diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-interrupt.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-interrupt.yaml | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-interrupt.yaml new file mode 100644 index 000000000000..a62f0fd2435b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-interrupt.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-interrupt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED AST2700 Interrupt Controllers (INTC0/INTC1) + +description: | + The ASPEED AST2700 SoC integrates two interrupt controller designs: + + - INTC0: Primary controller that routes interrupt sources to upstream, + processor-specific interrupt controllers + + - INTC1: Secondary controller whose interrupt outputs feed into INTC0 + + The SoC contains four processors to which interrupts can be routed: + + - PSP: Primary Service Processor (Cortex-A35) + - SSP: Secondary Service Processor (Cortex-M4) + - TSP: Tertiary Service Processor (Cortex-M4) + - BMCU: Boot MCU (a RISC-V microcontroller) + + The following diagram illustrates the overall architecture of the + ASPEED AST2700 interrupt controllers: + + +-----------+ +-----------+ + | INTC0 | | INTC1(0) | + +-----------+ +-----------+ + | Router | +-----------+ | Router | + | out int | +Peripheral + | out int | + +-----------+ | 0 0 <-+Controllers+ | INTM | +-----------+ + |PSP GIC <-|---+ . . | +-----------+ | . . <-+Peripheral + + +-----------+ | . . | | . . | +Controllers+ + +-----------+ | . . | | . . | +-----------+ + |SSP NVIC <-|---+ . . <----------------+ . . | + +-----------+ | . . | | . . | + +-----------+ | . . <-------- | . . | + |TSP NVIC <-|---+ . . | | ----+ . . | + +-----------+ | . . | | | | O P | + | . . | | | +-----------+ + | . . <---- | -------------------- + | . . | | | +-----------+ | + | M N | | ---------+ INTC1(1) | | + +-----------+ | +-----------+ | + | . | + | +-----------+ | + -------------+ INTC1(N) | | + +-----------+ | + +--------------+ | + + BMCU APLIC <-+--------------------------------------------- + +--------------+ + + INTC0 supports: + - 128 local peripheral interrupt inputs + - Fan-in from up to three INTC1 instances via banked interrupt lines (INTM) + - Local peripheral interrupt outputs + - Merged interrupt outputs + - Software interrupt outputs (SWINT) + - Configurable interrupt routes targeting the PSP, SSP, and TSP + + INTC1 supports: + - 192 local peripheral interrupt inputs + - Banked interrupt outputs (INTM, 5 x 6 banks x 32 interrupts per bank) + - Configurable interrupt routes targeting the PSP, SSP, TSP, and BMCU + + One INTC1 instance is always present, on the SoC's IO die. A further two + instances may be attached to the SoC's one INTC0 instance via LTPI (LVDS + Tunneling Protocol & Interface). + + Interrupt numbering model + ------------------------- + The binding uses a controller-local numbering model. Peripheral device + nodes use the INTCx local interrupt number (hwirq) in their 'interrupts' or + 'interrupts-extended' properties. + + For AST2700, INTC0 exposes the following (inclusive) input ranges: + + - 000..479: Independent interrupts + - 480..489: INTM0-INTM9 + - 490..499: INTM10-INTM19 + - 500..509: INTM20-INTM29 + - 510..519: INTM30-INTM39 + - 520..529: INTM40-INTM49 + + INTC0's (inclusive) output ranges are as follows: + + - 000..127: 1:1 local peripheral interrupt output to PSP + - 144..151: Software interrupts from the SSP output to PSP + - 152..159: Software interrupts from the TSP output to PSP + - 192..201: INTM0-INTM9 banked outputs to PSP + - 208..217: INTM30-INTM39 banked outputs to PSP + - 224..233: INTM40-INTM49 banked outputs to PSP + - 256..383: 1:1 local peripheral interrupt output to SSP + - 384..393: INTM10-INTM19 banked outputs to SSP + - 400..407: Software interrupts from the PSP output to SSP + - 408..415: Software interrupts from the TSP output to SSP + - 426..553: 1:1 local peripheral interrupt output to TSP + - 554..563: INTM20-INTM29 banked outputs to TSP + - 570..577: Software interrupts from the PSP output to TSP + - 578..585: Software interrupts from the SSP output to TSP + + Inputs and outputs for INTC1 instances are context-dependent. However, for the + first instance of INTC1, the (inclusive) output ranges are: + + - 00..05: INTM0-INTM5 + - 10..15: INTM10-INTM15 + - 20..25: INTM20-INTM25 + - 30..35: INTM30-INTM35 + - 40..45: INTM40-INTM45 + - 50..50: BootMCU + +maintainers: + - Ryan Chen <ryan_chen@aspeedtech.com> + - Andrew Jeffery <andrew@codeconstruct.com.au> + +properties: + compatible: + enum: + - aspeed,ast2700-intc0 + - aspeed,ast2700-intc1 + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: Single cell encoding the INTC local interrupt number (hwirq). + + aspeed,interrupt-ranges: + description: | + Describes how ranges of controller output pins are routed to a parent + interrupt controller. + + Each range entry is encoded as: + + <out count phandle parent-specifier...> + + where: + - out: First controller interrupt output index in the range. + - count: Number of consecutive controller interrupt outputs and parent + interrupt inputs in this range. + - phandle: Phandle to the parent interrupt controller node. + - parent-specifier: Interrupt specifier, as defined by the parent + interrupt controller binding. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + items: + description: Range descriptors with a parent interrupt specifier. + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + - aspeed,interrupt-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + interrupt-controller@12100000 { + compatible = "aspeed,ast2700-intc0"; + reg = <0x12100000 0x3b00>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <1>; + + aspeed,interrupt-ranges = + <0 128 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <144 8 &gic GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <152 8 &gic GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <192 10 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <208 10 &gic GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <224 10 &gic GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, + <256 128 &ssp_nvic 0 0>, + <384 10 &ssp_nvic 160 0>, + <400 8 &ssp_nvic 144 0>, + <408 8 &ssp_nvic 152 0>, + <426 128 &tsp_nvic 0 0>, + <554 10 &tsp_nvic 160 0>, + <570 8 &tsp_nvic 144 0>, + <578 8 &tsp_nvic 152 0>; + }; |