| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"These updates came a little late, or were based on a later 6.18-rc tag
than the others:
- A new driver for cache management on cxl devices with memory shared
in a coherent cluster. This is part of the drivers/cache/ tree, but
unlike the other drivers that back the dma-mapping interfaces, this
one is needed only during CPU hotplug.
- A shared branch for reset controllers using swnode infrastructure
- Added support for new SoC variants in the Amlogic soc_device
identification
- Minor updates in Freescale, Microchip, Samsung, and Apple SoC
drivers"
* tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: exynos-pmu: fix device leak on regmap lookup
soc: samsung: exynos-pmu: Fix structure initialization
soc: fsl: qbman: use kmalloc_array() instead of kmalloc()
soc: fsl: qbman: add WQ_PERCPU to alloc_workqueue users
MAINTAINERS: Update email address for Christophe Leroy
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
...
|
|
'for-next/efi-preempt', 'for-next/assembler-macro', 'for-next/typos', 'for-next/sme-ptrace-disable', 'for-next/local-tlbi-page-reused', 'for-next/mpam', 'for-next/acpi' and 'for-next/documentation', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
perf/arm-ni: Fix and optimise register offset calculation
perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs
perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister()
perf/arm-ni: Add NoC S3 support
perf/arm_cspmu: nvidia: Add pmevfiltr2 support
perf/arm_cspmu: nvidia: Add revision id matching
perf/arm_cspmu: Add pmpidr support
perf/arm_cspmu: Add callback to reset filter config
perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores
* for-next/misc:
: Miscellaneous patches
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
arm64: mm: make linear mapping permission update more robust for patial range
arm64/mm: Elide TLB flush in certain pte protection transitions
arm64/mm: Rename try_pgd_pgtable_alloc_init_mm
arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors
arm64: add unlikely hint to MTE async fault check in el0_svc_common
arm64: acpi: add newline to deferred APEI warning
arm64: entry: Clean out some indirection
arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52
arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz()
arm64: remove unused ARCH_PFN_OFFSET
arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack
arm64: Remove assertion on CONFIG_VMAP_STACK
* for-next/kselftest:
: arm64 kselftest patches
kselftest/arm64: Align zt-test register dumps
* for-next/efi-preempt:
: arm64: Make EFI calls preemptible
arm64/efi: Call EFI runtime services without disabling preemption
arm64/efi: Move uaccess en/disable out of efi_set_pgd()
arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper
arm64/fpsimd: Permit kernel mode NEON with IRQs off
arm64/fpsimd: Don't warn when EFI execution context is preemptible
efi/runtime-wrappers: Keep track of the efi_runtime_lock owner
efi: Add missing static initializer for efi_mm::cpus_allowed_lock
* for-next/assembler-macro:
: arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
* for-next/typos:
: Random typo/spelling fixes
arm64: Fix double word in comments
arm64: Fix typos and spelling errors in comments
* for-next/sme-ptrace-disable:
: Support disabling streaming mode via ptrace on SME only systems
kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace
kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
* for-next/local-tlbi-page-reused:
: arm64, mm: avoid TLBI broadcast if page reused in write fault
arm64, tlbflush: don't TLBI broadcast if page reused in write fault
mm: add spurious fault fixing support for huge pmd
* for-next/mpam: (34 commits)
: Basic Arm MPAM driver (more to follow)
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Use long MBWU counters if supported
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Consider overflow in bandwidth counter state
arm_mpam: Track bandwidth counter state for power management
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Add helpers to allocate monitors
arm_mpam: Probe and reset the rest of the features
arm_mpam: Allow configuration to be applied and restored during cpu online
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Register and enable IRQs
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Reset MSC controls from cpuhp callbacks
arm_mpam: Merge supported features during mpam_enable() into mpam_class
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Add helpers for managing the locking around the mon_sel registers
...
* for-next/acpi:
: arm64 acpi updates
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
* for-next/documentation:
: arm64 Documentation updates
Documentation/arm64: Fix the typo of register names
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers-late
standalone cache drivers for v6.19
ccache:
Add a compatible for the pic64gx SoC. No driver change needed, as it
falls back to the PolarFire SoC.
hisi hha/generic cpu cache maintenance:
Add support for a non-architectural mechanism for invalidating memory
regions, needed for some cxl implementations on arm64 (and probably
elsewhere in the future). The HiSilicon Hydra Home Agent is the first
driver to provide this support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'cache-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The generic CPU cache maintenance framework provides a way to register
drivers for devices implementing the underlying support for
cpu_cache_has_invalidate_memregion(). Enable it for arm64 by selecting
GENERIC_CPU_CACHE_MAINTENANCE which provides the implementation for,
and in turn selects, ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The commit e7bafbf717775 ("arm64: mm: Add top-level dispatcher for
internal mem_encrypt API") adds ARCH_HAS_MEM_ENCRYPT. And then the
commit 42be24a4178fe ("arm64: Enable memory encrypt for Realms") adds
duplicate config. Just remove it.
Fixes: 42be24a4178f ("arm64: Enable memory encrypt for Realms")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Probing MPAM is convoluted. MSCs that are integrated with a CPU may
only be accessible from those CPUs, and they may not be online.
Touching the hardware early is pointless as MPAM can't be used until
the system-wide common values for num_partid and num_pmg have been
discovered.
Start with driver probe/remove and mapping the MSC.
Cc: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add code to parse the arm64 specific MPAM table, looking up the cache
level from the PPTT and feeding the end result into the MPAM driver.
This happens in two stages. Platform devices are created first for the
MSC devices. Once the driver probes it calls acpi_mpam_parse_resources()
to discover the RIS entries the MSC contains.
For now the MPAM hook mpam_ris_create() is stubbed out, but will update
the MPAM driver with optional discovered data about the RIS entries.
CC: Carl Worth <carl@os.amperecomputing.com>
Link: https://developer.arm.com/documentation/den0065/3-0bet/?lang=en
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The bulk of the MPAM driver lives outside the arch code because it
largely manages MMIO devices that generate interrupts. The driver
needs a Kconfig symbol to enable it. As MPAM is only found on arm64
platforms, the arm64 tree is the most natural home for the Kconfig
option.
This Kconfig option will later be used by the arch code to enable
or disable the MPAM context-switch code, and to register properties
of CPUs with the MPAM driver.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
CC: Dave Martin <dave.martin@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's good stuff across the board, including some nice mm
improvements for CPUs with the 'noabort' BBML2 feature and a clever
patch to allow ptdump to play nicely with block mappings in the
vmalloc area.
Confidential computing:
- Add support for accepting secrets from firmware (e.g. ACPI CCEL)
and mapping them with appropriate attributes.
CPU features:
- Advertise atomic floating-point instructions to userspace
- Extend Spectre workarounds to cover additional Arm CPU variants
- Extend list of CPUs that support break-before-make level 2 and
guarantee not to generate TLB conflict aborts for changes of
mapping granularity (BBML2_NOABORT)
- Add GCS support to our uprobes implementation.
Documentation:
- Remove bogus SME documentation concerning register state when
entering/exiting streaming mode.
Entry code:
- Switch over to the generic IRQ entry code (GENERIC_IRQ_ENTRY)
- Micro-optimise syscall entry path with a compiler branch hint.
Memory management:
- Enable huge mappings in vmalloc space even when kernel page-table
dumping is enabled
- Tidy up the types used in our early MMU setup code
- Rework rodata= for closer parity with the behaviour on x86
- For CPUs implementing BBML2_NOABORT, utilise block mappings in the
linear map even when rodata= applies to virtual aliases
- Don't re-allocate the virtual region between '_text' and '_stext',
as doing so confused tools parsing /proc/vmcore.
Miscellaneous:
- Clean-up Kconfig menuconfig text for architecture features
- Avoid redundant bitmap_empty() during determination of supported
SME vector lengths
- Re-enable warnings when building the 32-bit vDSO object
- Avoid breaking our eggs at the wrong end.
Perf and PMUs:
- Support for v3 of the Hisilicon L3C PMU
- Support for Hisilicon's MN and NoC PMUs
- Support for Fujitsu's Uncore PMU
- Support for SPE's extended event filtering feature
- Preparatory work to enable data source filtering in SPE
- Support for multiple lanes in the DWC PCIe PMU
- Support for i.MX94 in the IMX DDR PMU driver
- MAINTAINERS update (Thank you, Yicong)
- Minor driver fixes (PERF_IDX2OFF() overflow, CMN register offsets).
Selftests:
- Add basic LSFE check to the existing hwcaps test
- Support nolibc in GCS tests
- Extend SVE ptrace test to pass unsupported regsets and invalid
vector lengths
- Minor cleanups (typos, cosmetic changes).
System registers:
- Fix ID_PFR1_EL1 definition
- Fix incorrect signedness of some fields in ID_AA64MMFR4_EL1
- Sync TCR_EL1 definition with the latest Arm ARM (L.b)
- Be stricter about the input fed into our AWK sysreg generator
script
- Typo fixes and removal of redundant definitions.
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64: cpufeature: Remove duplicate asm/mmu.h header
arm64: Kconfig: Make CPU_BIG_ENDIAN depend on BROKEN
perf/dwc_pcie: Fix use of uninitialized variable
arm/syscalls: mark syscall invocation as likely in invoke_syscall
Documentation: hisi-pmu: Add introduction to HiSilicon V3 PMU
Documentation: hisi-pmu: Fix of minor format error
drivers/perf: hisi: Add support for L3C PMU v3
drivers/perf: hisi: Refactor the event configuration of L3C PMU
drivers/perf: hisi: Extend the field of tt_core
drivers/perf: hisi: Extract the event filter check of L3C PMU
drivers/perf: hisi: Simplify the probe process of each L3C PMU version
drivers/perf: hisi: Export hisi_uncore_pmu_isr()
drivers/perf: hisi: Relax the event ID check in the framework
perf: Fujitsu: Add the Uncore PMU driver
arm64: map [_text, _stext) virtual address range non-executable+read-only
arm64/sysreg: Update TCR_EL1 register
arm64: Enable vmalloc-huge with ptdump
arm64: cpufeature: add Neoverse-V3AE to BBML2 allow list
arm64: errata: Apply workarounds for Neoverse-V3AE
arm64: cputype: Add Neoverse-V3AE definitions
...
|
|
The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).
Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
* for-next/uprobes:
arm64: probes: Fix incorrect bl/blr address and register usage
uprobes: uprobe_warn should use passed task
arm64: Kconfig: Remove GCS restrictions on UPROBES
arm64: uprobes: Add GCS support to uretprobes
arm64: probes: Add GCS support to bl/blr/ret
arm64: uaccess: Add additional userspace GCS accessors
arm64: uaccess: Move existing GCS accessors definitions to gcs.h
arm64: probes: Break ret out from bl/blr
|
|
* for-next/mm:
arm64: map [_text, _stext) virtual address range non-executable+read-only
arm64: Enable vmalloc-huge with ptdump
arm64: mm: split linear mapping if BBML2 unsupported on secondary CPUs
arm64: mm: support large block mapping when rodata=full
arm64: Enable permission change on arm64 kernel block mappings
arm64/Kconfig: Remove CONFIG_RODATA_FULL_DEFAULT_ENABLED
arm64: mm: Rework the 'rodata=' options
arm64: mm: Represent physical memory with phys_addr_t and resource_size_t
arm64: mm: Make map_fdt() return mapped pointer
arm64: mm: Cast start/end markers to char *, not u64
|
|
* for-next/misc:
arm64: Kconfig: Make CPU_BIG_ENDIAN depend on BROKEN
arm64: Kconfig: Spell out "ARMv9.4" in menuconfig text
arm64/fpsimd: simplify sme_setup()
|
|
* for-next/entry:
arm/syscalls: mark syscall invocation as likely in invoke_syscall
arm64: entry: Switch to generic IRQ entry
arm64: entry: Move arm64_preempt_schedule_irq() into __exit_to_kernel_mode()
arm64: entry: Refactor preempt_schedule_irq() check code
entry: Add arch_irqentry_exit_need_resched() for arm64
arm64: entry: Use preempt_count() and need_resched() helper
arm64: entry: Rework arm64_preempt_schedule_irq()
arm64: entry: Refactor the entry and exit for exceptions from EL1
arm64: ptrace: Replace interrupts_enabled() with regs_irqs_disabled()
|
|
Big-endian arm64 configurations are vanishingly rare, yet we still claim
to support them in Linux despite very limited testing or visible
interest. Supporting big-endian adds unnecessary burden to reviewers and
contributors which, without any known active users, is hard to justify.
For example, recent work to improve our futex routines and to implement
nested virtualisation support is non-trivially complicated by having to
support both big- and little-endianness.
Back in 2019 [1], it was claimed that Huawei were using arm64 big-endian
machines in their telecommunication products but I don't know whether
that's still the case and certainly haven't seen any patch contributions
to help support or maintain it.
Make CPU_BIG_ENDIAN depend on BROKEN as an initial deprecation step
towards its removal.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/linux-arm-kernel/73701e9f-bee1-7ae8-2277-7a3576171cd4@huawei.com/ [1]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Neoverse-V3AE is also affected by erratum #3312417, as described in its
Software Developer Errata Notice (SDEN) document:
Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417
https://developer.arm.com/documentation/SDEN-2615521/9-0/
Enable the workaround for Neoverse-V3AE, and document this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now handled by the core automatically once SPARSEMEM_VMEMMAP_ENABLE is
selected.
Link: https://lkml.kernel.org/r/20250901150359.867252-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The menuconfig entries to configure various architectural features are
all formatted as "ARMvx.y architecture features" with the unusual
exception of 9.4, which omits the "ARM" prefix.
Add the "ARM" prefix to the menuconfig entry for the ARMv9.4
architectural features.
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that the uprobe paths have been made GCS compatible
drop the Kconfig restriction.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that 'rodata=full' has been removed in favour of parity with x86,
CONFIG_RODATA_FULL_DEFAULT_ENABLED no longer serves a useful purpose.
Remove it.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, x86, Riscv and Loongarch use the generic entry code, which
makes maintainer's work easier and code more elegant. Start converting
arm64 to use the generic entry infrastructure from kernel/entry/* by
switching it to generic IRQ entry, which removes 100+ lines of duplicate
code. arm64 will completely switch to generic entry in a later series.
The changes are below:
- Remove *enter_from/exit_to_kernel_mode(), and wrap with generic
irqentry_enter/exit() as their code and functionality are almost
identical.
- Define ARCH_EXIT_TO_USER_MODE_WORK and implement
arch_exit_to_user_mode_work() to check arm64-specific thread flags
"_TIF_MTE_ASYNC_FAULT" and "_TIF_FOREIGN_FPSTATE".
So also remove *enter_from/exit_to_user_mode(), and wrap with
generic enter_from/exit_to_user_mode() because they are
exactly the same.
- Remove arm64_enter/exit_nmi() and use generic irqentry_nmi_enter/exit()
because they're exactly the same, so the temporary arm64 version
irqentry_state can also be removed.
- Remove PREEMPT_DYNAMIC code, as generic irqentry_exit_cond_resched()
has the same functionality.
- Implement arch_irqentry_exit_need_resched() with
arm64_preempt_schedule_irq() for arm64 which will allow arm64 to do
its architecture specific checks.
Tested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
All architectures implementing time-related functionality in the vDSO are
using the generic vDSO library which handles time namespaces properly.
Remove the now unnecessary Kconfig symbol.
Enables the use of time namespaces on architectures, which use the
generic vDSO but did not enable GENERIC_VDSO_TIME_NS, namely MIPS and arm.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-10-d9b65750e49f@linutronix.de
|
|
All users of the generic vDSO library also use the generic vDSO datastore.
Remove the now unnecessary Kconfig symbol.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-9-d9b65750e49f@linutronix.de
|
|
This configuration is never used.
Remove it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-8-d9b65750e49f@linutronix.de
|
|
Like many Kconfig symbols, SCHED_{SMT,CLUSTER,MC} are duplicated
across arch/*/Kconfig. Try and clean up a little.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lkml.kernel.org/r/20250826094358.GG3245006@noisy.programming.kicks-ass.net
|
|
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, two sets of always true conditions can be
safely removed in the arm64 Kconfig file.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-4-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracepoint cleanup from Steven Rostedt:
"Remove or hide unused tracepoints
Tracepoints take up memory (around 5K per tracepoint) even when they
are unused. Changes are being made to detect when a tracepoint is
defined but unused and a warning is shown at build. But those changes
are not yet ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config
settings to match the config settings of where they are
instantiated. Some tracepoints were moved into architecture
specific code as only one architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if
statement
The ftrace_test_filter tracepoint which is defined when ftrace
selftests are configured and is used to test the filter logic, but
the tracepoint is not actually called. It is put into an if
statement to not have it get compiled out, but also not warn for
not being used"
* tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: sched: Hide numa events under CONFIG_NUMA_BALANCING
powerpc/thp: tracing: Hide hugepage events under CONFIG_PPC_BOOK3S_64
tracing: Call trace_ftrace_test_filter() for the event
tracing: arm: arm64: Hide trace events ipi_raise, ipi_entry and ipi_exit
binder: Remove unused binder lock events
PM: tracing: Hide power_domain_target event under ARCH_OMAP2PLUS
PM: tracing: Hide device_pm_callback events under PM_SLEEP
PM: tracing: Hide psci_domain_idle events under ARM_PSCI_CPUIDLE
PM: cpufreq: powernv/tracing: Move powernv_throttle trace event
alarmtimer: Hide alarmtimer_suspend event when RTC_CLASS is not configured
tracing, AER: Hide PCIe AER event when PCIEAER is not configured
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops
is registered twice it can mess up the accounting and it will not
work as expected later. Trigger a warning if something registers it
twice as to catch bugs before they are found by things just not
working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very
expensive and only exists to help architectures support ftrace, do
not make it an option. As soon as an architecture supports
DYNAMIC_FTRACE make it use it. This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
redundant with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the
comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.
* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
fgraph: Keep track of when fgraph_ops are registered or not
fgraph: Make pid_str size match the comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
|
|
'for-next/misc', 'for-next/acpi', 'for-next/debug-entry', 'for-next/feat_mte_tagged_far', 'for-next/kselftest', 'for-next/mdscr-cleanup' and 'for-next/vmap-stack', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (23 commits)
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
perf/cxlpmu: Fix typos in cxl_pmu.c comments and documentation
perf/cxlpmu: Remove unintended newline from IRQ name format string
perf/cxlpmu: Fix devm_kcalloc() argument order in cxl_pmu_probe()
perf: arm_spe: Relax period restriction
perf: arm_pmuv3: Add support for the Branch Record Buffer Extension (BRBE)
KVM: arm64: nvhe: Disable branch generation in nVHE guests
arm64: Handle BRBE booting requirements
arm64/sysreg: Add BRBE registers and fields
perf/arm: Add missing .suppress_bind_attrs
perf/arm-cmn: Reduce stack usage during discovery
perf: imx9_perf: make the read-only array mask static const
perf/arm-cmn: Broaden module description for wider interconnect support
...
* for-next/livepatch:
: Support for HAVE_LIVEPATCH on arm64
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: Implement HAVE_LIVEPATCH
arm64: stacktrace: Implement arch_stack_walk_reliable()
arm64: stacktrace: Check kretprobe_find_ret_addr() return value
arm64/module: Use text-poke API for late relocations.
* for-next/user-contig-bbml2:
: Optimise the TLBI when folding/unfolding contigous PTEs on hardware with BBML2 and no TLB conflict aborts
arm64/mm: Elide tlbi in contpte_convert() under BBML2
iommu/arm: Add BBM Level 2 smmu feature
arm64: Add BBM Level 2 cpu feature
arm64: cpufeature: Introduce MATCH_ALL_EARLY_CPUS capability type
* for-next/misc:
: Miscellaneous arm64 patches
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: signal: Remove ISB when resetting POR_EL0
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
arm64: fix unnecessary rebuilding when CONFIG_DEBUG_EFI=y
arm64/mm: Optimize loop to reduce redundant operations of contpte_ptep_get
arm64: pi: use 'targets' instead of extra-y in Makefile
* for-next/acpi:
: Various ACPI arm64 changes
ACPI: Suppress misleading SPCR console message when SPCR table is absent
ACPI: Return -ENODEV from acpi_parse_spcr() when SPCR support is disabled
* for-next/debug-entry:
: Simplify the debug exception entry path
arm64: debug: remove debug exception registration infrastructure
arm64: debug: split bkpt32 exception entry
arm64: debug: split brk64 exception entry
arm64: debug: split hardware watchpoint exception entry
arm64: debug: split single stepping exception entry
arm64: debug: refactor reinstall_suspended_bps()
arm64: debug: split hardware breakpoint exception entry
arm64: entry: Add entry and exit functions for debug exceptions
arm64: debug: remove break/step handler registration infrastructure
arm64: debug: call step handlers statically
arm64: debug: call software breakpoint handlers statically
arm64: refactor aarch32_break_handler()
arm64: debug: clean up single_step_handler logic
* for-next/feat_mte_tagged_far:
: Support for reporting the non-address bits during a synchronous MTE tag check fault
kselftest/arm64/mte: Add mtefar tests on check_mmap_options
kselftest/arm64/mte: Refactor check_mmap_option test
kselftest/arm64/mte: Add verification for address tag in signal handler
kselftest/arm64/mte: Add address tag related macro and function
kselftest/arm64/mte: Check MTE_FAR feature is supported
kselftest/arm64/mte: Register mte signal handler with SA_EXPOSE_TAGBITS
kselftest/arm64: Add MTE_FAR hwcap test
KVM: arm64: Expose FEAT_MTE_TAGGED_FAR feature to guest
arm64: Report address tag when FEAT_MTE_TAGGED_FAR is supported
arm64/cpufeature: Add FEAT_MTE_TAGGED_FAR feature
* for-next/kselftest:
: Kselftest updates for arm64
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
kselftest/arm4: Provide local defines for AT_HWCAP3
kselftest/arm64: Specify SVE data when testing VL set in sve-ptrace
kselftest/arm64: Fix test for streaming FPSIMD write in sve-ptrace
kselftest/arm64: Fix check for setting new VLs in sve-ptrace
kselftest/arm64: Convert tpidr2 test to use kselftest.h
* for-next/mdscr-cleanup:
: Drop redundant DBG_MDSCR_* macros
KVM: selftests: Change MDSCR_EL1 register holding variables as uint64_t
arm64/debug: Drop redundant DBG_MDSCR_* macros
* for-next/vmap-stack:
: Force VMAP_STACK on arm64
arm64: remove CONFIG_VMAP_STACK checks from entry code
arm64: remove CONFIG_VMAP_STACK checks from SDEI stack handling
arm64: remove CONFIG_VMAP_STACK checks from stacktrace overflow logic
arm64: remove CONFIG_VMAP_STACK conditionals from traps overflow stack
arm64: remove CONFIG_VMAP_STACK conditionals from irq stack setup
arm64: Remove CONFIG_VMAP_STACK conditionals from THREAD_SHIFT and THREAD_ALIGN
arm64: efi: Remove CONFIG_VMAP_STACK check
arm64: Mandate VMAP_STACK
arm64: efi: Fix KASAN false positive for EFI runtime stack
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
|
|
The ipi tracepoints are mostly generic, but the tracepoints ipi_raise,
ipi_entry and ipi_exit are only used by arm and arm64. This means these
trace events are wasting memory in all the other architectures that do not
use them.
Add CONFIG_HAVE_EXTRA_IPI_TRACEPOINTS and have arm and arm64 select it to
enable these trace events. The config makes it easy if other architectures
decide to trace these as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250722103714.64eba013@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Ftrace is tightly coupled with architecture specific code because it
requires the use of trampolines written in assembly. This means that when
a new feature or optimization is made, it must be done for all
architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are
added to denote which architecture has the new enhancement so that other
architectures can still function until they too have been updated.
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant
with the HAVE_DYNAMIC_FTRACE.
Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where
applicable.
Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Recent patches selecting HAVE_RELIABLE_STACKTRACE and HAVE_LIVEPATCH
added them to the end of the ARM64 Kconfig select list. Move them around
to keep this list nearly alphabetically ordered.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Now that DAX and all other reference counts to ZONE_DEVICE pages are
managed normally there is no need for the special devmap PTE/PMD/PUD page
table bits. So drop all references to these, freeing up a software
defined page table bit on architectures supporting it.
Link: https://lkml.kernel.org/r/6389398c32cc9daa3dfcaa9f79c7972525d310ce.1750323463.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Will Deacon <will@kernel.org> # arm64
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Inki Dae <m.szyprowski@samsung.com>
Cc: John Groves <john@groves.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Enable GICv5 driver code for the ARM64 architecture.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-31-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
On arm64, VMAP_STACK has been enabled by default for a while now, and
the only reason to disable it was a historical lack of support for
KASAN_VMALLOC. Today there's no good reason to disable VMAP_STACK.
Mandate VMAP_STACK, which will allow code to be simplified in
subsequent patches.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-1-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Aneesh reports that his kernel fails to boot in nVHE mode with
KVM's protected mode enabled. Further investigation by Mostafa
reveals that this fails because CONFIG_JUMP_LABEL=n and that
we have static keys shared between EL1 and EL2.
While this can be worked around, it is obvious that we have long
relied on having CONFIG_JUMP_LABEL enabled at all times, as all
supported compilers now have 'asm goto' (which is the basic block
for jump labels).
Let's simplify our lives once and for all by mandating jump labels.
It's not like anyone else is testing anything without them, and
we already rely on them for other things (kfence, xfs, preempt).
Link: https://lore.kernel.org/r/yq5ah60pkq03.fsf@kernel.org
Reported-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250613141936.2219895-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allocate a task flag used to represent the patch pending state for the
task. When a livepatch is being loaded or unloaded, the livepatch code
uses this flag to select the proper version of a being patched kernel
functions to use for current task.
In arch/arm64/Kconfig, select HAVE_LIVEPATCH and include proper Kconfig.
This is largely based on [1] by Suraj Jitindar Singh.
[1] https://lore.kernel.org/all/20210604235930.603-1-surajjs@amazon.com/
Cc: Suraj Jitindar Singh <surajjs@amazon.com>
Cc: Torsten Duwe <duwe@suse.de>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Breno Leitao <leitao@debian.org>
Tested-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250630174502.842486-1-song@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Move the arm64-optimized CRC code from arch/arm64/lib/crc* into its new
location in lib/crc/arm64/, and wire it up in the new way. This new way
of organizing the CRC code eliminates the need to artificially split the
code for each CRC variant into separate arch and generic modules,
enabling better inlining and dead code elimination. For more details,
see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/".
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20250607200454.73587-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add arch_stack_walk_reliable(), which will be used during kernel live
patching to detect when threads have completed executing old versions of
functions.
Note that arch_stack_walk_reliable() only needs to guarantee that it
returns an error code when it cannot provide a reliable stacktrace. It
is not required to provide a reliable stacktrace in all scenarios so
long as it returns said error code.
At present we can only reliably unwind up to an exception boundary. In
future we should be able to improve this with additional data from the
compiler (e.g. sframe).
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250320171559.3423224-2-song@kernel.org
[ Mark: Simplify logic, clarify commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
