setup the PHY interface. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-01-15mmc: dwmmc: socfpga: Add ATF support for MMC driverChee Hong Ang
In non-secure mode (EL2), MMC driver calls the SMC/PSCI services provided by ATF to set SDMMC's DRVSEL and SMPLSEL. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-01-15mmc: dwmmc: Change designware MMC 'clksel' callback function to return statusSiew Chin Lim
Change 'clksel' callback function to allow the code to return a status. This patch is a preparation for enabling Arm-Trusted-Firmware (ATF) in Intel SoC FPGA. This patch does not change functionality. When using Arm-Trusted-Firmware (ATF) in Intel SoC FPGA, the MMC clock related register is secure register which is required to be written via SMC/PCSI call. It is possible that U-Boot fail to write the register if there is unexpected error between U-Boot and ATF. As a result, there maybe signal integrity on MMC connection due to clock. So, the code should reports error to user when 'clksel' fail. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-01-13Merge tag 'u-boot-stm32-20210113' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Enable logging features for stm32mp15 boards - Update MAINTAINERS emails for STI and STM32 - Activate OF_LIVE for ST stm32mp15 boards - Switch to MCO2 for PHY 50 MHz clock for DHCOM boards - Correction in stm32prog command on uart: always flush DFU on start command - Update USB-C power detection algorithm on DK boards
2021-01-13Merge tag 'u-boot-amlogic-20210112' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync amlogic GX & AXG DT to Linux 5.10 - Add new MESON_EE driver support for GXBB & AXG - Add support for Libretech-CC v2, Wetek Core2, Beelink GT-King/Pro boards - add driver for TDO tl070wsh30 panel driver - meson: isolate loading of socinfo - Add soc_rev to environment - Enable G12A support for saradc - Add correct mmcdev on VIM3(L) & Odroid-N2(C4) - Read MAC from fuses for VIM3 & VIM3L boards
2021-01-13video: stm32_dsi: migrate trace to dev and log macroPatrick Delaunay
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13video: stm32_ltdc: migrate trace to dev and log macroPatrick Delaunay
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13serial: stm32: define LOG_CATEGORYPatrick Delaunay
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13memory: stm32-fmc2: migrate trace to dev and log macroPatrick Delaunay
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13mtd: stm32_fmc2: migrate trace to dev and log macroPatrick Delaunay
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13spi: stm32_qspi: migrate trace to dev and log macroPatrick Delaunay
Change debug/pr_* to log_* or dev_* macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13spi: stm32_spi: migrate trace to dev and log macroPatrick Delaunay
Change debug/pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13phy: stm32-usbphyc: migrate trace to dev and log macroPatrick Delaunay
Change pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13i2c: stm32f7_i2c: migrate trace to dev and log macroPatrick Delaunay
Change debug to dev_dbg macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-13mailbox: stm32-ipcc: migrate trace to dev and log macroPatrick Delaunay
Change debug to dev_dbg macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13reset: stm32-reset: migrate trace to dev and log macroPatrick Delaunay
Change debug to dev_dbg macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13clk: clk_stm32h7: migrate trace to dev and log macroPatrick Delaunay
Change debug and pr_ macro to dev macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13clk: clk_stm32f: migrate trace to dev and log macroPatrick Delaunay
Change debug and pr_ macro to dev macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13clk: stm32mp1: migrate trace to dev and log macroPatrick Delaunay
Change debug and pr_ macro to dev macro and define LOG_CATEGORY. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13misc: rcc: keep the rcc device name for subnodePatrick Delaunay
Update the name associated with the RCC drivers to avoid duplicated name with the driver name. With this patch the traces displayed with log macro provide a correct device name. The rcc device name before the patch is: Class Index Probed Driver Name ----------------------------------------------------------- root 0 [ + ] root_driver root_driver simple_bus 0 [ + ] simple_bus |-- soc (...) nop 0 [ + ] stm32-rcc | |-- rcc@50000000 clk 0 [ + ] stm32mp1_clk | | |-- stm32mp1_clk reset 0 [ + ] stm32_rcc_reset | | `-- stm32_rcc_reset And they become: (...) nop 0 [ + ] stm32-rcc | |-- rcc@50000000 clk 0 [ + ] stm32mp1_clk | | |-- rcc@50000000 reset 0 [ + ] stm32_rcc_reset | | `-- rcc@50000000 The traces is correct: stm32mp1_clk rcc@stm32mp1_clk: ..... => stm32mp1_clk rcc@50000000: ..... Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13misc: rcc: migrate trace to dev macroPatrick Delaunay
Change debug and pr_err to dev macro and define LOG_CATEGORY. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13power: regulator: stm32-verfbuf: define LOG_CATEGORYPatrick Delaunay
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 12:32:01 +0000