summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-08crypto: fsl: refactor for 32 bit version CAAM support on ARM64Ye Li
Previous patch "MLK-18044-4: crypto: caam: Fix pointer size to 32bit for i.MX8M" breaks the 64 bits CAAM. Since i.MX CAAM are all 32 bits no matter the ARM arch (32 or 64), to adapt and not break 64 bits CAAM support, add a new config CONFIG_CAAM_64BIT and new relevant type "caam_dma_addr_t". This config is default enabled when CONFIG_PHYS_64BIT is set except for iMX8M. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08fsl_mfgprot: Fix typo in sign_mppubk()Breno Lima
The signature is generated using manufacturing protection private key. Fix typo in fsl_mfgprot.c. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8m: Add DEK blob encapsulation for imx8mClement Faure
Add DEK blob encapsulation support for IMX8M through "dek_blob" command. On ARMv8, u-boot runs in non-secure, thus cannot encapsulate a DEK blob for encrypted boot. The DEK blob is encapsulated by OP-TEE through a trusted application call. U-boot sends and receives the DEK and the DEK blob binaries through OP-TEE dynamic shared memory. To enable the DEK blob encapsulation, add to the defconfig: CONFIG_SECURE_BOOT=y CONFIG_FAT_WRITE=y CONFIG_CMD_DEKBLOB=y Signed-off-by: Clement Faure <clement.faure@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Watchdog, Unleashed and Icicle improvements
2021-04-08clk: mpfs_clk: Enable DM_FLAG_PRE_RELOC flagBin Meng
This driver is needed in the pre-relocation phase as the serial driver depends on it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2021-04-08timer: sifive_clint: Support the official clint DT bindingsBin Meng
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings") adds the official DT bindings for CLINT, which uses "sifive,clint0" as the compatible string. "riscv,clint0" is now legacy and has to be kept for backward compatibility of legacy systems. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: sifive: Rename fu540 board to unleashedBin Meng
In preparation to add SiFive Unmatched board support, let's rename the existing fu540 board to unleashed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08wdt: dw: Free the clock on errorSean Anderson
The clock subsystem requires that clk_free be called on clocks obtained via clk_get_*. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-08wdt: dw: Enable the clock before using itSean Anderson
The watchdog won't work if the clock isn't enabled. Fixes: cf89ef8d10f240554541c20b2e1bdcdd58d1d7e6 Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-08wdt: dw: Switch to if(CONFIG()) instead of using #ifSean Anderson
This is preferred over #if because the compiler can check syntax even if the feature is disabled. This cannot be used for CONFIG_CLK because CONFIG_DW_WDT_CLOCK_KHZ is not defined on all platforms. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-08wdt: dw: Switch to using fls for log2Sean Anderson
log_2_n_round_up is only found in arm. fls performs the same job and is generic. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-08crypto: caam: Fix pointer size to 32bit for i.MX8MAymen Sghaier
The CAAM block used in i.MX8M is 32 bits address size but when the flag PHYS_64BIT is enabled for armv8, the CAAM driver will try to use a wrong pointer size. This patch fixes this issue. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08crypto: caam: Fix build warnings pointer castingAymen Sghaier
Enabling CAAM driver for i.MX8M platforms, a 64 bits architecture, lead to casting warnings: from/to pointer to/from integer with different size. This patch fix these warnings Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08crypto: caam: Add CAAM support to i.MX8M platformsAymen Sghaier
This patch enable CAAM support for i.MX8M platforms. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08caam: enable support for iMX7ULPFranck LENORMAND
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08crypto: caam: change JR running loopFranck LENORMAND
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08crypto: fsl: blob: Flush dcache range for destination addressBreno Lima
The blob command is not working on i.MX7D, i.MX8MQ and i.MX8MM devices. Due to different cache management it's necessary to flush dcache range for destination address so data can be available in memory. Add necessary operations in blob_encap() and blob_decap() functions. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: imx7 Support for Manufacturing ProtectionBreno Lima
This code was originally developed by Raul Cardenas <raul.casas@nxp.com> and modified to be applied in U-Boot imx_v2017.03. More information about the initial submission can be seen in the link below: https://lists.denx.de/pipermail/u-boot/2016-February/245273.html i.MX7D has an a protection feature for Manufacturing process. This feature uses asymmetric encryption to sign and verify authenticated software handled between parties. This command enables the use of such feature. The private key is unique and generated once per device. And it is stored in secure memory and only accessible by CAAM. Therefore, the public key generation and signature functions are the only functions available for the user. The manufacturing-protection authentication process can be used to authenticate the chip to the OEM's server. Command usage: Print the public key for the device. - mfgprot pubk Generates Signature over given data. - mfgprot sign <data_address> <data_size> Signed-off-by: Raul Ulises Cardenas <raul.casas@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08misc: ocotp: Update OCOTP driver for iMX8MQ B2Ye Li
i.MX8MQ B2 also has fixed value in OCOTP_READ_FUSE_DATA register, so it does not support "fuse sense" command like B1. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08power: pca9450: add a new parameter for power_pca9450_initPeng Fan
Currently PCA9450 might have address 0x25 or 0x35, so let user choose the address. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-08imx8mp: refine power on imx8mp boardhaidong.zheng
VDD SOC normal run changed to 0.85V LPDDR4 freq0 change from 4000MTS to 2400MTS Signed-off-by: haidong.zheng <haidong.zheng@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08mmc: mvebu: convert to driver modelHarm Berntsen
This is a straightforward conversion of the old, non-dm driver. It was done in-place as the deadline for non-dm MMC has passed. Previous commits ensured that no board depends on the old, non-dm variant. Tested on a Kirkwood based board with eMMC. Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Tested-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> CC: Pantelis Antoniou <panto@antoniou-consulting.com> CC: Stefan Roese <sr@denx.de> CC: Gerald Kerma <drEagle@doukki.net> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-08rtc: add armada38x driverMarek Behún
Add RTC driver for Armada 38x, based on Linux' driver. For now implement only `marvell,armada-380-rtc` compatible. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Chris Packham <judge.packham@gmail.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Pali Rohár <pali@kernel.org>
2021-04-06Merge tag 'mmc-2021-4-6' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Update hwpartition usage Check bootbus's arguments workaround for erratum A-011334 for fsl_esdhc driver add pulse width detection workaround for fsl_esdhc driver Use alias num before checking mmc index when creating device
2021-04-06Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
- XHCI fixes
2021-04-06usb: xhci: Make debug output better readable and checkpatch cleanStefan Roese
This change makes debugging a bit easier as the output is better readable with the added space. The explicit le16_to_cpu() is not needed in the output. Also this patch moves the strings into one line to make the patch checkpatch clean. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2021-04-06usb: xhci: Add missing xhci_readl()Aaron Williams
Accessing the xHCI controller registers should be done via the xhci_readl/writel functions. This patch adds this to a few missing places. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2021-04-06Merge tag 'u-boot-amlogic-20210406' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - Add MMIO MDIO mux driver - Add Amlogic G12A MDIO mux driver - Add DM_MDIO support for designware ethernet driver - Add Amlogic Meson8b and later designware ethernet glue driver - Switch all amlogic boards to Amlogic designware ethernet glue driver - Switch all amlogic boards to DM_MDIO when necessary - Remove all static ethernet setup code
2021-04-06Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Enhance WDT handling (starting / stopping) and introduce CONFIG_WATCHDOG_AUTOSTART to allow disabling of autostart of the WDT (Pali)
2021-04-06Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flashTom Rini
- Fix detection of 8-bit bus flash devices via address shift
2021-04-06mmc: mmc-uclass: Use dev_seq() to read aliases node's indexAswath Govindraju
Use dev_seq() to read aliases node's index and pass it as device number for creating bulk device. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06mmc: Check for device with a seq number equal to num before checking against ↵Aswath Govindraju
index First check if there is an alias for the device tree node defined with the given num before checking against device index. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06mmc: fsl_esdhc: add pulse width detection workaroundMichael Walle
HS400 mode on the LS1028A SoC isn't reliable. The linux driver has a workaroung for the pulse width detection. Apply this workaround in u-boot, too. This will make HS400 mode work reliably on the LS1028A SoC. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06mmc: fsl_esdhc: add workaround for erratum A-011334Michael Walle
LS1028A SoCs are restricted in what divider values are allowed for HS400 mode. This is basically a port from the corresponding linux driver. Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06net: designware: remove amlogic compatiblesNeil Armstrong
These compatibles are now handled by the dwmac_meson8b glue driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06net: designware: add Amlogic Meson8b & later glue driverNeil Armstrong
This adds a proper glue driver for the Designware DWMAC ethernet MAC IP found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs. This is aimed to replace the static ethernet link setup found on the board init code for the Amlogic SoC based boards. Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d with external 10/100/1000 RGMII PHY) to cover the most extreme setups. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06net: add Amlogic Meson G12A MDIO MUX driverNeil Armstrong
The Amlogic G12A & compatible SoCs embeds a mux to either communicate with the external PHY or the internal 10/100 PHY. This adds support for this mux as a MDIO MUX device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-06net: designware: add DM_MDIO supportNeil Armstrong
Add support for DM_MDIO to connect to PHY and expose a MDIO device for the internal MDIO bus in order to dynamically connect to MDIO PHYs with DT with eventual MDIO muxes in between. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-06net: add MMIO Register MDIO MUX driverNeil Armstrong
Add support for MMIO register MDIO muxes based on the Linux mdio-mux-mmioreg driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-06watchdog: Allow to use CONFIG_WDT without starting watchdogPali Rohár
In some cases it is useful to compile support for U-Boot command 'wdt' without starting HW watchdog in early U-Boot phase. For example when the user want to start the watchdog only on demand by some boot script. This change adds a new compile option WATCHDOG_AUTOSTART to control whether U-Boot should automatically start the watchdog during init phase or not. This option is enabled by default as it was the default behavior prior introducing this new change. When compiling U-Boot users can decide to turn this option off. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06watchdog: Show error message when initr_watchdog() cannot start watchdogPali Rohár
Function wdt_start() may fail. So in initr_watchdog() function check return value of wdt_start() call and print error message when watchdog starting failed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06watchdog: Set/unset GD_FLG_WDT_READY flag in wdt_start()/wdt_stop()Pali Rohár
Watchdog is ready after successful call of ops->start() callback in wdt_start() function. And is stopped after successful call of ops->stop() callback in wdt_stop function. So move setting of GD_FLG_WDT_READY flag from initr_watchdog() function to wdt_start() and ensure that GD_FLG_WDT_READY flag is unset in wdt_stop() function. This change ensures that GD_FLG_WDT_READY flag is set only when watchdog is running. And ensures that flag is also also when watchdog was started not only by initr_watchdog() call (e.g. by U-Boot 'wdt' command). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06cfi_flash: Fix detection of 8-bit bus flash devices via address shiftJagannadha Sutradharudu Teki
We had a problem detecting 8/16bit flash devices connected only via 8bits to the SoC for quite a while. Commit 239cb9d9 [mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support] finally fixed this 8-bit bus support. But also broke some other boards using this cfi driver. So this patch had to be reverted. I spotted a different, simpler approach for this 8-bit bus support on the barebox mailing list posted by Oleksij Rempel <bug-track@fisher-privat.net>: http://www.spinics.net/lists/u-boot-v2/msg14687.html Here the commit text: " Many cfi chips support 16 and 8 bit modes. Most important difference is use of so called "Q15/A-1" pin. In 16bit mode this pin is used for data IO. In 8bit mode, it is an address input which add one more least significant bit (LSB). In this case we should shift all adresses by one: For example 0xaa << 1 = 0x154 " This patch now is a port of this barebox patch to U-Boot. Along with the change w.r.t from barebox, Some flash chips can support multiple bus widths, override the interface width and limit it to the port width. Tested on 16-bit Spansion flash on sequoia. Tested 8-bit flashes like 256M29EW, 512M29EW. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Cc: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Mario Six <mario.six@gdsys.cc> Cc: York Sun <york.sun@nxp.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-04-06pinctrl: Return -ENOSYS when system call is not availableSimon Glass
Update the code to use -ENOSYS, which is the correct error code for an unimplemented system call in U-Boot. Also we should not check for a missing operations array as this is not permitted. For now this can be covered by an assert(). Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-06simple-pm-bus: Use -ENOSYS for checking missing system callSimon Glass
We don't need to check -ENOTSUPP since this is not used for this purpose in U-Boot. Update the code accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-04-06clk: Return -ENOSYS when system call is not availableSimon Glass
Update clk_composite_set_parent() to use -ENOSYS, which is the correct error code for U-Boot. Also rearrange the code so that the error condition is clearly indicated and the function runs to the end in the normal case, since this is the common style in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-04-06clk: Update drivers to use -EINVALSimon Glass
At present some drivers use -ENOSUPP to indicate that an unknown or unsupported clock is used. Most use -EINVAL, indicating an invalid value, so convert everything to that. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06usb: Return -ENOSYS when system call is not availableSimon Glass
Update usb_gadget_release() to use -ENOSYS, which is the correct error code for U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-06dm: core: Use -ENOSPC in acpi_get_path()Simon Glass
Update this function to use -ENOSPC which is more commly used when a buffer runs out of space. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-31Merge tag 'xilinx-for-v2021.07' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.07 net: - Fix gem PCS support spi: - Small trivial fixes zynq: - Enable time/timer commands - Update bitmain platform - Several DT changes zynqmp: - Update clock driver - mini config alignments - Add/update psu_init for zcu208/zcu216/zc1275 - Several DT changes - Enable efi debug command (also for Versal)
generated by cgit v1.2.3 (git 2.0.4) at 2025-09-20 14:19:31 +0000