1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 NXP
*/
#include <common.h>
#include <init.h>
#include <spl.h>
#include <asm/io.h>
#include <errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx8ulp-pins.h>
#include <dm/uclass.h>
#include <dm/device.h>
#include <dm/uclass-internal.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <asm/arch/ddr.h>
#include <asm/arch/rdc.h>
#include <asm/arch/upower.h>
DECLARE_GLOBAL_DATA_PTR;
void spl_dram_init(void)
{
init_clk_ddr();
ddr_init(&dram_timing);
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_BOOTROM;
}
int power_init_board(void)
{
u32 pmic_reg;
/* PMIC set bucks1-4 to PWM mode */
upower_pmic_i2c_read(0x10, &pmic_reg);
upower_pmic_i2c_read(0x14, &pmic_reg);
upower_pmic_i2c_read(0x21, &pmic_reg);
upower_pmic_i2c_read(0x2e, &pmic_reg);
upower_pmic_i2c_write(0x10, 0x3d);
upower_pmic_i2c_write(0x14, 0x7d);
upower_pmic_i2c_write(0x21, 0x7d);
upower_pmic_i2c_write(0x2e, 0x3d);
upower_pmic_i2c_read(0x10, &pmic_reg);
upower_pmic_i2c_read(0x14, &pmic_reg);
upower_pmic_i2c_read(0x21, &pmic_reg);
upower_pmic_i2c_read(0x2e, &pmic_reg);
/* Set buck3 to 1.1v OD */
upower_pmic_i2c_write(0x22, 0x28);
return 0;
}
void spl_board_init(void)
{
struct udevice *dev;
uclass_find_first_device(UCLASS_MISC, &dev);
for (; dev; uclass_find_next_device(&dev)) {
if (device_probe(dev))
continue;
}
board_early_init_f();
preloader_console_init();
puts("Normal Boot\n");
/* After AP set iomuxc0, the i2c can't work, Need M33 to set it now */
/* Load the lposc fuse for single boot to work around ROM issue,
* The fuse depends on S400 to read.
*/
if (is_soc_rev(CHIP_REV_1_0) && get_boot_mode() == SINGLE_BOOT)
load_lposc_fuse();
upower_init();
power_init_board();
/* DDR initialization */
spl_dram_init();
/* This must place after upower init, so access to MDA and MRC are valid */
/* Init XRDC MDA */
xrdc_init_mda();
/* Init XRDC MRC for VIDEO, DSP domains */
xrdc_init_mrc();
/* Call it after PS16 power up */
set_lpav_qos();
}
void board_init_f(ulong dummy)
{
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
timer_init();
arch_cpu_init();
board_init_r(NULL, 0);
}
|
