summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/freescale
AgeCommit message (Collapse)Author
2025-10-01Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC dt updates from Arnd Bergmann: "There are five sets of new SoCs that get added in existing families, all of them being either upgrades or cut-down versions of the older chips: - Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of high-end workstations and laptops from Apple. Linux has been working on these for a while but stil requires patches. - Axis Artpec8 is an Armv8 chip based on Samsung Exynos design, unlike the earlier Armv7 Artpec6 from the same company that was part of a separate family of chips. - NXP i.MX91 is a cut-down version of i.MX93, using only a single Cortex-A55 core. - Qualcomm Lemans Auto is a variant of the Lemans SoC that was originally merged under the sa8775p name, the differences being mostly the firmware configuration of the platform. - Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44), RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded SoCs based on Cortex-A55 cores In total, there are 65 new machines, including: - Industrial embedded system and single-board computers based on NXP, Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips. - Reference boards for the newly added Renesas, Qualcomm, NXP and Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC - Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1 chips. - Several Samsung phones using Qualcomm Snapdragon chips - Set-top boxes based on Allwinner H313 - Five BMC boards using 32-bit ASpeed SoCs - Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708 (ARMv7) SoCs Two machines get phased out because they were available only in small quantities but never made it into products: one STi407 based reference board, and a Snapdragon 845 based Chromebook. Aside from the newly added machines, a lot of work went into improving hardware support on the existing machines and cleaning up contents for validation" * tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits) arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node ARM: dts: microchip: sam9x7: Add qspi controller arm64: dts: qcom: Add MST pixel streams for displayport arm64: dts: qcom: sm6350: correct DP compatibility strings arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300: Add gpu and gmu nodes arm64: dts: allwinner: h313: Add Amediatech X96Q dt-bindings: arm: sunxi: Add Amediatech X96Q arm64: dts: apple: t8015: Add SPMI node arm64: dts: apple: t8012: Add SPMI node arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT arm64: dts: rockchip: update pinctrl names for Radxa E52C arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C arm64: dts: apple: Add J474s, J475c and J475d device trees arm64: dts: apple: Add J414 and J416 Macbook Pro device trees arm64: dts: apple: Add initial t6020/t6021/t6022 DTs ...
2025-09-14arm64: dts: s32g: Add device tree information for the OCOTP driverDan Carpenter
Add the device tree information for the S32G On Chip One-Time Programmable Controller (OCOTP) chip. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-14arm64: dts: add description for solidrun imx8mp hummingboard variantsJosua Mayer
Add descriptions for the SolidRun i.MX8M Plus System on Module based HummingBoard product-line. They share a common designed based on the "Pulse" version, defined by various assembly options. The HummingBoard Pulse features: - 2x RJ45 Ethernet - 2x USB-3.0 Type A - HDMI connector - mini-HDMI connector - microSD connector - mini-PCI-E connector with SIM slot supporting USB-2.0/3.0 interfaces - M.2 connector with SIM slot supporting USB-2.0/3.0 interfaces - MIPI-CSI Camera Connector (not described without specific camera) - 3.5mm Analog Stereo Out / Microphone In Headphone Jack - RTC with backup battery The variants Mate and Ripple are reduced versions of Pulse. The HummingBoard Pro extends Pulse with PCI-E on M.2 connector. Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mm-phycore-som: optimize drive strenghJan Remmet
Reduce ENET pin drive strength from X6 to X4 to optimize signal quality and reduce potential signal integrity issues. Signed-off-by: Jan Remmet <j.remmet@phytec.de> Reviewed-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: freescale: imx93-phycore-som: Remove "fsl,magic-packet"Primoz Fiser
FEC WoL (Wake-on-Lan) functionality depends on using Ethernet PHY in IRQ mode. However, on phyCORE-i.MX93 SoM, polling mode is used instead for the FEC Ethernet PHY. Consequently, WoL is non-functional. Thus disable it by removing "fsl,magic-packet" property. This allows us to save some power during device suspend as PHY is not kept awake. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: freescale: imx93-phyboard-nash: Current sense via iio-hwmonPrimoz Fiser
Commit 21179eae56de ("arm64: dts: freescale: imx93-phyboard-nash: Add current sense amplifier") added information about the current sensing circuitry found on the board. Now, lets provide current sense reading also via IIO-hwmon subsystem. This way, SoM current can be read directly via sysfs property more conveniently for the customers. No need for them to manually apply scaling factor calculations anymore. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mp: Correct thermal sensor indexPeng Fan
The TMU has two temperature measurement sites located on the chip. The probe 0 is located inside of the ANAMIX, while the probe 1 is located near the ARM core. This has been confirmed by checking with HW design team and checking RTL code. So correct the {cpu,soc}-thermal sensor index. Fixes: 30cdd62dce6b ("arm64: dts: imx8mp: Add thermal zones support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx95: add standard PCI device compatible string to NETC TimerWei Fang
PCI devices should have a compatible string based on the vendor and device IDs. So add this compatible string to NETC Timer. Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: freescale: add initial device tree for TQMa91xx/MBa91xxCAAlexander Stein
This adds support for TQMa91xx module attached to MBa91xxCA board. TQMa91xx is a SOM series using i.MX91 SOC. The SOM features PMIC, RAM, e-MMC and some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and secure element. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx93-11x11-evk: remove fec property eee-broken-1000tJoy Zou
The 'eee-broken-1000t' flag disables Energy-Efficient Ethernet (EEE) on 1G links as a workaround for PTP sync issues on older i.MX6 platforms. Remove it since the i.MX93 have not such issue. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: freescale: add i.MX91 11x11 EVK basic supportJoy Zou
Add i.MX91 11x11 EVK board support. - Enable ADC1. - Enable lpuart1 and lpuart5. - Enable network eqos and fec. - Enable I2C bus and children nodes under I2C bus. - Enable USB and related nodes. - Enable uSDHC1 and uSDHC2. - Enable Watchdog3. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx91: add i.MX91 dtsi supportJoy Zou
The i.MX 91 family features an Arm Cortex-A55 running at up to 1.4GHz, support for modern LPDDR4 memory to enable platform longevity, along with a rich set of peripherals targeting medical, industrial and consumer IoT market segments. The mainly difference between i.MX91 and i.MX93 is as follows: - i.MX91 removed some clocks and modified the names of some clocks. - i.MX91 only has one A core. - i.MX91 has different pinmux. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: freescale: rename imx93.dtsi to imx91_93_common.dtsi and modify themJoy Zou
The design of i.MX91 platform is very similar to i.MX93 and only some small differences. If the imx91.dtsi include the imx93.dtsi, each add to imx93.dtsi requires an remove in imx91.dtsi for this unique to i.MX93, e.g. NPU. The i.MX91 isn't the i.MX93 subset, if the imx93.dtsi include the imx91.dtsi, the same problem will occur. Common + delta is better than common - delta, so add imx91_93_common.dtsi for i.MX91 and i.MX93, then the imx93.dtsi and imx91.dtsi will include the imx91_93_common.dtsi. Rename imx93.dtsi to imx91_93_common.dtsi and move i.MX93 specific part from imx91_93_common.dtsi to imx93.dtsi. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: freescale: move aliases from imx93.dtsi to board dtsJoy Zou
The aliases is board level property rather than soc property, so move these to each boards. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: lx2160a-clearfog-itx: enable pcie nodes for x4 and x8 slotsJosua Mayer
SolidRun Clearfog CX and Honeycomb have LX2160A PEX3 and PEX5 exposed on physical connectors. Vendor U-Boot used to patch status properties such that it went undiscovered these nodes have their status set disabled. Set status okay for pcie3 and pcie5 nodes. Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: lx2160a-cex7: add interrupts for rtc and ethernet phyJosua Mayer
SolidRun LX2160A CEX-7 module has interrupts wired for both the rtc and ethernet phy. Add description for those interrupts to the rtc and phy nodes. Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: add description for solidrun imx8mp som and cubox-mJosua Mayer
Add description for the SolidRun i.MX8M Plus based System on Module, and the CuBox-M. The SoM features: - 2x 1Gbps Ethernet with PHY - eMMC - 1/2/3/8GB DDR - MIPI-CSI Camera Connector (not described without specific camera) The CuBox-M is a complete product with enclosure featuring: - 1x 1Gbps RJ45 Ethernet Port - 2x USB-3.0 Type A - HDMI connector - microSD connector - microUSB connector for console (using fdtdi chip) - IR receiver - RTC with backup battery Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8: Use GIC_SPI for interrupt-map for readabilityKrzysztof Kozlowski
Decoding interrupt-map is tricky, because it consists of five components. Use known GIC_SPI define in final interrupt specifier component makes easier to read. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8qxp: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: imx8-ss-hsio.dtsi:71.3-74.28: Warning (interrupt_map): /bus@5f000000/pcie@5f010000:interrupt-map: Missing property '#address-cells' in node /interrupt-controller@51a00000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8qm: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: imx8qm-ss-hsio.dtsi:83.3-86.28: Warning (interrupt_map): /bus@5f000000/pcie@5f010000:interrupt-map: Missing property '#address-cells' in node /interrupt-controller@51a00000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mq: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: imx8mq.dtsi:1746.4-1749.43: Warning (interrupt_map): /soc@0/pcie@33800000:interrupt-map: Missing property '#address-cells' in node /soc@0/interrupt-controller@38800000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mp: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: imx8mp.dtsi:2184.4-2187.29: Warning (interrupt_map): /soc@0/pcie@33800000:interrupt-map: Missing property '#address-cells' in node /soc@0/interrupt-controller@38800000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mm: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: imx8mm.dtsi:1355.4-1358.29: Warning (interrupt_map): /soc@0/pcie@33800000:interrupt-map: Missing property '#address-cells' in node /soc@0/interrupt-controller@38800000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8dxl: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: imx8dxl-ss-hsio.dtsi:45.3-48.27: Warning (interrupt_map): /bus@5f000000/pcie@5f010000:interrupt-map: Missing property '#address-cells' in node /interrupt-controller@51a00000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: fsl-ls1046a: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: fsl-ls1046a.dtsi:334.5-346.26: Warning (interrupt_map): /soc/scfg@1570000/interrupt-controller@1ac:interrupt-map: Missing property '#address-cells' in node /interrupt-controller@1400000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: fsl-ls1043a: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: fsl-ls1043a.dtsi:330.5-342.26: Warning (interrupt_map): /soc/scfg@1570000/interrupt-controller@1ac:interrupt-map: Missing property '#address-cells' in node /interrupt-controller@1400000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: fsl-ls1012a: Add default GIC address cellsKrzysztof Kozlowski
Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: fsl-ls1012a.dtsi:548.4-551.32: Warning (interrupt_map): /soc/pcie@3400000:interrupt-map: Missing property '#address-cells' in node /interrupt-controller@1400000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component "parent unit address", which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: freescale: imx8mp-moduline-display-106: Use phys to replace ↵Maud Spierings
xceiver-supply Fix the can tranceivers to actually use the new phy description instead of the regulator tweak. Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mp: Add TechNexion EDM-G-IMX8M-PLUS SOM on WB-EDM-G carrier ↵Richard Hu
board Add support for TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board. Key interfaces include: - Gigabit Ethernet - USB 3.0 - I2S, UART, SPI, I2C, PWM, GPIO Signed-off-by: Richard Hu <richard.hu@technexion.com> Signed-off-by: Ray Chang <ray.chang@technexion.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mp: add interconnect for lcdif-hdmiMarco Felsch
Add the missing interconnect for the lcdif-hdmi. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx95: Add msi-map for pci-ep deviceFrank Li
Add msi-map for pci-ep device. Acked-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11arm64: dts: imx8mp: Add pclk clock and second power domain for the ISPLaurent Pinchart
The ISP HDR stitching registers are clocked by the pixel clock, which is gated by the MIPI_CSI2 power domain. Attempting to access those registers with the clock off locks up the system. Fix this by adding the pclk clock and the MIPI_CSI2 secondary power domain. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: add fsl,phy-tx-vref-tune-percent tuning properties for ↵Xu Yang
USB3 PHY Add it to improve USB signal quality. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: Fix JPEG encoder node assigned clockMarek Vasut
The assigned clock for JPEG encoder IP has to be IMX95_CLK_VPUBLK_JPEG_ENC and not IMX95_CLK_VPUBLK_JPEG_DEC (_ENC at the end, not _DEC). This is a simple copy-paste error, fix it. Fixes: 153c039a7357 ("arm64: dts: imx95: add jpeg encode and decode nodes") Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: freescale: Minor whitespace cleanupKrzysztof Kozlowski
The DTS code coding style expects exactly one space around '=' or '{' characters. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2Haibo Chen
1, the phy support up to 8Mbit/s databitrate for CAN FD. refer to product data sheet: https://www.nxp.com/docs/en/data-sheet/TJA1463.pdf 2, the standby pin of the phy is ACTIVE_LOW. 3, the phy of flexcan2 connect the standby/en pin to PCAL6408 on i2c4 bus. Fixes: 02b7adb791e1 ("arm64: dts: imx95-19x19-evk: add adc0 flexcan[1,2] i2c[2,3] uart5 spi3 and tpm3") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95-15x15-evk: Change pinctrl settings for usdhc2Luke Wang
The drive strength is too high for SDR104 mode. Change the drive strength to X3 as hardware team recommends. Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95-19x19-evk: Add pf09 and pf53 thermal zonesPeng Fan
System Manager supports reading out pf09 and pf53 temperature and SCMI Agent could get the values through SCMI sensor protocol. So add the nodes to allow Linux to get the temperature. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95-19x19-evk: Add pca9632 nodePeng Fan
Add an I2C controlled 4-bit LED driver PCA9632 under lpi2c3. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95-19x19-evk: Add Tsettle delay in m2 regulatorRichard Zhu
M.2 device only can be enabled after all Power Rails reach their minimum operating voltage (PCI Express M.2 Specification r5.1 3.1.4 Power-up Timing). Set a delay equal to the max value of Tsettle in m2 regulator. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95-evk: Update aliasPeng Fan
Add i2c, gpio, mmc, serial alias for 15x15 EVK and add lpuart5 serial alias for 19x19 EVK. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: Add coresight nodesPeng Fan
Add etf, etm, etr, funnel nodes for coresight. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: Add OCOTP nodePeng Fan
Add OCOTP node to allow reading fuse using nvmem API Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: Add more V2X MUsPeng Fan
Add more MUs for V2X communication Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: Add LMM/CPU nodesPeng Fan
Add SCMI LMM and CPU nodes for managing Logical Machine and CPU. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: Add System Counter nodePeng Fan
Add System Counter node to support cpuidle when arm generic timer stops Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx95: Correct the lpuart7 and lpuart8 srcidJoy Zou
According to the imx95 RM, the lpuart7 rx and tx DMA's srcid are 88 and 87, and the lpuart8 rx and tx DMA's srcid are 90 and 89. So correct them. Fixes: 915fd2e127e8 ("arm64: dts: imx95: add edma[1..3] nodes") Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: freescale: Switch to hp-det-gpiosGeert Uytterhoeven
Replace the deprecated "hp-det-gpio" property by "hp-det-gpios" in Freescale Generic ASoC Sound Card device nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx8dxl-ss-conn: Disable USB3 nodesAlexander Dahl
The i.MX 8DualXLite/8SoloXLite has a different connectivity memory map than the generic i.MX8 has. One conflicting resource is usb, where the imx8dxl has a second usb2 phy @5b110000, while the generic imx8 dtsi has one usb2 phy and one usb3 phy, and the usb3otg @5b110000. When including both imx8dxl-ss-conn.dtsi and imx8-ss-conn.dtsi as done in imx8dxl.dtsi this leads to a duplicate unit-address warning. The usb3otg node was introduced after the initial imx8dxl support with commit a8bd7f155126 ("arm64: dts: imx8qxp: add cadence usb3 support") and since then leads to warnings like this (when built with W=2): DTC arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb …/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi:148.24-182.4: Warning (unique_unit_address): /bus@5b000000/usb@5b110000: duplicate unit-address (also used in node /bus@5b000000/usbphy@5b110000) also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4 also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3 Delete usb3 related nodes at dxl to fix above warning. Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus ↵Marek Vasut
eDM SBC Add missing microSD slot vqmmc-supply property, otherwise the kernel might shut down LDO5 regulator and that would power off the microSD card slot, possibly while it is in use. Add the property to make sure the kernel is aware of the LDO5 regulator which supplies the microSD slot and keeps the LDO5 enabled. Fixes: 562d222f23f0 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC") Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-16 20:11:55 +0000