1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
|
.. SPDX-License-Identifier: GPL-2.0
Arm Versatile Express
=====================
The vexpress_* board configuration supports the following platforms:
* FVP_Base_RevC-2xAEMvA
* FVP_BaseR_AEMv8R
* Juno development board
Fixed Virtual Platforms
-----------------------
The Fixed Virtual Platforms (FVP) are complete simulations of an Arm system,
including processor, memory and peripherals. They are set out in a "programmer's
view", which gives a comprehensive model on which to build and test software.
The supported FVPs are available free of charge and can be downloaded from the
Arm developer site [1]_ (user registration might be required).
The Architecture Envelope Models (AEM) FVPs offer virtual platforms for Armv8-A,
Armv9-A, and Armv8-R architectures, including a comprehensive set of System IP.
For general use though, the Armv8-A Base Rev C FVP, which emulates a generic 64-bit
Armv8-A hardware platform, is a suitable option.
Supported features:
* GICv3
* Generic timer
* PL011 UART
The default configuration assumes that U-Boot is bootstrapped using a suitable
bootloader, such as Trusted Firmware-A [4]_. The u-boot binary can be passed
into the TF-A build: ``make PLAT=<platform> all fip BL33=u-boot.bin``
The FVPs can be debugged using Arm Development Studio [2]_.
Building U-Boot
^^^^^^^^^^^^^^^
Set the ``CROSS_COMPILE`` environment variable as usual, and run:
.. code-block:: bash
make vexpress_fvp_defconfig
make
Running U-Boot
^^^^^^^^^^^^^^
Set ``CROSS_COMPILE`` as usual and build TF-A:
.. code-block:: bash
git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
cd trusted-firmware-a
make PLAT=fvp BL33=/path/to/u-boot.bin fiptool all fip
This command generates the ROM image `bl1.bin`, and a boot image `fip.bin` in
TF-A's FIP format [5]_. It contains all images executed by TF-A, including U-Boot.
Note that TF-A outputs the built binaries into `build/fvp/release/`.
If you already have a FIP image, and are primarily interested in updating the BL33
image (i.e., U-Boot), use `fiptool` from TF-A:
.. code-block:: bash
make fiptool
tools/fiptool/fiptool update --nt-fw=/path/to/u-boot.bin /path/to/fip.bin
To run the FVP:
.. code-block:: bash
FVP_Base_RevC-2xAEMvA -C bp.flashloader0.fname=fip.bin \
-C bp.secureflashloader.fname=bl1.bin \
-C bp.vis.disable_visualisation=1
This setup relies on semi-hosting, as well as, having a kernel image (``Image``)
and ramdisk (``ramdisk.img``) in the current working directory.
Juno
----
Juno is an Arm development board with the following features:
* Arm Cortex-A72/A57 and Arm Cortex-A53 in a "big.LITTLE" configuration
* A PCIe Gen2.0 bus with 4 lanes
* 8GB of DRAM
* GICv2
More details can be found in the board documentation [3]_.
Bloblist Support
----------------
The ``vexpress_fvp_bloblist_defconfig`` configures U-Boot to be compiled for
Vexpress64 with Bloblist as the primary method for information handoff between
boot stages. U-Boot offers three methods to set up a bloblist: using a
predefined bloblist at a specified address, dynamically allocating memory for a
bloblist, or utilizing a standard passage-provided bloblist with automatic size
detection.
By default, ``vexpress_fvp_bloblist_defconfig`` uses the standard passage method mandatorily
(CONFIG_BLOBLIST_PASSAGE_MANDATORY) because TF-A provides a Transfer List in non-secure
memory that U-Boot can utilise. This Bloblist, which is referred to as a Transfer List in
TF-A, contains all necessary data for the handoff process, including DT and ACPI
tables.
References
----------
.. [1] https://developer.arm.com/Tools%20and%20Software/Fixed%20Virtual%20Platforms/Arm%20Architecture%20FVPs
.. [2] https://developer.arm.com/tools-and-software/embedded/arm-development-studio
.. [3] https://developer.arm.com/tools-and-software/development-boards/juno-development-board
.. [4] https://trustedfirmware-a.readthedocs.io/
.. [5] https://trustedfirmware-a.readthedocs.io/en/latest/getting_started/image-terminology.html#firmware-image-package-fip
|
