summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-04-13net: dm9000: Reorder and staticizeMarek Vasut
Reorder the driver functions to get rid of forward declarations. Staticize whatever is possible. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Checkpatch cleanupMarek Vasut
Fix checkpatch errors and warnings. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Drop volatilesMarek Vasut
Remove volatile keyword usage from arrays, they are not really volatile in any way, so this keyword is misused here. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Turn DM9000_DMP_PACKET() into a functionMarek Vasut
Rework DM9000_DMP_PACKET() into dm9000_dump_packet() function, this brings better type checking. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Drop unused dump_regs()Marek Vasut
Drop unused function dump_regs() because it is unused. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Make RxLen and RxStatus lowercaseMarek Vasut
Rename variables to lowercase to be consistent with coding style. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Replace DM9000_DBG() with debug()Marek Vasut
Use standard debug() macro to print debug messages instead of reinventing driver-specific macro again. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Make accessor names lowercaseMarek Vasut
Make accessor names lowercase to be consistent with coding style. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13driver: net: ti: keystone_net: Change priv member typeMarek Behún
Change type of private struct member mdio_base from void * to phys_addr_t. This allows us to drop 2 casts. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-13driver: net: ti: keystone_net: Convert to ofnode functionsMarek Behún
Convert fdt parsing functions to ofnode parsing functions. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-13driver: net: ti: keystone_net: Deduplicate codeMarek Behún
Deduplicate common code in ks2_eth_bind_slaves(). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-13Merge tag 'u-boot-imx-20220413' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220413 i.MX patches for 2022.07 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11710
2022-04-13clk: imx8mp: Fix 24M and 32k clockMarek Vasut
Fix registration of 24M and 32k clock, those got applied or rebased incorrectly, so fill in the correct code. Fixes: 7a2c3be95a5 ("clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com>
2022-04-12clk: imx8mp: Add ECSPI clocksElmar Albert
Add clock tables required for bing up ECSPI interfaces Signed-off-by: Elmar Albert <ealbert@data-modul.com> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com> Signed-off-by: Elmar Albert <ealbert@data-modul.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12clk: imxrt: Use dts for anatop base addressJesse Taube
In Linux IMX and IMXRT use the device tree to hold the anatop address. The anatop is used in clock drivers as it controls the internal PLLs This will move the macro from asm/arch-imxrt to the device tree. This presumably should also be done with the other IMX boards as well. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-04-12mmc: fsl_esdhc_imx: Add i.MX8MP compatible stringMarek Vasut
Add compatible string for i.MX8MP, which permits i.MX8MP to use HS400ES mode, just like all the other i.MX8M. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Haibo Chen <haibo.chen@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-04-12spi: nxp_fspi: Add i.MX8MP compatible stringMarek Vasut
The i.MX8M Mini and i.MX8M Plus flexspi IPs are compatible with one another, however the linux kernel DT uses separate compatible string for each SoC. Add the missing i.MX8MP compatible into this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-04-12net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driverMichael Trimarchi
Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special BroadRReach 100BaseT1 PHYs used in automotive. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-12net: phy: Add phy_modify() accessorAriel D'Alessandro
Add read-modify-write unlocked accessor for accessing a PHY register. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-12iopoll: Extend read_poll_timeout macro to support variable parametersAriel D'Alessandro
This macro currently supports only one parameter. Based on Linux iopoll, let's extend read_poll_timeout common API to allow multiple variable parameters. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-04-12phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specificAriel D'Alessandro
This driver supports NXP C45 TJA11XX PHYs, but there're also other NXP TJA11XX PHYs. Let's rename functions in this driver to be c45 variant specific, so further drivers can be introduced adding support for NXP TJA11XX PHYs. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-04-12driver: pwm: pwm-imx: separe dm from non dm implementationTommaso Merciai
Separe dm implementation from non dm implementation of pwm-imx driver using CONFIG_DM_PWM Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
2022-04-12drivers: pwm: pwm-imx: move pwm-imx-util into pwm-imxTommaso Merciai
Move pwm_imx_get_parms, pwm_id_to_reg functions into pwm-imx.c and drop off pwm-imx-util.c Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
2022-04-12regulator: fixed: add possibility to enable by clockPhilippe Schenker
This commit adds the possibility to choose the compatible "regulator-fixed-clock" in devicetree. This is a special case of regulator-fixed where a clock has to be used to switch the regulator on and off. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12misc: imx8ulp: Update fuse driverPeng Fan
- According to S400 API, the fuse bank 25 (Testconfig2) is able to access. Add it into driver's mapping table. - According to FSB words list, the reserved 48 words are ahead of the bank 5 and bank 6. Fix the wrong position. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12misc: S400_API: Update S400 API for buffer dumpYe Li
Add ahab_dump_buffer API to dump AHAB buffer for debug purpose Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12misc: S400_API: add ahab_release_caamClement Faure
Add ahab_release_caam() function to the S400 API. Signed-off-by: Clement Faure <clement.faure@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12misc: imx8ulp: Add OEM SRK Hash fuse supportYe Li
Since latest S400 firmware has supported to read OEM SRK Hash, add it to the driver's table Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHYMarek Vasut
Add initial support for i.MX8MP USB PHY, i.MX8MP USB is similar to the i.MX8MQ, except for clock and power domain design customization. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice-gw74xx
2022-04-12clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clockMarek Vasut
Add clock tables required to bring up DWC3 USB, USB PHY and HSIOMIX domain. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-04-12clk: imx8m: reduce rate table duplicationAngus Ainslie
Re-factor the imx8m[nmpq] rate tables into the common pll1416x clock driver. 43cdaa1567ad3 ("clk: imx8mm: Move 1443X/1416X PLL clock structure to common place") Signed-off-by: Angus Ainslie <angus@akkea.ca> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
2022-04-12clk: imx8mq: Add a clock driver for the imx8mqAngus Ainslie
This is a DM clock driver based off the imx8mm u-boot driver and the linux kernel driver. All of the PLLs and clocks are initialized so the subsystems below are functional and tested. 1) USB host and peripheral 2) ECSPI 3) UART 4) I2C all busses 5) USDHC for eMMC support 6) USB storage 7) GPIO 8) DRAM Signed-off-by: Angus Ainslie <angus@akkea.ca> Acked-by: Sean Anderson <seanga2@gmail.com>
2022-04-12mtd: nand: mxs_nand_spl: Remove the page aligned accessYe Li
The mxs_nand_spl driver can support to read from page unaligned offset, so don't need to set bl_len to ask spl_load_simple_fit to handle the page unaligned access. Actually spl_load_simple_fit has two parts of reading: spl_simple_fit_read and spl_load_fit_image. The spl_load_fit_image can handle the page unaligned offset, but the spl_simple_fit_read can't do it. spl_simple_fit_read requires the FIT location at page aligned offset. Hence, remove the nand_get_mtd overwrite function from mxs_nand_spl to use page unaligned read by driver. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Tim Harvey <tharvey@gateworks.com> #gw_ventana
2022-04-12driver: pwm: pwm-imx: introduce pwm_dm_imx_get_parmsTommaso Merciai
Introduce pwm_dm_imx_get_parms, dm version of pwm_imx_get_parms. This function get clock rate using clk dm api Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
2022-04-12driver: pwm: pwm-imx: get and enable per/ipg clock using dmTommaso Merciai
Get and enable ipg/per pwms clocks using dm api into imx_pwm_of_to_plat and imx_pwm_probe driver function Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
2022-04-12clk: imx8mm: add pwm clocks supportTommaso Merciai
Add clocks support for the PWM controllers. This is ported from Linux v5.17-rc8. Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
2022-04-12drivers: misc: add Gateworks System Controller driverTim Harvey
Add a driver for the Gateworks System Controller used on Gateworks boards which provides a boot watchdog, power control, temperature monitor, and voltage ADCs. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12imx8m: ddrphy_utils: Add 3732 MT/s modeMarek Vasut
Add entry for 3732 MT/s mode of operation of the LPDDR4, in which case the DDR PLL has to be configured in 933 MHz mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12pmic: pca9450: Add PCA9450C compatible stringMarek Vasut
Add DT compatible string for PCA9450C PMIC. This is a variant of the PCA9450 PMIC with 6 A dual-phase buck regulator and 3 A buck regulator, and is software-wise compatible with the PCA9450B. This variant of the PCA9450 is designed for use as companion PMIC for i.MX8MP. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-04-12ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible stringMarek Vasut
The correct compatible string for i.MX8MP variant of DWC EQoS MAC is "nxp,imx8mp-dwmac-eqos", use it. Drop the two current users of the current wrong compatible string to avoid breaking them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-12pinctrl: nxp: don't automatically select DEVRESAngus Ainslie
If we select DEVRES here then it breaks building an imx8m SPL without DEVRES support. Signed-off-by: Angus Ainslie <angus@akkea.ca>
2022-04-12crypto/fsl: i.MX8: Enable Job ring driver model.Gaurav Jain
i.MX8(QM/QXP) - added support for JR driver model. sec is initialized based on job ring information processed from device tree. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2022-04-12crypto/fsl: Add support for CAAM Job ring driver modelGaurav Jain
added device tree support for job ring driver. sec is initialized based on job ring information processed from device tree. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-11ahci: add PCI bindings for Marvell 88SE6121/45 SATA controllersHajo Noerenberg
Add AHCI PCI bindings for Marvell 88SE6121/45 SATA controllers. The 88SE6121 controller is used, for example, in the Seagate Blackarmor NAS440 or the Iomega ix4-200d NAS. As Pali Rohár explained [1], these controllers do not match the standard AHCI class code and therefore require an explizit PCI binding. The Linux kernel also uses this approach [2]. [1] https://lists.denx.de/pipermail/u-boot/2022-March/479197.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/ahci.c?h=v5.17#n557 Signed-off-by: Hajo Noerenberg <hajo-uboot@noerenberg.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-04-11mtd: Update the way partitions are parsedPatrice Chotard
In case mtd_info's dev field is not populated (raw nand's case), use the flash_node new field which reference the DT flash node where can be found "partitions" node with "fixed-partitions" compatible. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Farhan Ali <farhan.ali@broadcom.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Simon Glass <sjg@chromium.org> Cc: Wolfgang Denk <wd@denx.de>
2022-04-11mtd: Add flash_node in struct mtd_infoPatrice Chotard
Currently, add_mtd_partitions_of() can be used only if dev field of mtd_info struct is populated. It's the case, for example, for a spi nor flash, which has a DT compatible "jedec,spi-nor" and an associated device. mtd->dev is populated in spi_nor_scan(). But in case of a raw nand node, mtd_info's dev field can't be populated as flash node has no compatible, so no associated device. add_mtd_partitions_of() can't be used to parse "partitions" subnode. To remove this constraint, add an ofnode field in mtd_info struct which reference the DT flash node. This new field is populated by nand_scan_tail(). This new field will be used by add_mtd_partitions_of() to parse the flash node for "partitions" defined in DT. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Farhan Ali <farhan.ali@broadcom.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Simon Glass <sjg@chromium.org> Cc: Wolfgang Denk <wd@denx.de>
2022-04-11drivers: led: bcm6858: Set a default brightness when probing LEDsPaul HENRYS
When probing the LEDs, a default brightness is set based on settings from the U-Boot device tree, i.e. the 'default-brightness' property of the LED nodes. If that property is not present, the default maximum brightness is set. This should make sure the LED controller's registers affecting the brightness are correctly initialized and should give a consistent behaviour. Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
2022-04-11led: led_pwm: Add a driver for LEDs connected to PWMIvan Vozvakhov
Add a driver which allows to use of LEDs connected to PWM (Linux compatible). MAINTAINERS: add i.vozvakhov as a maintainer of leds-pwm C(required during new functionality adding). Signed-off-by: Ivan Vozvakhov <i.vozvakhov@corp.mail.ru>
2022-04-11tee: optee: bind rng optee driverPatrick Delaunay
In U-Boot, the discovery of TA based on its UUID on the TEE bus is not supported. This patch only binds the driver associated to the new supported OP-TEE TA = TA_HWRNG when this driver is enable. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-04-11rng: add OP-TEE based Random Number GeneratorPatrick Delaunay
Add driver for OP-TEE based Random Number Generator on ARM SoCs where hardware entropy sources are not accessible to normal world and the RNG service is provided by a HWRNG Trusted Application (TA). This driver is based on the linux driver: char/hw_random/optee-rng.c Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-06 17:04:56 +0000