| Age | Commit message (Collapse) | Author |
|---|
|
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 24e67d28ef95 ("dt-bindings: arm: fsl: Add GOcontroll Moduline Display")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible strings for Toradex SMARC iMX95 SoM and
Toradex SMARC Development carrier board.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
From software perspective, Rev.C HDMI and Rev.B HDMI don't differ since
the panel is connected via HDMI and the touchscreen is connected via
USB. However, the bootloader firmware expects to find a dts with the
correct revc-hdmi compatible.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device-tree bindings for PHYTEC phyBOARD-Segin-i.MX91 board based on
the PHYTEC phyCORE-i.MX91 SoM (System-on-Module).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible string for Protonic PRT8ML board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document support for i.MX 95 Verdin Evaluation Kit (EVK), which
used to be the Titan EVK.
Note that the SoM used in this EVK is a derivative SoM from Verdin
line of SoMs, an actual i.MX95 Verdin SoM is under development.
[1] https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx95-evaluation-kit
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In preparation for adding a new device tree variant with a different
panel, describe the DT compatible in the binding.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa91xx series is using NXP i.MX91 CPU on an LGA or socketable type board.
MBa91xxCA is a starterkit base board for TQMa91xx on an adapter board.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bindings for SolidRun i.MX8M Plus System on Module based boards:
- CuBox-M is a complete produc with enclosure including the SoM
- HummingBoard Mate/Pro/Pulse/Ripple are evaluation boards with common
design but different available interfaces.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board.
Signed-off-by: Ray Chang <ray.chang@technexion.com>
Signed-off-by: Richard Hu <richard.hu@technexion.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the board imx91-11x11-evk in the binding document.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMLS1012AL is a SOM using NXP LS1012A CPU. MBLS1012AL is a carrier
reference design.
[1] https://www.tq-group.com/en/products/tq-embedded/qoriq-layerscape/tqmls1012al
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible string for the i.MX8ULP EVK9 board.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document the Ultratronik Ultra-MACH SBC, based on the NXP i.MX8MP SoC.
This board is manufactured by Ultratronik GmbH and uses the compatible
string "ux,imx8mp-ultra-mach-sbc".
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
imx95-libra-rdk-fpsc is a development board based on the phyCORE-i.MX 95
Plus FPSC SoM. Add its description and binding.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add devicetree bindings for Engicam MicroGEA GTW board based on the
Engicam MicroGEA SoM (System-on-Module).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add devicetree bindings for Engicam MicroGEA RMM board based on the
Engicam MicroGEA SoM (System-on-Module).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add devicetree bindings for Engicam MicroGEA BMM board based on the
Engicam MicroGEA SoM (System-on-Module).
The use of an enum for a single element is justified by the future
addition of other boards based on the same SoM.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The board includes the following resources:
- 256 Mbytes NAND Flash
- 128 Mbytes DRAM DDR2
- CAN
- USB 2.0 high-speed/full-speed
- Ethernet MAC
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document the compatible strings for the Moduline Display controller.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add devicetree bindings for PHYTEC phyBOARD-Nash-i.MX93 board based on
the existing PHYTEC phyCORE-i.MX93 SoM (System-on-Module).
Adjust the compatibles for the existing phyBOARD-Segin-i.MX93 board, to
be able to add additional board based on the phyCORE-i.MX93 SoM.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa95xxSA is a SOM using NXP i.MX95 CPU. MB-SMARC-2 is a carrier
reference design.
[1] https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma95xxsa/
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa8XxS is a SOM series featuring NXP i.MX8X SoC.
They are called TQMa8XQPS and TQMa8XDPS respectively.
MB-SMARC-2 is a carrier reference design.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible string for NXP i.MX943 EVK board.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
imx8mp-libra-rdk-fpsc is a development board based on the phyCORE-i.MX
8M Plus FPSC SoM. Add its description and binding. The
imx8mp-phycore-fpsc som differs from the existing phyCORE-i.MX 8M Plus
(dts: imx8mp-phycore-som.dtsi) in its physical form regarding the ball
grid array. Other differences between the SoMs are missing SPI-NOR on
this SoM and 1.8V IO voltage instead of 3.3V as found on the existing
imx8mp-phycore-som. As a result the imx8mp-phycore-som is not compatible
with this new libra development board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add MBa91xxCA starterkit base board for TQMa93xxCA/LA SOM for
parallel display evaluation.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible strings for Toradex SMARC iMX8MP SoM and
Toradex SMARC Development carrier board.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adds support for the Nitrogen8M Plus System on Module and the Nitrogen8M
Plus ENC Carrier Board.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite i.MX6UL VAR-SOM-MX6UL and the Variscite
Concerto carrier board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Toradex SOMs cannot be used alone without a carrier board, so drop
the usage of its compatible alone.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible string for NXP i.MX95 15x15 EVK board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Skov i.MX8MP boards are a family of climate controllers.
In preparation for adding device trees for three more variants,
describe their DT compatible in the bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx287 based btt3 board is very similar to xea in terms of used SOM
module.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes that have been gathered since the
previous pull request.
All about device-specific fixes and quirks, and most of them are
pretty small and trivial"
* tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130
ALSA: hda: Fix headset detection failure due to unstable sort
ALSA: pcm: use new array-copying-wrapper
ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control
ASoC: amd: acp: Fix possible deadlock
firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP
ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro
ALSA: hda/realtek: Fix quirk matching for Legion Pro 7
ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V
ASoC: da7213: Initialize the mutex
ASoC: use to_platform_device() instead of container_of()
ASoC: acp: Support microphone from Lenovo Go S
ASoC: SOF: imx8m: Add entry for new 8M Plus revision
ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions
ASoC: SOF: imx: Add mach entry to select cs42888 topology
dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP
ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER
ASoC: audio-graph-card2: use correct endpoint when getting link parameters
ASoC: SOF: imx8m: add SAI2,5,6,7
...
|
|
wm8960 codec is EOL so we have i.MX8MP EVK Rev B4,
i.MX8QM MEK Rev D and i.MX8QXP MEK WCPU boards with
wm8962 codec.
Therefore, add compatibles for them.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
add support for the i.MX8MP based SoM and carrier from ABB.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adds compatible strings for the Kobo Clara 2E eBook reader.
There are two variants differing in the EPD PMIC used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Carrier Board
Adds support for the Nitrogen8MP SMARC System on Module and
the Nitrogen8MP Universal SMARC Carrier Board.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adds support for the Gateworks GW82XX-2X development kit
based on a GW82XX baseboard and a GW702X System On Module.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation board.
The evaluation board features three serial ports, USB OTG, USB host with
an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio, PCIe
and HDMI video output.
All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier
board. This system is populated with serial console, EQoS ethernet, eMMC, SD,
SPI NOR, LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document support for DH electronics i.MX8MP DHCOM SoM on DRC02 carrier board.
This system is populated with two ethernet ports, two CANs, RS485 and RS232,
USB, capacitive buttons and an OLED display.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add new board from the Y Soft IOTA family. This one is based on the i.MX8MP
SoC. It is basically a stripped-down clone of the EVK board with some minor
additions.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add Toradex Verdin Ivy carrier board support.
https://www.toradex.com/products/carrier-board/ivy-carrier-board
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add Toradex Verdin Ivy carrier board support.
https://www.toradex.com/products/carrier-board/ivy-carrier-board
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM
from Phytec.
Add an entry for this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the bindings for the Kontron i.MX8MP OSM-S SoM and carrier
boards.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adds support for the Variscite VAR-SOM-MX8MP System on Module and
the Variscite Symphony Evaluation Kit.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone
without motherboard, so drop the usage of its compatible alone.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW7905 was renamed to GW7500 before production release.
While we typically do not change compatibles, the GW7905 was never
released before its product name was changed to a GW7500.
The use the the 'xx' wildcard is to denote the fact that this
device-tree can support range of board models from GW7500 to GW7599 as
has been done historically with the Gateworks baseboards to support
various build customizatoins based on the same PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
