| Age | Commit message (Collapse) | Author |
|---|
|
The devm alloc functions that we have may follow the Linux kernel model
where allocations are (almost always) automatically free()'d. However,
quite often we don't enable, in full U-Boot, the tracking and free()'ing
functionality. This in turn leads to memory leaks because the driver
author expects that since the functions have the same name as in the
Linux Kernel they have the same behavior. In turn we then get
functionally correct commits such as commit 00e1fed93c8c ("firmware:
ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource") that manually
add these calls. Rather than manually tracking allocations and
implementing free()s, rework things so that we follow expectations by
enabling the DEVRES functionality (outside of xPL phases).
This turns DEVRES from a prompted symbol to a symbol that must be
select'd, and we now remove our non-managed alloc/free functions from
outside of xPL builds.
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Prepare v2026.01-rc3
|
|
Let's introduce the Generic System Interconnect subsystem based on
the counterpart Linux framework which is used to vote for bandwidth
across multiple SoC busses.
Documentation for the Linux Generic System Interconnect Subsystem can
be found at [1].
Each bus endpoints are materialised as "nodes" which are linked together,
and the DT will specify a pair of nodes to enable and set a bandwidth
on the route between those endpoints.
The hardware resources that provide those nodes and provides the way
to vote for the bandwidth are called "providers".
The Interconnect uclass code is heavily based on the Linux one, with
some small differences:
- nodes are allocated as udevices instead of Linux idr_alloc()
- tag management is minimal, only normal xlate is supported
- getting nodes states at probe is not implemented
- providers are probed on demand while the nodes links are traversed
- nodes are populated on bind
- id management is simplified, static IDs and dynamics IDs can be used
- identical consume API as Linux, only implementation differs
Fully tested with associated DM test suite.
[1] https://docs.kernel.org/driver-api/interconnect.html
Link: https://patch.msgid.link/20251120-topic-interconnect-next-v5-1-e8a82720da5d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
%s/programmaticaly/programmatically/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
Introduce UCLASS-based extension board support to enable more
standardized and automatic loading of extension board device tree
overlays in preparation for integration with bootstd and pxe_utils.
Several #if CONFIG_IS_ENABLED are used in cmd/extension_board.c to ease the
development but don't worry they are removed later in the series.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add i3c general uclass id.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
|
|
uclass_find_next_device always returns 0, so instead make it a void and
update calling sites.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
|
|
Create a basic framework for a group of devices that perform AES
cryptographic operations.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
dev_read_s32_default is for getting an s32 from a Device Tree property
and allows to take a default value if that property is missing.
Considering it calls ofnode_read_u32_default which takes a u32 and
returns a u32, it should do the same instead of using an int, especially
considering that int size is typically architecture-specific, as opposed
to s32/u32.
s32 and u32 being the same size, dev_read_s32* functions calling
ofnode_read_u32_default shouldn't be an issue (at the type level at
least) as the information will be stored appropriately in 4B regardless
of the sign.
This incidentally matches all other dev_read_*_default functions.
Fixes: a1b17e4f4c82 ("dm: core: Add a function to read into a unsigned int")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
dev_read_u32_default is for getting a u32 from a Device Tree property
and allows to take a default value if that property is missing.
Considering it calls ofnode_read_u32_default which takes a u32 and
returns a u32, it should do the same instead of using an int, especially
considering that int size is typically architecture-specific, as opposed
to u32.
This incidentally matches all other dev_read_*_default functions (except
dev_read_s32_default which will be tackled in the next commit).
Fixes: 47a0fd3bad38 ("dm: core: Implement live tree 'read' functions")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
There are already several helpers to find a udevice based on its
position in a device tree, like getting a child or a node pointed by a
phandle, but there was no support for graph endpoints, which are very
common in display pipelines.
Add a new helper, named uclass_get_device_by_endpoint() which enters the
child graph reprensentation, looks for a specific port, then follows the
remote endpoint, and finally retrieves the first parent of the given
uclass_id.
This is a very handy and straightforward way to get a bridge or a panel
handle.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Caleb Connolly <caleb.connolly@linaro.org> says:
In Simon's series reworking autoprobe, a discussion came up about
DM_FLAG_PROBE_AFTER_BIND, specifically that it wasn't very clear where
this flag should be used.
This series implements my suggestions made there to clarify the use of
this flag, and fixup the two driver which erroneously apply it to their
driver struct (this does nothing).
Link: https://lore.kernel.org/u-boot/20241120153642.861633-1-sjg@chromium.org/
Link: https://lore.kernel.org/r/20250117-clarify-probe-after-bind-v1-0-273f046ce5dd@linaro.org
|
|
The DM_FLAG_PROBE_AFTER_BIND flag only makes sense on a per-device
basis, however recently added documentation as well as some confused
drivers imply that it might be added to a driver definition, this does
nothing.
Clarify the new documentation and expand on the comment by the
definition to point people in the right direction.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@amd.com>
|
|
Depending on the platform, there may be multiple clock sources
required to enable a UART. Use the bulk functions to get and
enable the clocks when the UART probes. This can facilitate
the removal of functions to manually enable the clock.
This is made dependent on CLK_CCF which is used on imx6q,
imx8m[mnqp], several imxrt, imx9. If/when the UART clock
registration is done for older boards, this limitation
could be updated.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
Add a mostly complete list of ofnode analogs of of_graph
parsing helpers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Simon Glass <sjg@chromium.org> says:
The current method of running unit tests relies on subcommands of the
ut command. Only the code in each subcommand knows how to find the tests
related to that subcomand.
This is not ideal and we now have quite a few subcommands which do
nothing but locate the relevant tests in a linker list, then call a
common function to run them.
This series adds a list of test suites, so that these subcommands can be
removed.
An issue with 'ut all' is that it doesn't record how many tests failed
overall, so it is necessary to examine copious amounts of output to look
for failures. This series adds a new 'total' feature allow recording the
total number of failed tests.
To help with 'ut all' a new pytest is created which runs it (as well as
'ut info') and makes sure that all is well. Due to the 'ut all' failures
this does not pass, so the test is disabled for now. It is here because
it provides security against misnaming a test suite and causing it not
to run.
Future work may:
- get 'ut all' passing
- enable test_suite() in CL, to ensure that 'ut all' keeps passing
- record duration of each suite
- allow running the tests in random order to tease out dependencies
- tweak the output to remove common prefixes
- getting rid of bootstd, optee and seame 'ut' subcommands
Link: https://lore.kernel.org/r/20250120212613.516664-1-sjg@chromium.org
|
|
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Simon Glass <sjg@chromium.org> says:
The current UPL spec[1] has been tidied up and improved over the last
year, since U-Boot's original UPL support was written.
This series includes some prerequisite patches needed for the real UPL
patches. It is split from [2]
[1] https://github.com/UniversalPayload/spec/tree/3f1450d
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=438574&state=*
Link: https://lore.kernel.org/r/20250111000029.245022-1-sjg@chromium.org
|
|
The ofnode_find_subnode() function currently processes things two
different ways, so the treatment of unit addresses differs depending on
whether OF_LIVE is enabled or not.
Add a new version which uses the ofnode API and add a test to check that
unit addresses can be matched correctly. Leave the old function in place
for the !OF_LIVE case, to avoid a code-size increase, e.g. on
firefly-rk3288
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
When a unit-address is provided, use it to match against the node
name.
Since this increases code size, put it into a separate function.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This function is somewhat ambiguous, so expand the comments and add a
test for the undefined behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This function allocates memory for the node name, so mention this in the
function comment.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Rather than doing autoprobe within the driver model code, move it out to
the board-init code. This makes it clear that it is a separate step from
binding devices.
For now this is always done twice, before and after relocation, but we
should discuss whether it might be possible to drop the post-relocation
probe.
For boards with SPL, the autoprobe is still done there as well.
Note that with this change, autoprobe happens after the
EVT_DM_POST_INIT_R/F events are sent, rather than before.
Link: https://lore.kernel.org/u-boot/20240626235717.272219-1-marex@denx.de/
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
implementation"
Christian Marangi <ansuelsmth@gmail.com> says:
This series is split in 2 part.
While adapting the LED boot and activity code to the new property
accepted by Rob in dt-schema repository, a big BUG was discovered.
The reason wasn't clear at start and took me some days to figure it
out.
This was triggered by adding a new phandle in the test.dts to
introduce test for the new OPs.
This single addition caused the sandbox CI test to fail in the
dm_test_ofnode_phandle_ot test.
This doesn't make sense as reverting the change made the CI test
to correctly finish. Also moving the uboot node down
after the first phandle (in test.dts the gpio one) also made
the CI test to correctly finish.
A little bit of searching and debugging made me realize the
parse phandle OPs didn't support other.dts at all and they
were still referencing phandle index from test.dts.
(more info in the related commit)
In short the test was broken all along and was working by
pure luck. The first 4 patch address and fix the problem for good.
The other 4 patch expand and address the property change for
LED boot/activity.
Posting in a single series as changes are trivial and just
to speedup review process. (and also because the second
part depends on the first)
All CI tested with azure pipeline.
Link: https://lore.kernel.org/r/20241110115054.2555-1-ansuelsmth@gmail.com
|
|
Implement ofnode_options phandle helper to get an ofnode from a phandle
option in /options/u-boot.
This helper can be useful since new DT yaml usually require to link a
phandle of a node instead of referencing it by name or other indirect
way.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Implement ofnode/tree_parse_phandle() helper as an equivalent of
of_parse_phandle to handle simple single value phandle.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Implement oftree variant of parse_phandle OPs.
There is currently a very hidden and laten BUG with parse_phandle OPs
that doesn't permit the support of multiple DTS in a system. One usage
example if sandbox with the usage of other.dts
The BUG is only present on live scenario where of_... OPs are used and
it's not present when fdt... OPs are used.
This is caused by an assumption made in __of_parse_phandle_with_args,
with the of_find_node_by_phandle call that pass the first arg as NULL.
This makes of_find_node_by_phandle use the default root node of the
system and doesn't permit the usage of alternative tree. This is correct
for normal system and also for the linux kernel where it's assumed a
single device tree.
It's problematic if other device tree needs to be used.
To fix this, introduce __of_root_parse_phandle_with_args to define a
root device tree for of_find_node_by_phandle.
Introduce all the variant OPs for this and in ofnode, the oftree OPs
following how it's done for other OPs with similar task.
For FDT scenario, ofnode_from_fdtdec_phandle_args is reworked to accept
a new variable, node and noffset_to_ofnode is used instead of
offset_to_ofnode. This is required to support multiple FDB blob to
calculate the correct of_offset of the ofnode.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This replaces dm_remove_devices_flags() calls in all boot
implementations to ensure non vital devices are consistently removed
first. All boot implementation except arch/arm/lib/bootm.c currently
just call dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL). This can result
in crashes when dependencies between devices exists. The driver model's
design document describes DM_FLAG_VITAL as "indicates that the device is
'vital' to the operation of other devices". Device removal at boot
should follow this.
Instead of adding dm_remove_devices_flags() with (DM_REMOVE_ACTIVE_ALL |
DM_REMOVE_NON_VITAL) everywhere add dm_remove_devices_active() which
does this.
Fixes a NULL pointer deref in the apple dart IOMMU driver during EFI
boot. The xhci-pci (driver which depends on the IOMMU to work) removes
its mapping on removal. This explodes when the IOMMU device was removed
first.
dm_remove_devices_flags() is kept since it is used for testing of
device_remove() calls in dm.
Signed-off-by: Janne Grunau <j@jannau.net>
|
|
All the uclass functions for finding a device end up creating a uclass
if it doesn't exist. Add a function which instead returns NULL in this
case.
This is useful when in the 'unbind' path, since we don't want to undo
any unbinding which has already happened.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Patrick Rudolph <patrick.rudolph@9elements.com> says:
Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Link: https://lore.kernel.org/r/20241023132116.970117-1-patrick.rudolph@9elements.com
|
|
Add a new method to acpi_ops to let drivers fill out ACPI MADT.
The code is unused for now until drivers implement the new ops.
TEST: Booted on QEMU sbsa using driver model generated MADT.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
|
|
This adds TCPM framework in preparation for fusb302 support, which can
handle USB power delivery messages. This is needed to solve issues with
devices, that are running from a USB-C port supporting USB-PD, but not
having a battery.
Such a device currently boots to the kernel without interacting with
the power-supply at all. If there are no USB-PD message replies within
5 seconds, the power-supply assumes the peripheral is not capable of
USB-PD. It usually takes more than 5 seconds for the system to reach
the kernel and probe the I2C based fusb302 chip driver. Thus the
system always runs into this state. The power-supply's solution to
fix this error state is a hard reset, which involves removing the
power from VBUS. Boards without a battery (or huge capacitors) will
reset at this point resulting in a boot loop.
This imports the TCPM framework from the kernel. The porting has
originally been done by Rockchip using hardware timers and the Linux
kernel's TCPM code from some years ago.
I had a look at upgrading to the latest TCPM kernel code, but that
beast became a lot more complex due to adding more USB-C features.
I believe these features are not needed in U-Boot and with multiple
kthreads and hrtimers being involved it is non-trivial to port them.
Instead I worked on stripping down features from the Rockchip port
to an even more basic level. Also the TCPM code has been reworked
to avoid complete use of any timers (Rockchip used SoC specific
hardware timers + IRQ to implement delayed work mechanism). Instead
the delayed state changes are handled directly from the poll loop.
Note, that (in contrast to the original Rockchip port) the state
machine has the same hard reset quirk, that the kernel has - i.e.
it avoids disabling the CC pin resistors for devices that are not
self-powered. Without that quirk, the Radxa Rock 5B will not just
end up doing a machine reset when a hard reset is triggered, but will
not even recover, because the CPU will loose power and the FUSB302
will keep this state because of leak voltage arriving through the RX
serial pin (assuming a serial adapter is connected).
This also includes a 'tcpm' command, which can be used to get
information about the current state and the negotiated voltage
and current.
Co-developed-by: Wang Jie <dave.wang@rock-chips.com>
Signed-off-by: Wang Jie <dave.wang@rock-chips.com>
Tested-by: Soeren Moch <smoch@web.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Implement ofnode_options helpers to read options in /options/u-boot to
adapt to the new way to declare options as described in [1].
[1] dtschema/schemas/options/u-boot.yaml
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The _REC suffix doesn't add much. Really what we want to know is whether
the test uses the console, so rename this flag.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
The UT_TESTF_ macros read as 'unit test test flags' which is not right.
Rename to UTF ('unit test flags').
This has the benefit of being shorter, which helps keep UNIT_TEST()
declarations on a single line.
Give the enum a name and reference it from the UNIT_TEST() macros while
we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The linux kernel has the list_count_nodes() API functions which is
used for counting nodes of a list. This has now been imported in
U-Boot as part of an earlier commit. Use this function and drop the
list_count_items().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This follows the example of RISC-V where <asm/global_data.h> includes
<asm/u-boot.h> directly as "gd" includes a reference to bd_info already
and so the first must include the second anyhow. We then remove
<asm/u-boot.h> from all of the places which include references to "gd"
an so have <asm/global_data.h> already.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from all "test/" files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
These headers follow the pattern:
| #if CONFIG_IS_ENABLED(FANCY_FEATURE)
| void foo(void);
| #else
| static inline void foo(void) { return -ENOSYS; }
| #endif
In the #else path ENOSYS is used, however linux/errno.h is not included.
If errno.h has not been included already the compiler errors out even
if the inline function is not referenced.
Make those headers self contained.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
CONFIG_DM_WARN has a text indicating that these messages should only
provided when debugging. This implies that the setting must be default no.
We should still create debug messages.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The baudrate configured in .config is taken by default by serial. If
change of baudrate is required then the .config needs to changed and
u-boot recompilation is required or the u-boot environment needs to be
updated.
To avoid this, support is added to fetch the baudrate directly from the
device tree file and update.
The serial, prints the log with the configured baudrate in the dtb.
The commit c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for
$fdtfile env variable") is taken as reference for changing the default
environment variable.
The default environment stores the default baudrate value, When default
baudrate and dtb baudrate are not same glitches are seen on the serial.
So, the environment also needs to be updated with the dtb baudrate to
avoid the glitches on the serial.
Also add test to cover this new function.
Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230921112043.3144726-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Prepare a rkmtd UCLASS in use for writing Rockchip boot blocks
in combination with existing userspace tools and rockusb command.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic
- add Amlogic A1 clock driver
- add Amlogic A1 reset support
- add USB Device support for Amlogic A1
- enable RNG on Amlogic A1 & Amlogic S4
- move Amlogic Secure Monitor to standalone driver
|
|
At the moment, we don't have a common API for working with
SM, only the smc_call() function. This approach is not generic
and difficult to configure and maintain.
This patch adds UCLASS_SM with the generic API:
- sm_call()
- sm_call_write()
- sm_call_read()
These functions operate with struct pt_regs, which describes
Secure Monitor arguments.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230921081346.22157-2-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dm
improvements with dev_read_addr_..._ptr()
scan all entries in multi-device boot_targets
EFI empty-capsule support
|
|
SCMI base protocol is mandatory according to the SCMI specification.
With this patch, SCMI base protocol can be accessed via SCMI transport
layers. All the commands, except SCMI_BASE_NOTIFY_ERRORS, are supported.
This is because U-Boot doesn't support interrupts and the current transport
layers are not able to handle asynchronous messages properly.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
|
