summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-07-17x86: Convert some debug statements to use loggingSimon Glass
Move from using debug() to log_debug() so that we don't have to use the __func__ parameter and can access other logging features. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17x86: Record the start and end of the tablesSimon Glass
The ACPI tables are special in that they are passed to EFI as a separate piece, independent of other tables. Also they can be spread over two areas of memory, e.g. with QEMU we end up with tables kept in high memory as well. Add new global_data fields to hold this information and update the bdinfo command to show the table areas. Move the rom_table_end variable into the loop that uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17pci: Mask the ROM address in case it is already enabledSimon Glass
In some cases the video ROM may have been enabled previously, such as by a previous firmware stage. Use the correct address in that case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17pci: Adjust video BIOS debugging to be SPL-friendlySimon Glass
A hex value is expected for the VGA mode. Add a 0x prefix, since the # construct is not supported in SPL. We don't want to add it, due to code-size constraints. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17x86: Pass video settings from SPL to U-Boot properSimon Glass
When video is set up in SPL, U-Boot proper needs to use the correct parameters so it can write to the display. Put these in a bloblist so they are available to U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17x86: Allow video-BIOS code to be built for SPLSimon Glass
With qemu-x86_64 we need to run the video BIOS while in 32-bit mode, i.e. SPL. Add a Kconfig option for this, adjust the Makefile rules and use CONFIG_IS_ENABLED() where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17pci: Tidy up logging and reporting for video BIOSSimon Glass
When running the ROM the code is not very helpful when something goes wrong. Add a little more debugging and some logging of return values to improve this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17pci: Support autoconfig in SPLSimon Glass
Allow PCI autoconfig to be handled in SPL, so that we can set it up correctly for boards which need to do this before U-Boot proper. This includes qemu-x64_64 which needs to set up the video device while in 32-bit mode. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17nvme: Provide more useful debugging messagesSimon Glass
When scanning fails it is useful to be able to decode what went wrong. Add some debugging for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17qfw: Set the address of the ACPI tablesSimon Glass
Once the ACPI tables have been set up, record their address so that it is possible to list them with 'acpi list'. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17bios_emulator: Drop VIDEO_IO_OFFSETSimon Glass
This is always zero in the source tree, so drop it. While we are here, add a comment to _X86EMU_env since the symbol is actually defined twice, which can cause confusion when building. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17bios_emulator: Add Kconfig and adjust Makefile for SPLSimon Glass
The Kconfig for this is currently inside a particular board. Move it into the correct place and allow use in SPL, so that video can be used there if needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-16bootstd: Use bootdev instead of bootdeviceSimon Glass
It seems better to call this a 'bootdev' since this is name used in the documentation. The older 'Bootdevice' name is no-longer used and may cause confusion with the 'bootdevice' environment variable. Update throughout to use bootdev. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-14ufs: Use 'TASK_TAG' to construct the ucd_req_ptr->header.dword_0Bhupesh Sharma
Instead of using the hard-coded value of 0x1f, use 'TASK_TAG' macro instead to construct the ucd_req_ptr->header.dword_0 This is in sync with what the Linux UFS driver does, i.e. set the byte0 equal to TASK_TAG (see [1]). Setting it to a fixed value of 0x1f is wrong as we define TASK_TAG as 0 inside u-boot ufs framework. So, instead we should use the macro value directly. [1]. https://github.com/torvalds/linux/blob/master/drivers/ufs/core/ufshcd.c#L2705 Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
2023-07-14drivers: led: bcm6753: do not use null label to find the topPhilippe Reynes
This driver considers that a node with an empty label is the top. But the led class has changed, if a label is not provided for a led, the label is filed with the node name. So we update this driver to use a wrapper to manage the top led node. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2023-07-14net: ti: am65-cpsw-nuss: Use dedicated port mode control registersAndreas Dannenberg
The different CPSW sub-system Ethernet ports have different PHY mode control registers. In order to allow the modes to get configured independently only the register for the port in question must be accessed, otherwise we would just be re-configuring the mode for port 1, while leaving all others at their power-on defaults. Fix this issue by adding a port-number based offset to the mode control base register address based on the fact that the control registers for the different ports are spaced exactly 0x4 bytes apart. Fixes: 9d0dca1199d1 ("net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver") Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-07-14firmware: scmi: return a right errno for SCMI status codeAKASHI Takahiro
scmi_to_linux_errno() is set to return an appropriate errno which corresponds to a given SCMI status code. But the current implementation always returns the same value. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2023-07-14clk: scmi: claim the dependency on CONFIG_CLKAKASHI Takahiro
Without CONFIG_CLK, the build fails with the following message: LD u-boot aarch64-none-linux-gnu-ld.bfd: drivers/firmware/scmi/scmi_agent-uclass.o: \ in function `scmi_bind_protocols': .../drivers/firmware/scmi/scmi_agent-uclass.c:79: undefined reference to \ `_u_boot_list_2_driver_2_scmi_clock' Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2023-07-14misc: npcm_host_intf: change initialization sequenceJim Liu
configuration should be done before release host wait Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-07-14pinctrl: nuvoton: fix reset reason error for poweronJim Liu
In non tip mode, BMC first power on with PORST+CORST. the gpio status will error. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-07-14misc: nuvoton: fix type errorJim Liu
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-07-14video: Update stb_truetypeSimon Glass
This was brought in in 2016 and a number of changes have been made since then. There does not seem to be much change in functionality, but it is a good idea to update from time to time. Bring in the latest version: 5736b15 ("re-add perlin noise again") Add a few necessary functions, with dummies in some cases. Update the tests as there are subtle changes in rendering, perhaps not for the better. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14video: Use enum with video_index_to_colour()Simon Glass
Use the provided enum with this function, so it is clearer what should be passed to it. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14console: Allow measuring the bounding box of textSimon Glass
For laying out text accurately it is necessary to know the width and height of the text. Add a measure() method to the console API, so this can be supported. Add an implementation for truetype and a base implementation for the normal console. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14video: Allow temporary colour changesSimon Glass
It is sometimes necessary to highlight some text in a different colour. Add an easy way to do this and then restore the original console colours. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14fdt: Allow more general use of livetreeSimon Glass
At present livetree can only be used for the control FDT. It is useful to be able to use the ofnode API for other FDTs, e.g. those used by the upcoming configuration editor. We already have most of the support present, and tests can be marked with the UT_TESTF_OTHER_FDT flag to use another FDT as a special case. But with this change, the functionality becomes more generally available. Plumb in the require support. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14fdt: Clarify the fdt pre-relocation warningSimon Glass
Reword this so it is easier to understand. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14console: Correct truetype spacing errorSimon Glass
The putc_xy() method is supposed to return the amount of space used. The existing implementation erroneously adds the previous sub-pixel position to the returned value. This spaces out the characters very slightly more than it should. It is seldom noticeable but it does make accurate measurement of the text impossible. Fix this minor but long-standing bug. Fixes: a29b012037c ("video: Add a console driver that uses TrueType fonts") Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14video: Provide a way to clear part of the consoleSimon Glass
This is useful when the background colour must be written before text is updated, to avoid strange display artifacts. Add a function for this, using the existing code from the truetype console. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14video: Drop #ifdefs from console_truetypeSimon Glass
Use if() instead to reduce the number of build paths. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14dm: core: Avoid registering an inaccessible treeSimon Glass
At present there are various restrictions on the use of livetree: - It is only available once the tree is unflattened, i.e. after relocation - It is designed to be used with the control FDT - It can (in principle) be used with other FDTs, but only if they are unflattened first; this is not supported Add a few checks to make sure that any tree that is created is actually valid. Otherwise it can be confusing when nodes and properties cannot actually be accessed. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14gpio: Avoid using an invalid ofnodeSimon Glass
Devices do not necessarily have nodes attached to them, since they can be created from platdata. In SPL a devicetree may in fact not exist at all. Check the node before using it. This avoids failure when OF_CHECKS is enabled. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 5fc7cf8c8e2 ("gpio: add gpio-hog support") Reviewed-by: Heiko Schocher <hs@denx.de>
2023-07-13Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- Add xtxtech spi-nor chip parts (Bruce Suen) - Add bcm63xx-hsspi driver fixes (William Zhang)
2023-07-13Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- mvebu: Thecus: Misc enhancement and cleanup (Tony) - mvebu: Add AC5X Allied Telesis x240 board support incl NAND controller enhancements for this SoC (Chris)
2023-07-13Merge tag 'u-boot-imx-20230713' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20230713 ------------------- Merge for 2023.10. CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16888
2023-07-13clk: imx8mp: Update clocks based on kernel 6.4-RC4Adam Ford
There are some newer clocks added to the kernel recently, so to fix prepare for resycing the device trees, update the clock list. Since there are some minor changes to the USB clocks, update which USB clocks are enabled to match with the upstream kernel as well. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice-gw74xx
2023-07-13dm: adc: add iMX93 ADC supportLuca Ellero
This commit adds driver for iMX93 ADC. The driver is implemented using driver model and provides ADC uclass's methods for ADC single channel operations: - adc_start_channel() - adc_channel_data() - adc_stop() ADC features: - channels: 4 - resolution: 12-bit Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
2023-07-13imx: imx8ulp: start the ELE RNG at bootPeng Fan
On the imx8ulp A1 SoC, the ELE RNG needs to be manually started. Signed-off-by: Clement Faure <clement.faure@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: misc: ele_mu: Update ELE MU driverYe Li
Extend the RX timeout value to 10s, because when authentication is failed the ELE needs long time (>2s for 28M image) to return the result. Print rx wait info per 1s. Also correct TX and RX status registers in debug. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: misc: ele_mu: Update MU TR registers countYe Li
According to SRM, the Sentinel MU has 8 TR and 4 RR registers. All of them are used for ELE message. So update TR count to 8 and fix a typo in receive msg Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: ele_api: add DEK Blob generationPeng Fan
- Add crc computation. - Add ele_generate_dek_blob API for encrypted boot support. Signed-off-by: Clement Faure <clement.faure@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: ele_api: support program secure fuse and return lifecyclePeng Fan
Add two ELE API: ele_return_lifecycle_update and ele_write_secure_fuse Add two cmd: ahab_return_lifecycle and ahab_sec_fuse_prog Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: use generic name ele(EdgeLockSecure Enclave)Peng Fan
Per NXP requirement, we rename all the NXP EdgeLock Secure Enclave code including comment, folder and API name to ELE to align. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: scu_api: update to version 1.16 and add more APIsPeng Fan
Upgrade SCFW API to 1.16 Add more APIs: sc_misc_get_button_status sc_pm_reboot sc_seco_v2x_build_info Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13imx: mach: correct SCU API usagePeng Fan
The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13mtd: spi-nor: Add support for w25q256jwmVenkatesh Yadav Abbarapu
Add support for Winbond 256M-bit flash w25q256jwm. Performed basic erase/write/readback operations on ZynqMP zc1751+dc1 board. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-07-13spi: npcm_pspi: use ACTIVE_LOW flag for cs gpio and set default max_hzJim Liu
If cs gpio is requested with ACTIVE_HIGH flag, it will be pulled low(i.e. active). This is not what we expected. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-07-13mtd: spi-nor-ids: add xtxtech part#Bruce Suen
add following XTX part numbers to the list: xt25f08: 3V QSPI, 8Mbit xt25f16: 3V QSPI, 16Mbit xt25f32: 3V QSPI, 32Mbit xt25f64: 3V QSPI, 64Mbit xt25f128: 3V QSPI, 128Mbit xt25f256: 3V QSPI, 256Mbit xt25q08: 1.8V QSPI, 8Mbit xt25q16: 1.8V QSPI, 16Mbit xt25q32: 1.8V QSPI, 32Mbit xt25q64: 1.8V QSPI, 64Mbit xt25q128: 1.8V QSPI, 128Mbit xt25q256: 1.8V QSPI, 256Mbit xt25q512: 1.8V QSPI, 512Mbit xt25q01g: 1.8V QSPI, 1Gbit xt25w512: wide voltage, QSPI, 512Mbit xt25w01g: wide voltage, QSPI, 1Gbit remove xt25f128b and add xt25f128,because xt25f128b andxt25f128f share same jdec id,we use xt25f128 instead. Signed-off-by: Bruce Suen <bruce_suen@163.com> [jagan: re-edited the entire patch] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2023-07-13mtd: spi-nor-ids: change full company name of XTXBruce Suen
XTX changed full company name from "XTX Technology (Shenzhen) Limited to "XTX Technology Limited" since 2020,So remove "(Shenzhen)". Signed-off-by: Bruce Suen <bruce_suen@163.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-07-13spi: soft_spi: Support the recommended soft spi propertiesFabio Estevam
According to Documentation/devicetree/bindings/spi/spi-gpio.yaml from Linux, the recommended spio-gpio properties are: sck-gpios, miso-gpios and mosi-gpios. gpio-sck, gpio-mosi and gpio-miso are considered deprecated. Currently, U-Boot only supports the deprecated properties. Allow the soft_spi driver to support both the new and old properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-10 17:24:20 +0000