| Age | Commit message (Collapse) | Author |
|---|
|
Add new etype which generates the Renesas R-Car Gen4 SA0 header.
This header is placed at the beginning of SPI NOR and describes
where should data from SPI NOR offset 0x40000 be loaded to, and
how much data should be loaded there. In case of U-Boot, this is
used to load SPL and possibly other payload(s) into RT-VRAM.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
key-name-hint in signature nodes"
Quentin Schulz <foss+uboot@0leil.net> says:
I misunderstood the documentation and put the signing key in a keys/
directory while setting key-name-hint property in the signature node and
u-boot-spl-pubkey-dtb to a path.
mkimage doesn't fail if it cannot find the public key when signing a
FIT but returns something on stderr to notify the user it couldn't find
the key. The issue is that bintool currently discards stderr if the
command successfully returns, so the FIT is not signed AND the user
isn't made aware of it unless the image is manually inspected.
mkimage does fail when trying to insert a public key in a DTB if it
isn't found but we can have a better error message.
Link: https://lore.kernel.org/r/20250418-binman-pubkey-dir-v2-0-b6b90a765ffe@cherry.de
|
|
key-name-hint with path
key-name-hint property in u-boot-spl-pubkey-dtb binman entry may contain
a path instead of a filename due to user mistake.
Because we currently assume it is a filename instead of a path, binman
will find the full path to the key based on that path, and return the
dirname of the full path but keeps the path in key-name-hint instead of
stripping the directories from it.
This means mkimage will fail with the following error message if we have
key-name-hint set to keys/dev:
binman: Error 1 running 'fdt_add_pubkey -a sha256,rsa2048 -k /home/qschulz/work/upstream/u-boot/keys -n keys/dev -r conf /home/qschulz/work/upstream/u-boot/build/ringneck/u-boot-spl-dtbdhsfx3mf': Couldn't open RSA certificate: '/home/qschulz/work/upstream/u-boot/keys/keys/dev.crt': No such file or directory
Let's make it a bit more obvious what the error is by erroring out in
binman if a path is provided in key-name-hint (it is named key-name-hint
and not key-path-hint after all).
Fixes: 5609843b57a4 ("binman: etype: Add u-boot-spl-pubkey-dtb etype")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
mkimage doesn't fail if it cannot find the public key but it prints to
stderr. Considering that btool.run() discards stderr, it means binman
happily returns an unsigned FIT and doesn't tell you something went
wrong.
Binman will actually find the file if there's a path in the
key-name-hint property but the current logic expects key-name-hint to be
a filename and thus returns the dirname of the found path for the key,
but with the original key-name-hint appended. This means we can have the
following:
- key-name-hint = "keys/dev"
- name = "/home/qschulz/work/upstream/u-boot/keys/"
so we pass /home/qschulz/work/upstream/u-boot/keys/ to the -k option of
mkimage but the FIT still contains "keys/dev" in key-name-hint which
means mkimage will try to find the key at
/home/qschulz/work/upstream/u-boot/keys/keys/, which doesn't exist.
Let's assume paths are simply not supported (it is named key-name-hint
and not key-path-hint after all) and raise an error if the property
contains a path so that the build fails and not quietly.
Fixes: 133c000ca334 ("binman: implement signing FIT images during image build")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
supernodes"
Moteen Shah <m-shah@ti.com> says:
In the U-Boot pre-relocation stage, if the parent node lacks
bootph-all/bootph-some-ram property and the driver lacks a pre-reloc
flag, all of its subsequent subnodes gets skipped over from driver
binding—even if they have a bootph* property.
This series addresses the issue by scanning through all the nodes during
build time and propagating the applicable property to all of its supernode.
Link: https://lore.kernel.org/r/20250516114148.3862114-1-m-shah@ti.com
|
|
Add a testcase to ensure that scan_and_prop_bootph() actually
propagates bootph-* properties to supernodes.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Aristo Chen <jj251510319013@gmail.com> says:
This series introduces a validation step in mkimage to ensure that all image
names referenced under the /configurations node of a FIT source (ITS) are
actually defined under the /images node.
### Motivation
When using mkimage to build FIT images, it's easy to mistakenly reference
nonexistent image nodes in configurations (e.g., referencing a missing `fdt` or
`firmware` node). Such issues are often not caught until runtime in U-Boot.
This series aims to catch these errors early during FIT image creation by
validating the configuration references in mkimage itself.
Link: https://lore.kernel.org/r/20250610074121.8308-1-aristo.chen@canonical.com
|
|
Several binman FIT test device trees reference image nodes such as atf
and uboot in their /configurations sections, but those image nodes
were not actually defined in the /images node. This mismatch can lead
to validation errors when stricter consistency checks are introduced.
This patch adds minimal definitions for atf and uboot under the
/images node in all relevant test DTS files.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
|
|
Some SoCs require a Trusted Firmware-A (TF-A) AP Trusted ROM (BL1) to
initialize the SoC before U-Boot can run properly. Add an atf-bl1 etype
so we can properly package BL1 into a final binary
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
|
|
i.MX95 needs to combine DDR PHY firmware images and their byte counts
together, so add a new entry type nxp-header-ddrfw for this requirement.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
|
|
Newer lz4 util is not happy with any padding at end of file,
it would abort with error message like:
Stream followed by undecodable data at position 43.
Workaround by skipping testCompUtilPadding test case and manually
strip padding in testCompressSectionSize test case.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
Dynamically going through the subnode array and deleting leads to
templates being skipped from deletion when templates are consecutive in
the subnode list. Prevent this from happening by first parsing the DT
and then deleting the nodes. Add a testcase as well for this cornercase.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
This change allows to replace both 'SEQ' and 'NAME' keywords by respectively a
sequence number and the name of the FDT to provide more flexibility in the node
name for the device trees included in the FIT.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Test the property 'fit,encrypt' to encrypt FIT data.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
|
|
The patch implement new property 'fit,sign' that can be declared
at the top-level 'fit' node. If that option is declared, fit tryies
to detect private keys directory among binman include directories.
That directory than passed to mkimage using '-k' flag and that enable
signing of FIT.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Renumbered files, moved new tests to end:
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This patch is for Marek, to provide a starting point.
To try it, use 'binman test -T' and see the missing coverage.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Some images do not have an image_pos value, for example an image which
is part of a compressed section and therefore cannot be accessed
directly.
Handle this case, returning None as the value.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The base address of the ELF containing symbols is normally added to
any symbols written, so that the value points to the correct address in
memory when everything is loaded. When the binary resides on disk, a
different offset may be needed, typically 0. Provide a way to specify
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
When using FIT to load firmware builds for multiple models, the FIT must
include a common binary along with a number of devicetree blobs, one for
each model. This is the same mechanism as is used for loading an OS.
However, SPL builds do not normally use the full devicetree, but instead
a cut-down version which various nodes and properties removed.
Add a new fit,fdt-phase property to allow binman to produce these
devicetree blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
FIT allows the FDT's root-node compatible string to be placed in a
configuration node to simplify and speed up finding the best match for
booting.
Add a new property to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
In some cases the list of available FDT files is not available in an
entryarg. Provide an option to point to a directory containing them
instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
FIT provides a way to select between different devicetree blobs
depending on the model. This works fine for U-Boot proper and allows SPL
to select the correct blob for the current board at runtime. The boot
sequence (SPL->U-Boot proper) is therefore covered by the existing
feature set.
The first boot phase (typically TPL) cannot use FIT since SoC boot ROMs
don't currently support it. Therefore the TPL image must be specific to
each model it boots on.
To support booting on mulitple models, binman must therefore produce a
separate TPL image for each model, even if the images for the rest of
the phases are identical.
TPL needs to be packaged as an executable binary along with a reduced
devicetree. When multiple models are supported, a reduced devicetree
must be provided for each model.
U-Boot's build system is designed to build a single devicetree for SPL
builds, so does not support this requirement.
Add a new 'alternatives' feature to Binman, allowing it to automatically
subset a devicetree to produce the reduced devicetree for a particular
phase for each supported model. With this it is possible to produce a
separate TPL image for each of the models. The correct one can then be
loaded onto a board, along with the common FIT image(s).
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Binman has a the useful feature of handling missing external blobs
gracefully, including allowing them to be missing, deciding whether the
resulting image is functional or not and faking blobs when this is
necessary for particular tools (e.g. mkimage).
This feature is widely used in CI. One drawback is that if U-Boot grows
too large to fit along with the required blobs, then this is not
discovered until someone does a 'real' build which includes the blobs.
Add a 'assume-size' property to entries to allow Binman to reserve a
given size for missing external blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use yamllint for checking whether YAML configuration files are adhering
to default yamllint rules.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Suggested-by: Nishanth Menon <nm@ti.com>
|
|
Add test for TI firewalling node in ti-secure.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
|
|
K3 devices introduces the concept of centralized power, resource and
security management to System Firmware. This is to overcome challenges
by the traditional approach that implements system control functions on
each of the processing units.
The software interface for System Firmware is split into TIFS and DM. DM
(Device Manager) is responsible for resource and power management from
secure and non-secure hosts. This additional binary is necessary for
specific platforms' ROM boot images and is to be packaged into tispl.bin
Add an entry for DM. The entry can be used for the packaging of
tispl.bin by binman along with ATF and TEE.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
According to the TRMs of K3 platform of devices, the ROM boot image
format specifies a "Core Options Field" that provides the capability to
set the boot core in lockstep when set to 0 or to split mode when set
to 2. Add support for providing the same from the binman DTS. Also
modify existing test case for ensuring future coverage.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add support in binman for generating EFI empty capsules. These
capsules are used in the FWU A/B update feature. Also add test cases
in binman for the corresponding code coverage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The #address-cells and #size-cells are not needed for running the
capsule generation binman tests. Remove the superfluous properties.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add support in binman for generating EFI capsules. The capsule
parameters can be specified through the capsule binman entry. Also add
test cases in binman for testing capsule generation.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add test for the 'xilinx-bootgen' etype
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allow missing bootgen tool; comment testXilinxBootgenMissing() comment:
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This provides support for phandles to be copied over from templates. This
is not quite safe, since if the template is instantiated twice (i.e. in
two different nodes), then duplicate phandles will be found. This will
result in an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Missing optional blobs was not reported for generated entries, e.g.
tee-os on rockchip targets. Implement a CheckOptional to fix this.
After this the following can be shown:
Image 'simple-bin' is missing optional external blobs but is still functional: tee-os
/binman/simple-bin/fit/images/@tee-SEQ/tee-os (tee-os):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add test for u_boot_spl_pubkey_dtb. The test adds a public key to the
dtb and checks if the required nodes will be added to the images dtb.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add tests to reach 100% code coverage for the added etype encrypted.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Drop the use of a numbered key file since numbering is just for the test
devicetree files. Also adjust the tests to avoid putting a hard-coded
path to binman in the file, using the entry arg instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The ti-secure entry contains certificate for binaries that will be
loaded or booted by system firmware whereas the ti-secure-rom entry
contains certificate for binaries that will be booted by ROM. Support
for both these types of certificates is necessary for booting of K3
devices.
Reviewed-by: Simon Glass <sjg@chromium.org>
[vigneshr@ti.com: fixed inconsist cert generation by multiple packing]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
The ti-board-config entry loads and validates a given YAML config file
against a given schema, and generates the board config binary. K3
devices require these binaries to be packed into the final system
firmware images.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Add support for writing symbols and determining the assumed position of
binaries inside a mkimage image. This is useful as an example for other
entry types which might want to do the same thing.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Allow templates to be used inside a section, not just in the top-level
/binman node.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add this as a separate test case.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Allow a template to appear in the top level description when using
multiple images.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Collections can used to collect the contents of other entries into a
single entry, but they result in a single entry, with the original entries
'left behind' in their old place.
It is useful to be able to specific a set of entries ones and have it used
in multiple images, or parts of an image.
Implement this mechanism.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Fix the check for the __bss_size symbol, since it may be 0. Unfortunately
there was no test coverage for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is not needed since the linker script sets it up. Drop the variable
to avoid confusion.
Fix the prototype for main() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Sometimes multiple boards are built with binman and it is useful to
specify a different FDT list for each. At present this is not possible
without providing multiple values of the of-list entryarg (which is not
supported in the U-Boot build system).
Allow a fit,fdt-list-val string-list property to be used instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is needed to handle mkimage with inner section located itself in a
section.
Signed-off-by: Marek Vasut <marex@denx.de>
Use BuildSectionData() instead of ObtainContents(), add tests and a few
other minor fixes:
Signed-off-by: Simon Glass <sjg@chromium.org>
|
