| Age | Commit message (Collapse) | Author |
|---|
|
Taking a goto to out_of_resources before receive_lengths is assigned
will result in an attempt to free an unitialised pointer. Instead
initialise receive_lengths to NULL on declaration to prevent this from
occurring.
This issue was found by Smatch.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Tom Rini <trini@konsulko.com> says:
Hey all,
This is a v3 of Simon's series[1] and depends on the series[2] I posted
the other day that removes <env.h> from <command.h>. With this series
done, I believe we've tackled all of the current cases of headers which
include <env.h> without directly needing it. Much of this series is in
fact Simon's v2 with the main differneces being:
- Removing <env.h> from <net.h> at the end
- Removing env_to_ip() given how little it's used rather than shuffling
around where it's declared and un-inline'ing it. For a rarely used
helper, this ends up being cleaner I think. Especially looking at some
of the users (which called env_get repeatedly). If there's strong
opinion here about using the other method[3] we can do that instead.
- Setting aside for now how to handle CMD_ELF=y and NO_NET=y because
today it's actually fine as we unconditionally build lib/net_utils.c
where string_to_ip() is defined. I'm unsure if a further series is
warranted here or not. We rely on link-time optimization to keep code
readable too.
[1]: https://lore.kernel.org/all/20250501010456.3930701-1-sjg@chromium.org
[2]: https://lore.kernel.org/all/20250514225002.15361-1-trini@konsulko.com
[3]: https://lore.kernel.org/all/20250501010456.3930701-23-sjg@chromium.org
Link: https://lore.kernel.org/r/20250515234154.1859366-1-trini@konsulko.com
|
|
Now that env_get_ip() has been removed, the include file <net.h> does
not need anything from <env.h>. Furthermore, include/env.h itself
includes other headers which can lead to longer indirect inclusion
paths. To prepare to remove <env.h> from <net.h> fix all of the
remaining places which had relied on this indirect inclusion to instead
include <env.h> directly.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> # net/lwip
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
These functions are useful for the EFI app. As a first step towards
making these available outside lib/efi_loader, create a separate header
file and include it where needed. Add proper comments to the functions,
since many are missing at present.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Functions called from EFI applications should not do console output.
Refactor the wget code to implement this requirement. The wget_http_info
struct is used to hold the boolean that signifies whether the output is
allowed or not.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Add support for multiple efi_net_obj structs in efi_net.c. This comes
in preparation for an EFI network driver supporting multiple network
interfaces. For now the EFI network stack still registers a single ethernet
udevice as an EFI network device even if multiple are present, namely
the one that was the current device at the moment of EFI initialization.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
Add a dhcp cache to store the DHCP ACKs received by the U-Boot network
stack.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
In preparation to support mutiple efi net udevices. Add a device path
cache to support device paths from multiple ethernet udevices.
The device paths can be added to the cache before EFI gets initialized and
the protocols get installed.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
In preparation to support multiple EFI net objects, support
constructing device paths using an ethernet device different
than the default. Add a udevice argument to the device path
generation, and keep the callsites with eth_get_dev() to
preserve existing functionality.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
This gets called each time a payload is to get executed by bootefi.
For now this only updates the PXE IP address.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
The following symbols are exposed:
- efi_reinstall_protocol_interface
This is done so that the device path protocol interface
of the network device can be changed internally by u-boot
when a new bootfile gets downloaded.
- eth_set_dev
To support multiple network udevices
- efi_close_event
This comes in preparation to support unregistering
an EFI network device from the EFI network stack when
the underlying U-boot device gets removed
- efi_[dis]connect_controller
The EFI network driver uses ConnectController to add a
NIC to the EFI network stack.
- efi_uninstall_protocol_interface
connect_controler for the efi network driver can install
protocols, which need to be uninstalled in disconnect_controller
- EFI_SIMPLE_NETWORK_PROTOCOL_GUID
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54e8 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
The log category should be LOGC_EFI all over the EFI sub-system.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add an EFI HTTP driver. This commit implements the
EFI_HTTP_PROTOCOL and the EFI_HTTP_SERVICE_BINDING_PROTOCOL.
The latter is attached to the handle of th efi network
device. This is the same handle where snp, pxe, and ipconfig
are attached to.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
|
|
Add an implementation of the EFI_IP4_CONFIG2_PROTOCOL. The protocol
is attached to the handle of the efi network device. This is the same
handle where snp and pxe are attached to.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
|
|
Add network-stack agnostic way to send an http request and
parse http headers from efi drivers. This uses wget as a
backend and communicates with it via efi_wget_info.
The function efi_net_do_request allocates a buffer on behalf of an
efi application using efi_alloc and passes it to wget to receive
the data. If the method is GET and the buffer is too small, it
re-allocates the buffer based on the last received Content-Length
header and tries again. If the method is HEAD it just issues one
request. So issuing a HEAD request (to update Content-Length) and
then a GET request is preferred but not required.
The function efi_net_parse_headers parses a raw buffer containing
an http header into an array of EFI specific 'http_header' structs.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Set the device path of the efi boot device to an HTTP device path
(as formed by efi_dp_from_http) when the next boot stage is loaded
using wget (i.e., when wget is used with wget_info.set_bootdev=1).
When loaded from HTTP, the device path should account for it so that
the next boot stage is aware (e.g. grub only loads its http stack if
it itself was loaded from http, and it checks this from its device path).
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Add the functions efi_net_set_addr and efi_net_get_addr to set
and get the ip address from efi code in a network agnostic way.
This could also go in net_common, or be compiled conditionally
for each network stack.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
We largely do not need <common.h> in these files, so drop it. The only
exception here is that efi_freestanding.c needs <linux/types.h> and had
been getting that via <common.h>.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The dhcp command may be executed after the first UEFI command.
We should still update the EFI_PXE_BASE_CODE_PROTOCOL.
Don't leak content of prior acknowledge packages.
Handle failing allocation when calling malloc().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
With DM enabled the ethernet code will receive a packet, call
the push method that's set by the EFI network implementation
and then free the packet. Unfortunately the push methods only
sets a flag that the packet needs to be handled, but the code
that provides the packet to an EFI application runs after the
packet has already been freed.
To rectify this issue, adjust the push method to accept the packet
and store it in a temporary buffer. The EFI application then gets
the data copied from that buffer. This way the packet is cached
until is is needed.
The DM Ethernet stack tries to receive 32 packets at once, thus
we better allocate as many buffers as the stack.
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.
Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add some more files to the UEFI API documentation.
Correct some Sphinx comments.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Implement the MCastIPtoMAC service of the simple network protocol.
It converts an multicast IPv4 (or IPv6) address to a multicast Ethernet
address.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
The network should start in status EfiSimpleNetworkStopped.
Add and correct status checks in the simple network protocol.
Correct the unit test:
* Shutdown() and Stop() during setup if needed
* invoke Shutdown() before Stop() when tearing down
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Fill the media header in EFI_SIMPLE_NETWORK.Transmit().
Check that the buffer size is large enough for the header.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
GetStatus() must clear the interrupt status.
Transmit() should set the TX interrupt.
Receive() should clear the RX interrupt.
Initialize() and Start() should clear the interrupt status.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
U-Boot implements the EFI_PXE_BASE_CODE_PROTOCOL because GRUB uses the mode
information for booting via PXE. All function pointers in the protocol were
NULL up to now which will cause immediate crashes when the services of the
protocol are called.
Create function stubs for all services of the protocol returning
EFI_UNSUPPORTED.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Check buffer pointers are not NULL as required by the UEFI 2.7 spec.
Return EFI_UNSUPPORTED instead of EFI_INVALID_PARAMETER when trying to
transmit with non-zero header_size.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
We should consistently use the same name for protocol GUIDs as defined in
the UEFI specification. Not adhering to this rule has led to duplicate
definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID.
Adjust misnamed protocol GUIDs.
Adjust the text for the graphics output protocol in the output of the
`efidebug dh` command.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
We should not call eth_rx() before the network interface is initialized.
The services of the simple network protocol should check the state of
the network adapter.
Add and correct comments.
Without this patch i.mx6 system Wandboard Quad rev B1 fails to execute
bootefi selftest.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Calling net_send_packet() requires that the buffer is aligned to a multiple
of PKTALIGN (= ARCH_DMA_MINALIGN). The UEFI spec does not require
efi_net_transmit() to be called with a buffer with any special alignment.
So we have to copy to an aligned buffer. The current coding copies to an
aligned buffer only if CONFIG_EFI_LOADER_BOUNCE_BUFFER=y. Many boards
like the Odroid C2 do not use a bounce buffer.
With the patch we copy to a correctly aligned buffer in all cases.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Fix typos in EFI subsystem comments.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Rename the component parent of some EFI objects to header. This avoids
misunderstandings.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
A pointer to a struct efi_object is a handle. We do not need any handle
member in this structure. Let's eliminate it.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Remove superfluous include.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
In int-ll64.h, we always use the following typedefs:
typedef unsigned int u32;
typedef unsigned long uintptr_t;
typedef unsigned long long u64;
This does not need to match to the compiler's <inttypes.h>.
Do not include it.
The use of PRI* makes the code super-ugly. You can simply use
"l" for printing uintptr_t, "ll" for u64, and no modifier for u32.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
if_type is not correctly initialized
Failure to initialize if_type means that grub2/efinet sends
a bogus arp request. It therefore gets no response. On Raspberry Pi 3B+
this leads to a pause at:
lan78xx_eth Waiting for PHY auto negotiation to complete....... done
lan78xx_eth Waiting for PHY auto negotiation to complete....... done
Signed-off-by: Andrew Thomas <andrew.thomas@oracle.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
|
|
As part of the main conversion a few files were missed. These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict. This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.
Fixes: 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Add missing network initialization code.
Before the patch the network was only usable if a network command like
dhcp or tftp had beed executed.
This was visible when interrupting the console countdown and executing
bootefi selftest for vexpress_ca15_tc2_defconfig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We use a timer to poll the network.
iPXE is used for booting from iSCSI drives. It has been changed to run at
TPL_CALLBACK most of the time (which is not what the UEFI spec
recommends).
By changing our timer to TPL_NOTIFY we can ensure that it is nevertheless
executed.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
If an event of a group event is signaled all other events of the same
group are signaled too.
Function efi_signal_event is renamed to efi_queue_event.
A new function efi_signal_event is introduced that checks if an event
belongs to a group and than signals all events of the group.
Event group notifciation is implemented for ExitBootServices,
InstallConfigurationTable, and ResetSystem.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Consistently return status codes form efi_net_register().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
To avoid duplicate coding provide a helper function that
initializes an EFI object and adds it to the EFI object
list.
efi_exit() is the only place where we dereference a handle
to obtain a protocol interface. Add a comment to the function.
Suggested-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Use efi_add_protocol to add protocols.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Calloc may return NULL. So we must check the return value.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
In the receive function all return values should be filled.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The size fields in the Simple Network Protocol are all
UINTN in the UEFI spec. So use size_t.
Provide a function description of the receive function.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
