regulator: pf9453: optimize PMIC PF9453 driver

Merge series from Joy Zou <joy.zou@nxp.com>:

For the details, please check the patch commit log.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Joy Zou (3):
      regulator: pf9453: change the device ID register address
      regulator: pf9453: remove low power mode
      regulator: pf9453: remove unused I2C_LT register

 drivers/regulator/pf9453-regulator.c | 22 +---------------------
 1 file changed, 1 insertion(+), 21 deletions(-)
---
base-commit: 98bd8b16ae57e8f25c95d496fcde3dfdd8223d41
change-id: 20251103-b4-next-pf9453-c9f8fb6e0c10

Best regards,
--
Joy Zou <joy.zou@nxp.com>

4 files changed, 11 insertions, 8 deletions

diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 8e8d1cc8b06c..44c30183ecc3 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -341,15 +341,15 @@ enum req_op {
 	/* write the zero filled sector many times */
 	REQ_OP_WRITE_ZEROES	= (__force blk_opf_t)9,
 	/* Open a zone */
-	REQ_OP_ZONE_OPEN	= (__force blk_opf_t)10,
+	REQ_OP_ZONE_OPEN	= (__force blk_opf_t)11,
 	/* Close a zone */
-	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)11,
+	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)13,
 	/* Transition a zone to full */
-	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)13,
+	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)15,
 	/* reset a zone write pointer */
-	REQ_OP_ZONE_RESET	= (__force blk_opf_t)15,
+	REQ_OP_ZONE_RESET	= (__force blk_opf_t)17,
 	/* reset all the zone present on the device */
-	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)17,
+	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)19,
 
 	/* Driver private requests */
 	REQ_OP_DRV_IN		= (__force blk_opf_t)34,
@@ -478,6 +478,7 @@ static inline bool op_is_zone_mgmt(enum req_op op)
 {
 	switch (op & REQ_OP_MASK) {
 	case REQ_OP_ZONE_RESET:
+	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_ZONE_OPEN:
 	case REQ_OP_ZONE_CLOSE:
 	case REQ_OP_ZONE_FINISH:
diff --git a/include/linux/fbcon.h b/include/linux/fbcon.h
index 81f0e698acbf..f206370060e1 100644
--- a/include/linux/fbcon.h
+++ b/include/linux/fbcon.h
@@ -18,6 +18,7 @@ void fbcon_suspended(struct fb_info *info);
 void fbcon_resumed(struct fb_info *info);
 int fbcon_mode_deleted(struct fb_info *info,
 		       struct fb_videomode *mode);
+void fbcon_delete_modelist(struct list_head *head);
 void fbcon_new_modelist(struct fb_info *info);
 void fbcon_get_requirement(struct fb_info *info,
 			   struct fb_blit_caps *caps);
@@ -38,6 +39,7 @@ static inline void fbcon_suspended(struct fb_info *info) {}
 static inline void fbcon_resumed(struct fb_info *info) {}
 static inline int fbcon_mode_deleted(struct fb_info *info,
 				     struct fb_videomode *mode) { return 0; }
+static inline void fbcon_delete_modelist(struct list_head *head) {}
 static inline void fbcon_new_modelist(struct fb_info *info) {}
 static inline void fbcon_get_requirement(struct fb_info *info,
 					 struct fb_blit_caps *caps) {}
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 4e1ac1fbcec4..55343795644b 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1643,7 +1643,7 @@ struct regmap_irq_chip_data;
  * @status_invert: Inverted status register: cleared bits are active interrupts.
  * @status_is_level: Status register is actuall signal level: Xor status
  *		     register with previous value to get active interrupts.
- * @wake_invert: Inverted wake register: cleared bits are wake enabled.
+ * @wake_invert: Inverted wake register: cleared bits are wake disabled.
  * @type_in_mask: Use the mask registers for controlling irq type. Use this if
  *		  the hardware provides separate bits for rising/falling edge
  *		  or low/high level interrupts and they should be combined into
diff --git a/include/linux/sched.h b/include/linux/sched.h
index cbb7340c5866..b469878de25c 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2407,12 +2407,12 @@ static inline void __migrate_enable(void) { }
  * be defined in kernel/sched/core.c.
  */
 #ifndef INSTANTIATE_EXPORTED_MIGRATE_DISABLE
-static inline void migrate_disable(void)
+static __always_inline void migrate_disable(void)
 {
 	__migrate_disable();
 }
 
-static inline void migrate_enable(void)
+static __always_inline void migrate_enable(void)
 {
 	__migrate_enable();
 }