1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
deleted file mode 100644
index 062ebb14cecf..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-TI Real Time Clock
-
-Required properties:
-- compatible:
-	- "ti,da830-rtc"  - for RTC IP used similar to that on DA8xx SoC family.
-	- "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
-			    This RTC IP has special WAKE-EN Register to enable
-			    Wakeup generation for event Alarm. It can also be
-			    used to control an external PMIC via the
-			    pmic_power_en pin.
-	- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
-- reg: Address range of rtc register set
-- interrupts: rtc timer, alarm interrupts in order
-
-Optional properties:
-- system-power-controller: whether the rtc is controlling the system power
-  through pmic_power_en
-- clocks: Any internal or external clocks feeding in to rtc
-- clock-names: Corresponding names of the clocks
-- pinctrl-0: a phandle pointing to the pin settings for the device
-- pinctrl-names: should be "default"
-
-Optional subnodes:
-- generic pinctrl node
-
-Required pinctrl subnodes properties:
-- pins - Names of ext_wakeup pins to configure
-
-Optional pinctrl subnodes properties:
-- input-enable - Enables ext_wakeup
-- ti,active-high - Set input active high (by default active low)
-
-Example:
-
-rtc@1c23000 {
-	compatible = "ti,da830-rtc";
-	reg = <0x23000 0x1000>;
-	interrupts = <19
-		      19>;
-	interrupt-parent = <&intc>;
-	system-power-controller;
-	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
-	clock-names = "ext-clk", "int-clk";
-
-	pinctrl-0 = <&ext_wakeup>;
-	pinctrl-names = "default";
-
-	ext_wakeup: ext-wakeup {
-		pins = "ext_wakeup0";
-		input-enable;
-		ti,active-high;
-	};
-};