Merge tag 'v4.10-rc5' into for-linus

Sync up with mainline to apply fixup to a commit that came through
power supply tree.

11 files changed, 182 insertions, 82 deletions

diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index d15d8ba8cc24..e69e415d0d98 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 
 #define DW_DMA_MAX_NR_MASTERS	4
+#define DW_DMA_MAX_NR_CHANNELS	8
 
 /**
  * struct dw_dma_slave - Controller-specific information about a slave
@@ -23,6 +24,7 @@
  * @dst_id:	dst request line
  * @m_master:	memory master for transfers on allocated channel
  * @p_master:	peripheral master for transfers on allocated channel
+ * @hs_polarity:set active low polarity of handshake interface
  */
 struct dw_dma_slave {
 	struct device		*dma_dev;
@@ -30,6 +32,7 @@ struct dw_dma_slave {
 	u8			dst_id;
 	u8			m_master;
 	u8			p_master;
+	bool			hs_polarity;
 };
 
 /**
@@ -44,6 +47,7 @@ struct dw_dma_slave {
  * @nr_masters: Number of AHB masters supported by the controller
  * @data_width: Maximum data width supported by hardware per AHB master
  *		(in bytes, power of 2)
+ * @multi_block: Multi block transfers supported by hardware per channel.
  */
 struct dw_dma_platform_data {
 	unsigned int	nr_channels;
@@ -58,6 +62,7 @@ struct dw_dma_platform_data {
 	unsigned int	block_size;
 	unsigned char	nr_masters;
 	unsigned char	data_width[DW_DMA_MAX_NR_MASTERS];
+	unsigned char	multi_block[DW_DMA_MAX_NR_CHANNELS];
 };
 
 #endif /* _PLATFORM_DATA_DMA_DW_H */
diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h
index 0c72886030ef..422d4504dbac 100644
--- a/include/linux/platform_data/dma-mmp_tdma.h
+++ b/include/linux/platform_data/dma-mmp_tdma.h
@@ -28,7 +28,7 @@ struct sram_platdata {
 	int granularity;
 };
 
-#ifdef CONFIG_ARM
+#ifdef CONFIG_MMP_SRAM
 extern struct gen_pool *sram_get_gpool(char *pool_name);
 #else
 static inline struct gen_pool *sram_get_gpool(char *pool_name)
diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h
index 89ba1b0c90e4..4f9aba405e96 100644
--- a/include/linux/platform_data/dma-s3c24xx.h
+++ b/include/linux/platform_data/dma-s3c24xx.h
@@ -30,16 +30,22 @@ struct s3c24xx_dma_channel {
 	u16 chansel;
 };
 
+struct dma_slave_map;
+
 /**
  * struct s3c24xx_dma_platdata - platform specific settings
  * @num_phy_channels: number of physical channels
  * @channels: array of virtual channel descriptions
  * @num_channels: number of virtual channels
+ * @slave_map: dma slave map matching table
+ * @slavecnt: number of elements in slave_map
  */
 struct s3c24xx_dma_platdata {
 	int num_phy_channels;
 	struct s3c24xx_dma_channel *channels;
 	int num_channels;
+	const struct dma_slave_map *slave_map;
+	int slavecnt;
 };
 
 struct dma_chan;
diff --git a/include/linux/platform_data/gpio-htc-egpio.h b/include/linux/platform_data/gpio-htc-egpio.h
new file mode 100644
index 000000000000..b4201c971367
--- /dev/null
+++ b/include/linux/platform_data/gpio-htc-egpio.h
@@ -0,0 +1,57 @@
+/*
+ * HTC simple EGPIO irq and gpio extender
+ */
+
+#ifndef __HTC_EGPIO_H__
+#define __HTC_EGPIO_H__
+
+#include <linux/gpio.h>
+
+/* Descriptive values for all-in or all-out htc_egpio_chip descriptors. */
+#define HTC_EGPIO_OUTPUT (~0)
+#define HTC_EGPIO_INPUT  0
+
+/**
+ * struct htc_egpio_chip - descriptor to create gpio_chip for register range
+ * @reg_start: index of first register
+ * @gpio_base: gpio number of first pin in this register range
+ * @num_gpios: number of gpios in this register range, max BITS_PER_LONG
+ *    (number of registers = DIV_ROUND_UP(num_gpios, reg_width))
+ * @direction: bitfield, '0' = input, '1' = output,
+ */
+struct htc_egpio_chip {
+	int           reg_start;
+	int           gpio_base;
+	int           num_gpios;
+	unsigned long direction;
+	unsigned long initial_values;
+};
+
+/**
+ * struct htc_egpio_platform_data - description provided by the arch
+ * @irq_base: beginning of available IRQs (eg, IRQ_BOARD_START)
+ * @num_irqs: number of irqs
+ * @reg_width: number of bits per register, either 8 or 16 bit
+ * @bus_width: alignment of the registers, either 16 or 32 bit
+ * @invert_acks: set if chip requires writing '0' to ack an irq, instead of '1'
+ * @ack_register: location of the irq/ack register
+ * @chip: pointer to array of htc_egpio_chip descriptors
+ * @num_chips: number of egpio chip descriptors
+ */
+struct htc_egpio_platform_data {
+	int                   bus_width;
+	int                   reg_width;
+
+	int                   irq_base;
+	int                   num_irqs;
+	int                   invert_acks;
+	int                   ack_register;
+
+	struct htc_egpio_chip *chip;
+	int                   num_chips;
+};
+
+/* Determine the wakeup irq, to be called during early resume */
+extern int htc_egpio_get_wakeup_irq(struct device *dev);
+
+#endif
diff --git a/include/linux/platform_data/gpio-lpc32xx.h b/include/linux/platform_data/gpio-lpc32xx.h
deleted file mode 100644
index a544e962a818..000000000000
--- a/include/linux/platform_data/gpio-lpc32xx.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_GPIO_LPC32XX_H
-#define __MACH_GPIO_LPC32XX_H
-
-/*
- * Note!
- * Muxed GP pins need to be setup to the GP state in the board level
- * code prior to using this driver.
- * GPI pins : 28xP3 group
- * GPO pins : 24xP3 group
- * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
- */
-
-#define LPC32XX_GPIO_P0_MAX 8
-#define LPC32XX_GPIO_P1_MAX 24
-#define LPC32XX_GPIO_P2_MAX 13
-#define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 29
-#define LPC32XX_GPO_P3_MAX 24
-
-#define LPC32XX_GPIO_P0_GRP 0
-#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
-#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
-#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
-#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
-#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
-
-/*
- * A specific GPIO can be selected with this macro
- * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
- * See the LPC32x0 User's guide for GPIO group numbers
- */
-#define LPC32XX_GPIO(x, y) ((x) + (y))
-
-#endif /* __MACH_GPIO_LPC32XX_H */
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
index 21b15f6fee25..7815d50c26ff 100644
--- a/include/linux/platform_data/macb.h
+++ b/include/linux/platform_data/macb.h
@@ -8,6 +8,8 @@
 #ifndef __MACB_PDATA_H__
 #define __MACB_PDATA_H__
 
+#include <linux/clk.h>
+
 /**
  * struct macb_platform_data - platform data for MACB Ethernet
  * @phy_mask:		phy mask passed when register the MDIO bus
@@ -15,12 +17,16 @@
  * @phy_irq_pin:	PHY IRQ
  * @is_rmii:		using RMII interface?
  * @rev_eth_addr:	reverse Ethernet address byte order
+ * @pclk:		platform clock
+ * @hclk:		AHB clock
  */
 struct macb_platform_data {
 	u32		phy_mask;
 	int		phy_irq_pin;
 	u8		is_rmii;
 	u8		rev_eth_addr;
+	struct clk	*pclk;
+	struct clk	*hclk;
 };
 
 #endif /* __MACB_PDATA_H__ */
diff --git a/include/linux/platform_data/mlxcpld-hotplug.h b/include/linux/platform_data/mlxcpld-hotplug.h
new file mode 100644
index 000000000000..e4cfcffaa6f4
--- /dev/null
+++ b/include/linux/platform_data/mlxcpld-hotplug.h
@@ -0,0 +1,99 @@
+/*
+ * include/linux/platform_data/mlxcpld-hotplug.h
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H
+#define __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H
+
+/**
+ * struct mlxcpld_hotplug_device - I2C device data:
+ * @adapter: I2C device adapter;
+ * @client: I2C device client;
+ * @brdinfo: device board information;
+ * @bus: I2C bus, where device is attached;
+ *
+ * Structure represents I2C hotplug device static data (board topology) and
+ * dynamic data (related kernel objects handles).
+ */
+struct mlxcpld_hotplug_device {
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	struct i2c_board_info brdinfo;
+	u16 bus;
+};
+
+/**
+ * struct mlxcpld_hotplug_platform_data - device platform data:
+ * @top_aggr_offset: offset of top aggregation interrupt register;
+ * @top_aggr_mask: top aggregation interrupt common mask;
+ * @top_aggr_psu_mask: top aggregation interrupt PSU mask;
+ * @psu_reg_offset: offset of PSU interrupt register;
+ * @psu_mask: PSU interrupt mask;
+ * @psu_count: number of equipped replaceable PSUs;
+ * @psu: pointer to PSU devices data array;
+ * @top_aggr_pwr_mask: top aggregation interrupt power mask;
+ * @pwr_reg_offset: offset of power interrupt register
+ * @pwr_mask: power interrupt mask;
+ * @pwr_count: number of power sources;
+ * @pwr: pointer to power devices data array;
+ * @top_aggr_fan_mask: top aggregation interrupt FAN mask;
+ * @fan_reg_offset: offset of FAN interrupt register;
+ * @fan_mask: FAN interrupt mask;
+ * @fan_count: number of equipped replaceable FANs;
+ * @fan: pointer to FAN devices data array;
+ *
+ * Structure represents board platform data, related to system hotplug events,
+ * like FAN, PSU, power cable insertion and removing. This data provides the
+ * number of hot-pluggable devices and hardware description for event handling.
+ */
+struct mlxcpld_hotplug_platform_data {
+	u16 top_aggr_offset;
+	u8 top_aggr_mask;
+	u8 top_aggr_psu_mask;
+	u16 psu_reg_offset;
+	u8 psu_mask;
+	u8 psu_count;
+	struct mlxcpld_hotplug_device *psu;
+	u8 top_aggr_pwr_mask;
+	u16 pwr_reg_offset;
+	u8 pwr_mask;
+	u8 pwr_count;
+	struct mlxcpld_hotplug_device *pwr;
+	u8 top_aggr_fan_mask;
+	u16 fan_reg_offset;
+	u8 fan_mask;
+	u8 fan_count;
+	struct mlxcpld_hotplug_device *fan;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H */
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index c55e42ee57fa..f01659026b26 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -12,9 +12,10 @@
 #ifndef __MTD_NAND_S3C2410_H
 #define __MTD_NAND_S3C2410_H
 
+#include <linux/mtd/nand.h>
+
 /**
  * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
  * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
  *			Setting this flag will allow the kernel to
  *			look for it at boot time and also skip the NAND
@@ -31,7 +32,6 @@
  * a warning at boot time.
  */
 struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
 	unsigned int		flash_bbt:1;
 
 	unsigned int		options;
@@ -40,6 +40,7 @@ struct s3c2410_nand_set {
 	char			*name;
 	int			*nr_map;
 	struct mtd_partition	*partitions;
+	struct device_node	*of_node;
 };
 
 struct s3c2410_platform_nand {
@@ -51,6 +52,8 @@ struct s3c2410_platform_nand {
 
 	unsigned int	ignore_unset_ecc:1;
 
+	nand_ecc_modes_t	ecc_mode;
+
 	int			nr_sets;
 	struct s3c2410_nand_set *sets;
 
diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h
index bfbd12b41162..71a1b2399c48 100644
--- a/include/linux/platform_data/remoteproc-omap.h
+++ b/include/linux/platform_data/remoteproc-omap.h
@@ -39,9 +39,9 @@ struct omap_rproc_pdata {
 	const char *firmware;
 	const char *mbox_name;
 	const struct rproc_ops *ops;
-	int (*device_enable) (struct platform_device *pdev);
-	int (*device_shutdown) (struct platform_device *pdev);
-	void(*set_bootaddr)(u32);
+	int (*device_enable)(struct platform_device *pdev);
+	int (*device_shutdown)(struct platform_device *pdev);
+	void (*set_bootaddr)(u32);
 };
 
 #if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index 5c1e21c87270..da79774078a7 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -40,9 +40,6 @@ struct s3c64xx_spi_info {
 	int num_cs;
 	bool no_cs;
 	int (*cfg_gpio)(void);
-	dma_filter_fn filter;
-	void *dma_tx;
-	void *dma_rx;
 };
 
 /**
diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h
index e0bc4abe69c2..0926e99f2e8f 100644
--- a/include/linux/platform_data/usb-davinci.h
+++ b/include/linux/platform_data/usb-davinci.h
@@ -11,29 +11,6 @@
 #ifndef __ASM_ARCH_USB_H
 #define __ASM_ARCH_USB_H
 
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD	(1 << 17)
-#define CFGCHIP2_VBUSSENSE	(1 << 16)
-#define CFGCHIP2_RESET		(1 << 15)
-#define CFGCHIP2_OTGMODE	(3 << 13)
-#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
-#define CFGCHIP2_FORCE_HOST	(1 << 13)
-#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
-#define CFGCHIP2_PHYPWRDN	(1 << 10)
-#define CFGCHIP2_OTGPWRDN	(1 << 9)
-#define CFGCHIP2_DATPOL 	(1 << 8)
-#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
-#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
-#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
-#define CFGCHIP2_REFFREQ	(0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
-
 struct	da8xx_ohci_root_hub;
 
 typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,