| Age | Commit message (Collapse) | Author |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are fewer devicetree updates this time that the last few ones,
with five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This
brings back the ZX family of chips that was removed in 2021 after
support for the original zx296702 and zx296718 chips was never
completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N
(R8A77965) automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which
has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there are
39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on an
ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs
from Variscite, Toradex and SolidRun, plus a number of overlays for
combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to new
overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving
hardware support for the existing boards across vendors (NXP,
Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number
of cleanups and warning fixes have made it in this time"
* tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (665 commits)
arm64: dts: aspeed: Fix duplicate pinctrl labels and address scheme
arm64: dts: bst: enable eMMC controller in C1200
dt-bindings: display/lvds-codec: add ti,sn65lvds93
arm64: dts: allwinner: a523: Add missing GPIO interrupt
arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap
arm64: dts: aspeed: Add initial AST27xx SoC device tree
arm64: Kconfig: Add ASPEED SoC family Kconfig support
dt-bindings: arm: aspeed: Add AST2700 board compatible
arm64: dts: allwinner: a523: add gpadc node
arm64: dts: allwinner: Add EL2 virtual timer interrupt
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
arm64: dts: imx93-var-som-symphony: enable ADC
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
arm64: dts: imx93-var-som-symphony: enable UART7
arm64: dts: imx93-var-som-symphony: add TPM support
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 7.2 - Take 2
Some changes for old chips and some for recent ones.
- A83T gained the MIPI CSI-2 receiver
- overlays enabled for Pine64 boards
- D1s / T113 and H616 gained the high speed timer
- T113s watchdog enabled (for reboot)
- H616 gained proper SRAM regions
- A523 family gained EL2 virtual timer interrupt and GPADC
- A523 pinctrl IRQ fix
* tag 'sunxi-dt-for-7.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a523: Add missing GPIO interrupt
arm64: dts: allwinner: a523: add gpadc node
arm64: dts: allwinner: Add EL2 virtual timer interrupt
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
arm64: dts: allwinner: sun50i-a64: Enable DT overlays
arm: dts: allwinner: t113s: enable watchdog for reboot
arm64: dts: allwinner: h616: add hstimer node
riscv: dts: allwinner: d1s-t113: add hstimer node
arm64: dts: allwinner: sun50i-h616: Add SRAM nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v7.2
This update includes:
- I3C controller device tree node for SAMA7D65 SoC
* tag 'at91-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: add I3C controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: OMAP updates for v7.2
Minor DTS fixes & updates
* tag 'omap-for-v7.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: dm8168-evm: Set stdout-path to uart3
arch: arm: dts: cpcap-mapphone: Add audio-codec jack detection interrupts
arch: arm: dts: cpcap-mapphone: Set VAUDIO regulator always-on
ARM: dts: ti/omap: omap4-epson-embt2ws: fix typo in iio device property
ARM: dts: am335x-sl50: Fix audio bitclock and frame master endpoint
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt
i.MX ARM device tree changes for 7.2:
DT Binding Cleanup:
- Replaced undocumented compatible strings with proper ones:
* edt,edt-ft5x06 -> edt,edt-ft5206
* marvell,88E1510 -> ethernet-phy-ieee802.3-c22
* karo,imx6qdl-tx6-sgtl5000 -> simple-audio-card
- Fixed incorrect VAR-SOM-MX6UL references (corrected to VAR-SOM-MX6)
- Added missing required properties:
* #phy-cells for usb-nop-xceiv
* #io-channel-cells to ADC nodes
* bus-type for ov5642/ov5640 cameras
* ti,deskew = <0> for ti,tfp410
- Added missing supply properties (power-supply, vdd-supply, dvdd-supply, avdd-supply)
- Removed redundant/empty properties (bus-width for video-mux, empty clock-names)
- Fixed boolean property warnings and non-existent property references
- Converted TS-4800 watchdog to DT schema
- Renamed wdt nodes to watchdog for consistency
New Features Added:
- PCIe Root Port nodes and PERST property for imx6qdl, imx6sx, and imx7d
- OV5645 camera support for imx7d-pico-pi
- LVDS display panel support for imx6ul-var-som
- WiFi and Bluetooth support for VAR-SOM boards
- nvmem-layout support for imx7
- New bus bindings: fsl,aipi-bus and fsl,emi-bus
- New board binding: variscite,var-som-imx6ull
Code Refactoring:
- VAR-SOM-MX6UL/ULL: factored out common parts for CPU variants
- Separated audio, ethernet (ENET1/ENET2), and SD card support into reusable components
* tag 'imx-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: (35 commits)
dt-bindings: soc: imx: Add fsl,aipi-bus and fsl,emi-bus
ARM: dts: freescale: add bootph-all to i.MX7ULP watchdog nodes
ARM: dts: imx7: add nvmem-layout
ARM: dts: imx7d-pico-pi: add OV5645 camera support
ARM: dts: imx6-display5: replace marvell,88E1510 with ethernet-phy-ieee802.3-c22
ARM: dts: imx: replace undocumented compatible string edt,edt-ft5x06 with edt,edt-ft5206
ARM: dts: imx6qdl-tx6: remove undocumented karo,imx6qdl-tx6-sgtl5000 and keep only simple-audio-card
ARM: dts: imx: Add bus-type for ov5642/ov5640
ARM: dts: imx: remove redundant bus-width for video-mux
ARM: dts: imx: add (power|vdd)-supply for related node
ARM: dts: imx53-ppd: add '#phy-cells' for usb-nop-xceiv
ARM: dts: imx53-qsb: add dvdd and avdd supply for panel sii,43wvf1g
ARM: dts: imx: add ti,deskew = <0> for ti,tfp410
ARM: dts: imx7d: Add Root Port node and PERST property
ARM: dts: imx6sx: Add Root Port node and PERST property
ARM: dts: imx6qdl: Add Root Port node and PERST property
ARM: dts: nxp: imx51-ts4800: Rename wdt node to watchdog
dt-bindings: watchdog: Convert TS-4800 to DT schema
ARM: dts: imx6ul: add #io-channel-cells to ADC
ARM: dts: imx25: remove empty clock-names for nand-controller@bb000000
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 7.2, please pull the following:
- Rosen moves the Meraki MX6X pinctrl configuration to the PWM node
where it belongs, also fixes the USB3 GPIO for the R6300v2 and
EA6500v2 routers
- Jinseok fixes a gpio label for the bcm2711 systems (Raspberry Pi 4)
* tag 'arm-soc/for-7.2/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Fix typo in gpio-line-names
ARM: dts: BCM5301X: EA6500v2: fix USB3
ARM: dts: BCM5301X: R6300v2: fix USB3
ARM: dts: NSP: Move MX6X pinctrl config to PWM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
MIPI CSI-2 is supported on the A83T with a dedicated controller that
covers both the protocol and D-PHY. It is connected to the only CSI
receiver with a fwnode graph link. Note that the CSI receiver supports
both this MIPI CSI-2 source and a parallel source.
An empty port with a label for the MIPI CSI-2 sensor input is also
defined for convenience.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260518153339.619947-8-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
aspeed: First batch of ARM devicetree changes for v7.2
New platforms:
- Rainiera6 (Meta)
- SanMiguel (Meta)
Updated platforms:
- Anacapa: SGPIO line names and interrupt configuration
- Clemente: Remove TMP421 nodes
- Kommando: Enable networking via MAC2/MDIO2
- SanMiguel: Line names and interrupt configuration
AST2600 SoC updates:
- Describe PWM/Tach
- Describe I3C controllers
- Reorganise I2C nodes
Other notes:
91b9aed7381c ("ARM: dts: aspeed-g6: Add nodes for i3c controllers") currently
causes a new warning:
... /ahb/apb/bus@1e7a0000/syscon@0: failed to match any schema with compatible: ['aspeed,ast2600-i3c-global', 'syscon']
The patch necessary to address it has an R-b tag from Kryzsztof[2] but as best
I can tell is yet to be applied to the MFD tree. I've left the change in for now
as the warning will resolve once the binding patch is applied.
Lastly, as part of improving support for the Kommando card Anirudh has also
addressed[1] the persistent pain we've had with the phy-mode property for the
AST2600 MACs. Thanks to Andrew Lunn for being on the case for a while now, and
for those who tested Anirudh's patch.
[1]: https://lore.kernel.org/all/20260525-asus-kommando-v3-0-e6a0ca1b4a3e@gmail.com/
[2]: https://lore.kernel.org/all/20260425-poised-accomplished-hyena-d2c1a0@quoll/
* tag 'aspeed-7.2-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: sanmiguel: Fix the CPU_CHIPTHROT linename
ARM: dts: aspeed: sanmiguel: Add IOEXP interrupt pin settings
ARM: dts: aspeed: clemente: Remove IOB NIC TMP421 nodes
ARM: dts: aspeed: Enable networking for Asus Kommando IPMI Card
ARM: dts: aspeed: rainiera6: Add Meta Rainiera6 BMC
dt-bindings: arm: aspeed: Add Meta Rainiera6 board
ARM: dts: aspeed: anacapa: Correct SGPIO names for monitoring
ARM: dts: aspeed: Add Meta SanMiguel BMC
dt-bindings: arm: aspeed: add Meta SanMiguel BMC
ARM: dts: aspeed: g6: Add PWM/Tach controller node
ARM: dts: aspeed: yosemite5: Add MP5998 power monitor
ARM: dts: aspeed: anacapa: Add interrupt properties for PDB PCA9555
ARM: dts: aspeed: msx4: enable BMC networking via MAC0
ARM: dts: aspeed: anacapa: Add JTAG CPLD TRST pin to SGPIO map
ARM: dts: aspeed-g6: Add nodes for i3c controllers
ARM: dts: aspeed-g6: move i2c controllers directly into apb node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 DeviceTree updates
This adds support for the ARMv7 Timer node in the MT6589 SoC
and performs a couple of dtbs_check fixes in MT7623 and in
MT8135 devicetrees.
* tag 'mtk-dts32-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm: dts: mediatek: mt8135: fix pinctrl node name
arm: dts: mediatek: mt7623: fix pinctrl controller node name
arm: dts: mediatek: mt7623: fix pinctrl child node names
arm: dts: mediatek: mt6589: Add Arm Generic Timer node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc7).
Silent conflicts:
net/wireless/nl80211.c
cb9959ab5f99 ("wifi: cfg80211: enforce HE/EHT cap/oper consistency")
a384ae969902 ("wifi: cfg80211: move AP HT/VHT/... operation to beacon info")
https://lore.kernel.org/aiGJDaHV4UlCexIQ@sirena.org.uk
Conflicts:
drivers/net/wireless/intel/iwlwifi/mld/ap.c
a342c99cb70d ("wifi: iwlwifi: mld: honor BSS_CHANGED_BEACON_ENABLED")
9bf1b409afc7 ("wifi: iwlwifi: mld: send tx power constraints before link activation")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
drivers/net/wireless/intel/iwlwifi/pcie/drv.c
093305d801fa ("wifi: iwlwifi: pcie: simplify the resume flow if fast resume is not used")
e2323929a68a ("wifi: iwlwifi: pcie: add debug print for resume flow if powered off")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/airoha/airoha_eth.c
b38cae85d1c4 ("net: airoha: Fix use-after-free in metadata dst teardown")
ec6c391bcca7 ("net: airoha: Introduce airoha_gdm_dev struct")
drivers/net/ethernet/microchip/lan743x_main.c
8173d22b211f ("net: lan743x: permit VLAN-tagged packets up to configured MTU")
e3c6508a46f5 ("net: lan743x: avoid netdev-based logging before netdev registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v7.2
- dt-bindings updates:
- Document compatible for Agilex5 socdk debug daughter card
- Document compatible for Agilex7-M devkit
- Add support for Agilex7-M devkit
- Remove reg property in the PMU on 32-bit SoCFPGA
- Set i3c alias on Agilex3 and Agilex5
- Update data-width of DMA controller on Agilex5
- Set phy-mode to rgmii on Agilex5
- Increase the JFFS2 rootfs partition on the Arria10 NAND SoCDK
* tag 'socfpga_dts_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: arria10: Increase JFFS2 rootfs partition size
dt-bindings: altera: add compatible for agilex5 socdk debug daughter card
arm64: dts: socfpga: agilex5: Fix phy-mode to rgmii as HW provides clock delay
arm64: dts: socfpga: agilex5: update data-width for dmac
arm64: dts: socfpga: agilex3: set alias for i3c controller
arm64: dts: socfpga: agilex5: set alias for i3c controllers
ARM: dts: socfpga: remove the reg property in the pmu
arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit
dt-bindings: arm: altera: document the Agilex7-M devkit
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v7.2, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Enable PHY SSC (Spread Spectrum) on DHCORE DHSBC board.
- Add board pin documentation stm32mp135f-dk to help user.
- STMP32MP15:
- Protonic:
- Update MECIOR0 ans MECIOR1 boards:
- Define ADC channels and GPIO line definitions in board and
no longer in common file.
- Fix ADC sampling.
- STM32MP25:
- Fix SAI addresses.
* tag 'stm32-dt-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: Fix SAI addresses on stm32mp251
ARM: dts: stm32: stm32mp15x-mecio1-io: Move expander gpio-line-names to board files
ARM: dts: stm32: stm32mp15x-mecio1-io: Fix expander gpio line typo
ARM: dts: stm32: stm32mp15x-mecio1-io: Move gpio-line-names to board files
ARM: dts: stm32: stm32mp15x-mecio1-io: Fix GPIO names typo
ARM: dts: stm32: stm32mp15x-mecio1-io: Move divergent mecio1 ADC channels to board files
ARM: dts: stm32: stm32mp15x-mecio1-io: Fix ADC sampling times
ARM: dts: stm32: stm32mp15x-mecio1-io: Enable internal ADC reference
ARM: dts: stm32: add board pin documentation stm32mp135f-dk
ARM: dts: stm32: Enable PHY SSC on DH STM32MP13xx DHCOR DHSBC board
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v7.2-rc1
The bulk of this is various improvements for some of the older ASUS and
LG devices, but there's also support for interconnects on Tegra114 to
help improve memory frequency scaling.
* tag 'tegra-for-7.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tf600t: Invert accelerometer calibration matrix
ARM: tegra: tf600t: Drop backlight regulator
ARM: tegra: tf600t: Configure panel
ARM: tegra: transformers: Add connector node for common trees
ARM: tegra: transformer: Add support for front camera
ARM: tegra: grouper: Add support for front camera
ARM: tegra: p880: Lower CPU thermal limit
ARM: tegra: lg-x3: Set PMIC's RTC address
ARM: tegra: lg-x3: Complete video device graph
ARM: tegra: Configure Tegra114 power domains
ARM: tegra: Add DC interconnections for Tegra114
ARM: tegra: Add EMC OPP and ICC properties to Tegra114 EMC and ACTMON device-tree nodes
ARM: tegra: Add #{address,size}-cells to Chromium-based /firmware
dt-bindings: memory: Document Tegra114 External Memory Controller
dt-bindings: memory: Document Tegra114 Memory Controller
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Gemini device tree updates:
- Add two new devices: the Verbatim Gigabit NAS and the
Raidsonic IB-4210-B, including ACKed binding updates.
- Fix up boot device for the SQ201.
- Use the right LED trigger for disk activity.
- Add the SSP/SPI block to the SoC.
- Fix up the RUT1xx device tree.
* tag 'gemini-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: gemini: Correct the RUT1xx
ARM: dts: Add a Raidsonic IB-4210-B DTS
ARM: dts: Add a Verbatim Gigabit NAS DTS
dt-bindings: arm: Add two missing Gemini devices
dt-bindings: vendor-prefixes: Add Verbatim Corporation
ARM: dts: gemini: Add SSP/SPI block
ARM: dts: gemini: Tag disk led for disk-activity
ARM: dts: gemini: iTian SQ201 need to boot from mtdblock3
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add the bootph-all property to ULP watchdog nodes for i.MX7ULP, ensuring
the watchdog is available during all boot phases.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
|
|
TQMa7 has board-information located in EEPROM at offset 0x20.
Add necessary nodes and properties for nvmem cell.
Signed-off-by: Alexander Feilke <Alexander.Feilke@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Cleanups for RK3288-based ChromeOS platform.
* tag 'v7.2-rockchip-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add #{address,size}-cells to Chromium-based /firmware
ARM: dts: rockchip: Remove invalid properies from rk3288-veyron-analog-audio
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add OV5645 camera device node and enable relevant components in the
video capture data path, so output stream can be captured, and the
camera itself can be controlled over I2C bus.
This is roughly based on descriptions found in downstream kernel tree [1],
adapted to match upstream bindings.
Link: https://github.com/technexion-android/kernel_imx/blob/ce8fd74abf518dac0a09e8dcb37f3496f6375124/arch/arm/boot/dts/imx7d-pico.dtsi#L874 [1]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Replace the vendor-specific PHY compatible string with the generic
ethernet-phy-ieee802.3-c22 compatible.
The marvell,88E1510 compatible is listed in whitelist_phys[] and is
never matched against a PHY driver. PHY devices are expected to use
the generic ethernet-phy-ieee802.3-c22 compatible unless a specific
MDIO driver match is required.
The 88E1510 is compatible with Clause 22 PHY devices, so use the
generic compatible string instead.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dtb: /soc/bus@2100000/ethernet@2188000/mdio/ethernet-phy@0: failed to match any schema with compatible: ['marvell,88E1510']
Known other user (uboot) did not use marvell,88E1510.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
edt,edt-ft5206
The edt,edt-ft5x06 compatible is not referenced in
drivers/input/touchscreen/edt-ft5x06.c and is not documented.
There is no publicly available datasheet or binding information that
distinguishes edt-ft5206/ft5306/ft5406 variants and the driver treats these
FT5x06-family controllers with the same configuration model. So switch to
the lowest common and documented baseline compatible edt,edt-ft5206.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dtb: /soc/bus@60000000/i2c@63fc8000/touchscreen@38: failed to match any schema with compatible: ['edt,edt-ft5x06']
ABI impact consideration:
Not affect Linux kernel. The I2C subsystem uses a legacy fallback mechanism
where it strips the vendor prefix from the compatible string to derive the
client name, resulting in edt-ft5x06
{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
After this, the driver was actively binding to these devices based on the
compatible string.
Known user (U-Boot) does not parse or use edt,edt-ft* touchscreen
compatibles.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
keep only simple-audio-card
Remove the undocumented and unused compatible karo,imx6qdl-tx6-sgtl5000 and
retain only the generic simple-audio-card sound configuration.
The karo,imx6qdl-tx6-sgtl5000 compatible is not documented and is not
referenced by any in-kernel driver. The audio setup is already fully
described using simple-audio-card, which is the standard and supported
binding for this hardware configuration.
No known users (such as uboot) rely on karo,imx6qdl-tx6-sgtl5000.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dtb: /sound: failed to match any schema with compatible: ['karo,imx6qdl-tx6-sgtl5000', 'simple-audio-card']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add bus-type (MEDIA_BUS_TYPE_PARALLEL) for ov5642/ov5640. i.MX53 and
i.MX6UL only supports parallel csi interface. Fix below CHECK_DTBS
warnings:
arm/boot/dts/nxp/imx/imx53-smd.dtb: ov5642@3c (ovti,ov5642): port:endpoint: 'bus-type' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Remove redundant bus-width property according to video-mux.yaml to fix
below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: ipu1_csi0_mux (video-mux): port@4:endpoint: Unevaluated properties are not allowed ('bus-width' was unexpected)
from schema $id: http://devicetree.org/schemas/media/video-mux.yaml
The bus-width already set at remote endpoint (camera).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add required power-supply and vdd-supply properties to fix below CHECK_DTB
warnings:
arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dtb: panel (edt,etm0700g0dh6): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add '#phy-cells' for usb-nop-xceiv to fix below check_dtbs warnings:
usbphy-2 (usb-nop-xceiv): '#phy-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add dvdd and avdd supply and regulators for panel sii,43wvf1g to fix below
check_dtbs warnings:
panel (sii,43wvf1g): 'dvdd-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add required proprety ti,deskew for ti,tfp410, which have not defined
default value in yaml. 0 is default value according to
drivers/gpu/drm/bridge/ti-tfp410.c.
Fix below check_dtbs warning:
dvi-encoder (ti,tfp410): 'ti,deskew' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The Technologic Systems TS-4800 watchdog node was previously named 'wdt',
which violates the core watchdog.yaml schema expecting generic node names.
Rename the node to 'watchdog' to fix the following dtbs_check warning:
'wdt' does not match '^(pmic|timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$'
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v7.1
This update includes:
- a fix for the GMAC DT node on SAM9X7 SoC to properly describe the
available clocks
* tag 'at91-fixes-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Replace "RGMIO_MDC" with "RGMII_MDC" in gpio-line-names.
Signed-off-by: Jinseok Kim <always.starving0@gmail.com>
Link: https://lore.kernel.org/r/20260527103930.2973-1-always.starving0@gmail.com
Fixes: cd87c180b301 ("ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels")
Fixes: ea93ada05c9e ("ARM: dts: Add Raspberry Pi Compute Module 4 IO Board")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
IMU calibration matrix used in the device tree is inverted when testing on
the device which results in wrong screen orientation. Invert it to match
the matrix dumped from the device.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Drop dedicated backlight regulator since the GPIO used in it is actually
SFIO controlling backlight and setting it as GPIO causes backlight to
freeze at maximum level.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Configure DSI panel used in ASUS VivoTab TF600T.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
All ASUS Transformers have micro-HDMI connector directly available. After
Tegra HDMI got bridge/connector support, we should use connector framework
for proper HW description.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add front camera video path. Aptina MI1040 camera is used on all supported
ASUS Transformers, but only TF201 and TF700T will work since on
TF300T/TG/TL front camera is linked through an additional ISP.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add front camera video path.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Lower the CPU thermal limit for the LG P880, since its chassis has less
thermal dissipation capability than the P895.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
LG X3 devices have the PMIC's RTC module located at a non-standard
address. Set the correct address.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add front and rear camera nodes and interlink them with Tegra CSI and VI.
Adjust camera PMIC voltages to better fit requirements and fix the focuser
node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add power domains found in Tegra114 and configure operating-points-v2 for
supported devices accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add DC interconnections to Tegra114 device tree to reflect connections
between MC, EMC and DC.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
device-tree nodes
Add EMC OPP tables and interconnect paths that will be used for dynamic
memory bandwidth scaling based on memory utilization statistics.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:
/ {
firmware {
ranges;
coreboot {
compatible = "coreboot";
reg = <...>;
...;
};
};
};
Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.
Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:
[ 7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
Add appropriate #{address,size}-cells to work around the problem.
Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.
[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
#size-cells for firmware node")
Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
These FIS partition offsets were never right: the comment clearly
states the FIS index is at 0xfe0000 and 0x7f * 0x200000 is
0xfe0000.
Tested on the iTian SQ201.
Fixes: d88b11ef91b1 ("ARM: dts: Fix up SQ201 flash access")
Fixes: b5a923f8c739 ("ARM: dts: gemini: Switch to redboot partition parsing")
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix two problems with the RUT1xx device tree:
- The memory is 32MB not 128MB
- The console is 19200 BPS
- Activate the PCI
- Disable the unused USB ports
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
This adds a device tree for the Raidsonic IB-4210-B NAS, a slightly
under-powered version of IB-4220-B with half the memory and
the cheaper version of the SoC.
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
