| Age | Commit message (Collapse) | Author |
|---|
|
Add pinmux_property_set ops for mediatek pinctrl framework
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Signed-off-by: Vitor Sato Eschholz <vsatoes@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Tested-by: David Lechner <dlechner@baylibre.com>
|
|
Add pinctrl driver for mt8188. The driver is based on the kernel driver.
Signed-off-by: Chris-QJ Chen <chris-qj.chen@mediatek.com>
Signed-off-by: Jill.Wu <shu-yun.wu@mediatek.com>
Signed-off-by: Vitor Sato Eschholz <vsatoes@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
|
|
drivers"
Markus Schneider-Pargmann (TI.com) <msp@baylibre.com> says:
musb currently uses a wrapper driver that binds on the parent device of
the actual musb devices to manage the differentiation between gadget and
host modes. However in the upstream devicetree this parent devicetree
node can not be used to match the wrapper driver.
To be able to probe the musb devices in host/gadget mode directly, this
series introduces support for returning -ENODEV in bind functions
resulting in iterating the remaining drivers potentially binding to
other drivers that match the compatible.
Link: https://lore.kernel.org/r/20260127-topic-musb-probing-v2026-01-v4-0-ea3201e0f809@baylibre.com
|
|
The loop in lists_bind_fdt uses an indented style for log messages
within the loop and normal messages for errors that lead to the exit of
the function. Due to the change of the previous patch that adds support
for continuation on -ENODEV returned by bind, the log message should be
indented.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
|
|
Currently once a driver matched the compatible string of a device, other
drivers are ignored. If the first matching driver returns -ENODEV, no
other possibly matching drivers are iterated with that compatible of the
device. Instead the next compatible in the list of compatibles is
selected, assuming only one driver matches one compatible at a time.
To be able to use the bind function to return -ENODEV and continue
matching other drivers with the same compatible, move the for loop a bit
to continue the for loop after -ENODEV was returned. The loop had to be
adjusted a bit to still support the 'drv' argument properly. Some
simplifications were done as well.
The modification will only add additional loop iterations if -ENODEV is
returned. Otherwise the exit and continue conditions for the loop stay
the same and do not cause any additional iterations and should not
impact performance.
This is required for ti-musb-host and ti-musb-peripheral which both
match on the same device but differ based on the dr_mode DT property.
Depending on this property, the driver is either UCLASS_USB or
UCLASS_USB_GADGET_GENERIC. By checking the DT property in the bind
function and returning -ENODEV the other driver can probe instead.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Acked-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
|
|
'found' is only used at the end of the function to print a debug
message. No need to maintain a variable if we can just return 0
immediately when a driver was bound successfully.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
|
|
'result' is unused in this function, remove it.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Rename freescale to nxp
- Add CPLD support via IFC to the ls1021a-iot board
- Use scmi_clk_state_in_v2 in sandbox
|
|
The sandbox scmi clock protocol use version 3.0, so need to use
scmi_clk_state_in_v2.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
This patch renames the board directory from board/freescale to
board/nxp because NXP now provides Board Support Packages (BSPs) and
tools for the former Freescale i.MX and other i.MX products.
All relevant references have been updated accordingly. This change does
not affect functionality.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
This patch adds CPLD support via IFC to the ls1021a-iot board.
Signed-off-by: Mateus Lima Alves <mateuslima.ti@gmail.com>
|
|
Since some settings can be reused on other UFS controller (R-Car S4-8
ES1.2), add reusable functions.
Ported from Linux kernel commit
44ca16f4970e ("scsi: ufs: renesas: Add reusable functions")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/446d67b751a96645799de3aeefec539735aa78c8.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Extract specific PHY setting of the 0x10a[df] registers into a new
function.
Ported from Linux kernel commit
cca2b807c227 ("scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/110eafd1ee24f9db0285a5e2bca224e35962268a.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
After refactoring the code, ufs_renesas_reg_control() is no longer needed,
because all operations are simple and can be called directly. Remove the
ufs_renesas_reg_control() helper function, and call udelay() directly.
Ported from Linux kernel commit
855bde8ce5bc ("scsi: ufs: renesas: Remove register control helper function")
with replaced readl_poll_timeout_atomic() with readl_poll_sleep_timeout().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/69500e4c18be1ca1de360f9e797e282ffef04004.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add support for returning read register values from
ufs_renesas_reg_control(), so ufs_renesas_set_phy() can use the existing
ufs_renesas_write_phy() helper. Remove the now unused code to save to,
set, and restore from a static array inside ufs_renesas_reg_control().
Ported from Linux kernel commit
5129aa627599 ("scsi: ufs: renesas: Add register read to remove save/set/restore")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9fa240a9dc0308d6675138f8434eccb77f051650.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Since initialization of the UFS controller on R-Car S4-8 ES1.0 requires
only static values, the driver uses initialization data stored in the const
ufs_param[] array. However, other UFS controller variants (R-Car S4-8
ES1.2) require dynamic values, like those obtained from E-FUSE. Refactor
the initialization code to prepare for this.
This also reduces kernel size by almost 30 KiB.
Ported from Linux kernel commit
c4e83573c3d0 ("scsi: ufs: renesas: Replace init data by init code")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3520e27ac7ff512de6508f630eee3c1689a7c73d.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add the descriptions for the DC/DC regulators of the AXP318W, and enable
it when CONFIG_AXP318W_POWER is enabled.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
The PMIC is also known as AXP819 in vendor pmu code
For DCDC6, 8, 9, the underlying hardware support more than two levels
voltage step tuning, but for now only first two levels are implemented
in this driver, hence highest voltage will be limited at seccond level.
It actual meets board requirement in current design, and we've verified
it in Radxa Cubie A7A board.
Following are detail explanation of voltage tuning stpes for those DCDCs:
DCDC | voltage range | units | steps | implemented
6 | 0.5 - 1.2 | 10 mV | 71 | Y
. | 1.22 - 1.54 | 20 mV | 17 | Y
. | 1.8 - 2.4 | 20 mV | 31 | N
. | 2.44 - 2.76 | 40 mV | 9 | N
--------------------------------------------------
8/9 | 0.5 - 1.2 | 10 mV | 71 | Y
. | 1.22 - 1.84 | 20 mV | 32 | Y
. | 1.9 - 3.4 | 100mV | 16 | N
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
The T113-s4 SoC is using the same die as the T113-s3, but comes with
256MiB of co-packaged DRAM. Besides the doubled size, the DRAM chip
seems to be connected slightly differently, which requires to use a
different pin remapping.
Extend the DRAM initialisation code to add support for the T113-S4 aka
T113M4020DC0 by checking the SoC's CHIPID, which is stored in the first
word of the SID efuses.
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>
Tested-by: John Watts <contact@jookia.org>
Reviewed-by: John Watts <contact@jookia.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
|
- XHCI DMA bugfix
|
|
When aborting a Transfer Descriptor (TD), the xHCI driver updates the
device dequeue pointer by converting the virtual enqueue TRB pointer
into a DMA address.
Previously, the code OR-ed the ring's Dequeue Cycle State (DCS) bit into
the virtual TRB pointer before passing it to xhci_trb_virt_to_dma().
This produced an unaligned virtual address (e.g. ending in 0x...1).
Inside xhci_trb_virt_to_dma(), the offset calculation:
segment_offset = trb - seg->trbs;
operated on this unaligned pointer, resulting in an incorrect TRB index.
In wraparound cases, this caused the bounds check to fail and the
function to return 0.
As a result, a SET_DEQ_PTR command was issued with a DMA address of 0x0,
leading to controller hangs and transfer timeouts, most commonly when
aborting TDs near the end of a ring segment (e.g. index 63).
Fix this by translating the aligned virtual TRB pointer to a DMA address
first, and only then applying the DCS bit to the resulting physical
address.
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: ANANDHAKRISHNAN S <anandhakrishnan.s@dicortech.com>
|
|
A TrueType font for U-Boot should fulfill the following requirements:
* mono spaced
* support full code page 437
* easily readable
Unfortunately none of the fonts provided with U-Boot fulfills all of these
requirements.
Let's add the DejaVu Mono font. To reduce the code size the characters are
limited to code page 437.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
In sd_get_capabilities an ACMD is sent (SD_CMD_APP_SEND_SCR),
which requires sending APP_CMD (MMC_CMD_APP_CMD) before.
Currently, the ACMD is retried on error, however APP_CMD isn't.
In this case, when the ACMD fails and it is tried again,
the retry attempts will not be handled as ACMD, which is wrong.
The fix performs the retry attempts on the sequence of
APP_CMD and the ACMD together.
Signed-off-by: Yanir Levin <yanir.levin@tandemg.com>
Reviewed-by: Eran Moshe <emoshe@gsitechnology.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
The license of the file is not valid. Fix it to GPL-2.0+.
Fixes: fe11aa0b8ca3 ("mmc: sdhci-cadence: Add support for Cadence sdmmc v6")
Reported-by: Quentin Schulz <quentin.schulz@cherry.de>
Reported-by: oliver Fendt <ofendt@googlemail.com>
Closes: https://lore.kernel.org/all/CAFoF8fC4foffYJgYm9CkViET83gDu05noVRxLxgs+KWXN_-LBQ@mail.gmail.com/
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Use dev_read_u32_default() instead of dev_read_u32() to read the
"max-frequency" property from device tree. This preserves the driver-set
cfg->f_max value when the optional "max-frequency" property is not
present, ensuring the controller's default frequency is used as fallback
rather than being overwritten.
Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
If CONFIG_DM_GPIO is not enabled, compilation fails with the following
errors:
aarch64-none-linux-gnu-ld: drivers/power/regulator/regulator_common.o: in function `regulator_common_of_to_plat':
<...>/u-boot/drivers/power/regulator/regulator_common.c:30: undefined reference to `gpio_request_by_name'
aarch64-none-linux-gnu-ld: drivers/power/regulator/regulator_common.o: in function `regulator_common_get_enable':
<...>/u-boot/drivers/power/regulator/regulator_common.c:57: undefined reference to `dm_gpio_get_value'
aarch64-none-linux-gnu-ld: drivers/power/regulator/regulator_common.o: in function `regulator_common_set_enable':
<...>/u-boot/drivers/power/regulator/regulator_common.c:92: undefined reference to `dm_gpio_set_value'
make: *** [Makefile:2029: u-boot] Error 139
Since the enable gpio is optional we can conditionally skip these calls.
Reviewed-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Use dm_gpio_is_valid() helper function instead of manually checking the
gpio.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Drop the ftrace like debug() that checkpatch --strict complains about:
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Add pull-up/pull-down (PUPD) register definitions for mt8365.
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
Replace casting with long to IS_ERR_VALUE() macro to check for error
return values from rate calculation functions. This is the recommended
way to check the return value from clock rate functions.
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
Replace uclass_get_device_by_ofnode() with syscon_regmap_lookup_by_phandle()
to get the "mediatek,pctl-regmap" syscon device.
Depending on probe order, uclass_get_device_by_ofnode() may fail, but
syscon_regmap_lookup_by_phandle() has logic in it to handle that case
correctly.
The previous implementation could read more than one syscon if the
"mediatek,pctl-regmap" property had more than one phandle, but the one
board with a devicetree that does that is not supported in U-Boot yet,
so we can save that for later (it may never be needed).
Fixes: 424ceba18bfb ("pinctrl: mediatek: support mediatek,pctl-regmap property")
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
Pass the unmapped parent ID when setting parent for mux clocks.
For technical reasons, some Mediatek clock driver have a mapping between
the clock IDs used in the devicetree and ID used in the generic clock
framework.
The mtk_clk_mux_set_parent() function is comparing the passed mapped
parent ID against the unmapped IDs in the chip-specific data structures.
Before this change, we were passing the mapped parent ID. When there is
a mapping, this resulted in buggy behavior (usually just incorrectly
failing to find a match and returning an error). We need to pass the
unmapped ID of the parent clock instead for the matching to work
correctly.
Since the reverse lookup is a bit verbose, a helper function is added to
keep the code clean.
Fixes: b1358915728b ("clk: mediatek: add of_xlate ops")
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
Ignore the error return value from mtk_pinconf_bias_set_pupd_r1_r0().
The PUPD/R1/R0 registers only include a small subset of the pins, so
it is normal for this function to return an error for most pins.
Therefore, this error should not be propagated.
This fixes not all pins in a pinmux group being configured in some
cases because the propagated error caused the configuration loop to
exit early.
The rest of the function is refactored to return early on errors to
improve readability.
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
Set the size of the reg_cals arrays to PINCTRL_PIN_REG_MAX to in all
affected mediatek pinctrl drivers. This is needed to avoid potential
out-of-bounds accesses when they is used in mtk_hw_pin_field_get().
All array members need to be initialized since the code loops from 0
to PINCTRL_PIN_REG_MAX - 1. mt7622_reg_cals was already defined this
way, but the others were not.
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
David Lechner <dlechner@baylibre.com> says:
I needed to debug some clock issues and found some places where pointer
addresses were being printed when names were available. The addresses
are not very helpful, but the names are. So here a couple of patches to
improve that.
Link: https://lore.kernel.org/r/20260108-clk-uclass-better-debug-v1-0-265900a42fe5@baylibre.com
|
|
Consistently use the device name in debug messages. The clk-uclass file
previously had a mix of printing the dev pointer and the device name.
Changing all to use the device name makes the debug messages more
useful.
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
Change the format specifier from %p to %s when printing the ofnode name
so that the actual name is printed instead of the pointer address.
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
With commit 5663b137e682 ("arm: Remove edminiv2 board") the last
ARCH_ORION5X platform was removed. Remove the rest of the architecture
code which is now unused.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx/FPGA changes for v2026.04-rc1 v2
microblaze:
- Fix spl_boot_list order
versal2:
- Fix EMMC distro boot setup
- Align distro boot variables with memory layout
zynqmp-phy:
- Sync with Linux kernel driver
zynqmp:
- Add verify_auth command
- DT sync
- Add placing variables to FAT/EXT4
- Enable PCIe driver by default
pcie - xilinx-nwl:
- Fix Link down crash
ufs:
- Align clock/reset with DT binding
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYIAB0WIQSXAixArPbWpRanWW+rB/7wTvUR9QUCaW3p3wAKCRCrB/7wTvUR
# 9VkwAP4jPRALpM34VpTimNe/iwigIx8hAHxbvkUU0oJ/DW6W8AEAhCSL+ydgreuv
# kKCyNiOF1sm8IrOh4TdtMIFn37d4Dwg=
# =AkKK
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 19 Jan 2026 02:22:55 AM CST
# gpg: using EDDSA key 97022C40ACF6D6A516A7596FAB07FEF04EF511F5
# gpg: Can't check signature: No public key
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/29031
- Fix interrupt storms in Linux on the imx93_frdm board.
- Defconfig update for tqma6 board.
- Miscellaneous cleanups/improvements for imx93_evk.
- Allow booting from both USB controlles on i.MX6 DHSOM.
- Handle third MAC address for SMARC i.MX95
|
|
On GDET enabled part, need to call voltage change start and finish
APIs when adjust the voltage more than 100mv. Otherwise GDET will be
triggered and system is reset
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
- Add the "apple,t8103-dwc3" compatible to the xhci-dwc3 glue
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon
We have been getting a lot more patches from Qualcomm engineers, largely
focusing on IoT, router, and automotive platforms (those with QCS, IPQ,
and SA prefixes specifically).
Quite a variety of changes here:
- Watchdog overflow fix
- Hardcoded fastboot buffer addresses for a few board (hoppefully
temporary until fastboot is updated to read $fastboot_addr_r)
- Enable memory protection (MMU_MGPROT) for ARCH_SNAPDRAGON
- pinctrl support for the QCS615 soc
- various USB/phy fixes including phy config for msm8996/qcs615
- mmc and i2c clock configuration fixes
- significant fixes for rpmh and regulator drivers
- added config fragment for pixel devices
- sa8775p clock fixes
- support for "flattened" dwc3 DT that recently landed upstream for
sc7280 (qcs6490) and a few other platforms
|
|
Qualcomm devicetrees are moving away from having a glue node with dwc3
as a subnode and now may just have a single flattened node.
Rockchip already have a glue_get_ctrl_dev op which returns the node for
the glue device itself, commonise this and reuse it for the new Qualcomm
node.
Lastly adjust the qscratch base address since it now requires an offset
from the dwc3 base.
Link: https://patch.msgid.link/20260116-casey-usb-role-switch-v2-1-83a1a6501a11@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20260116
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/29018
Android:
* Fix missing dependency for BOOTMETH_ANDROID
* Add bootconfig support
* Add 'get ramdisk' command to abootimg
DFU:
* Improve error handling in dfu_fill_entity()
USB Gadget:
* ci_udc: Ensure ci_ep->desc is valid before using it
* ci_udc: Add additional debug prints
|
|
Markus Schneider-Pargmann (TI.com) <msp@baylibre.com> says:
This series adds the capability to define hardcoded panel settings to
the simple_panel driver similar to the Linux Kernel and adds the panel
used on am335x evm. panel-uclass.c is extended to support get_modes()
for panels and drm_display_mode conversion. In a second step the tilcdc
is extended to support OF graph to be able to connect to the simple
panel devicetree node.
Link: https://lore.kernel.org/r/20260105-topic-am33-evm-lcd-v2026-01-v4-0-7617591b8159@baylibre.com
|
|
Add support for OF graph parsing. When using OF graph the default
tilcdc_panel_info is used which is the same as defined in Linux.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
|
|
Add timing data for tfc_s9700rtwv43tr_01b from Linux to the simple-panel
driver. To support hardcoded timing data as Linux does, add a new struct
simple_panel_drv_data which holds a struct display_timing pointer as
well. The hardcoded timing data is preferred over DT parsing.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
|
|
Linux uses get_modes() to fetch all available panel modes from the
driver. This is also used to fetch the modes from Linux's simple panel
implementation where a list of drm_display_mode structs is used to
define the different possible panels.
To make our work easier, create a compatible way of fetching and
defining these modes in u-boot. get_modes() fetches the available modes
from the panel driver. The get_display_timing() call maps the
drm_display_mode properties to the display_timing struct. This call now
uses whatever panel operation is available, get_display_timing() or
get_modes().
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
|
|
The Linux support for dwc3 on Apple silicon SoCs switched to using a
apple specific glue driver [1] that uses it own compatible string. The
glue driver handles platform specific requirements on the interaction
between dwc3 and the USB2/USB3 PHY and reset-controller for USB role
switches and plug events.
To keep USB working as before when the nodes still carried "snps,dwc3"
as compatible add "apple,t8103-dwc3" to the of match table. Eventually
it is probably advisable to add a dwc3-apple glue driver and write code
for the currently empty Apple Type-C PHY driver in phy-apple-atc.c.
Link: https://lore.kernel.org/asahi/20251015-b4-aplpe-dwc3-v2-0-cbd65a2d511a@kernel.org/ [1]
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Janne Grunau <j@jannau.net>
|
