summaryrefslogtreecommitdiff
path: root/include/dt-bindings/net
AgeCommit message (Collapse)Author
2025-06-06include/dt-bindings: Remove functionally identical headersTom Rini
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings headers we have a number of these headers that are in our include directory and differ only in combinations of spacing changes and/or switching to SPDX license tags. We can safely remove the copies under include/dt-bindings now to prevent future conflicts. Signed-off-by: Tom Rini <trini@konsulko.com>
2025-06-06include/dt-bindings: Remove identical headersTom Rini
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings headers we have a number of these headers that are in our include directory and are currently identical to the versions in dts/upstream. We can remove these now to prevent future conflicts. Signed-off-by: Tom Rini <trini@konsulko.com>
2025-06-06include/dt-bindings: Remove unused headersTom Rini
As part of moving to using OF_UPSTREAM and so the upstream dt-bindings headers we have a number of these headers that are in our include directory and not referenced by any code outside of dts/upstream. We can remove these now to prevent future conflicts. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-07dt-bindings: Remove VSC8531 specific RGMII delay definitionsMichal Simek
Based on Linux upstream discussion value enumeration shouldn't be used. Instead of it delay in pS should be used that's why remove it from the header. Link: https://lore.kernel.org/all/YNsm%2F0dmpBgO8mqr@lunn.ch/ Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/bbd343474856a67252f3b31d22b3b5a80ad04043.1698851109.git.michal.simek@amd.com
2022-01-15net: phy: add TI DP83869HM ethernet driverDominic Rath
This driver is based on an older downstream TI kernel, with changes and cleanups to work with mainline device-tree bindings. Signed-off-by: Dominic Rath <rath@ibv-augsburg.net> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-10-03arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14Tom Rini
This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-23include: dt-bindings: Add MSCC headerHarini Katakam
Add MSCC header with delay definitions for VSC8531 and associated family devices. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-07phy: atheros: add device tree bindings and configMichael Walle
Add support for configuring the CLK_25M pin as well as the RGMII I/O voltage by the device tree. By default the AT803x PHYs outputs the 25MHz clock of the XTAL input. But this output can also be changed by software to other frequencies. This commit introduces a generic way to configure this output. Also the PHY supports different RGMII I/O voltages: 1.5V, 1.8V and 2.5V. An internal LDO is able to provide 1.5V (default) and 1.8V. The 2.5V option needs an external supply voltage. This commit adds support to switch the internal LDO to 1.8V. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09dt-bindings: phy: dp83867: Add documentation for disabling clock outputGrygorii Strashko
Based on commit 980066e6d964 ("dt-bindings: phy: dp83867: Add documentation for disabling clock output") of mainline linux kernel. The clock output is generally only used for testing and development and not used to daisy-chain PHYs. It's just a source of RF noise afterward. Add a mux value for "off". I've added it as another enumeration to the output property. In the actual PHY, the mux and the output enable are independently controllable. However, it doesn't seem useful to be able to describe the mux setting when the output is disabled. Document that PHY's default setting will be left as is if the property is omitted. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-12fdt: update bcm283x device tree sources to Linux 5.1-rc6 stateHeinrich Schuchardt
Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2018-10-10net: phy: ti: Add binding for the CLK_OUT pin muxingJanine Hagemann
The DP83867 has a muxing option for the CLK_OUT pin. It is possible to set CLK_OUT for different channels. Create a binding to select a specific clock for CLK_OUT pin. Based on commit 9708fb630d19 ("net: phy: dp83867: Add binding for the CLK_OUT pin muxing option") of mainline linux kernel. Signed-off-by: Janine Hagemann <j.hagemann@phytec.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-24net: phy: dp83867: Add device tree bindings and documentationDan Murphy
Add the device tree bindings and the accompanying documentation for the TI DP83867 Giga bit ethernet phy driver. The original document was from: [commit 2a10154abcb75ad0d7b6bfea6210ac743ec60897 from the Linux kernel] Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>