| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
The only user of PCBC mode (Propagating Cipher Block Chaining mode) was
net/rxrpc/rxkad.c, which now uses local code instead.
While PCBC was an interesting cryptographic experiment, it has largely
been relegated to the history books and academic exercises. It is
non-parallelizable (i.e., very slow) and doesn't actually achieve the
integrity properties it was apparently intended to achieve.
Remove support for it from the crypto API.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the insecure FCrypt block cipher from the crypto API. Its only
user was net/rxrpc/, but now net/rxrpc/ implements it locally. The
crypto API implementation is no longer needed.
For some additional context: FCrypt was designed in 1988 and is
essentially a weakened version of DES. It has the same 56-bit key size
as DES, which is easily brute forced. Moreover, it's cryptographically
weak and doesn't even provide the intended 56-bit security level. Its
author considers it to be a mistake, as well
(https://lists.openafs.org/pipermail/openafs-devel/2000-December/005320.html).
But fortunately this 1980s-era homebrew block cipher was never adopted
outside of net/rxrpc/. So its code can just be kept there.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the support for HASH_DRBG. It's likely unused code, seeing as
HMAC_DRBG is always enabled and prioritized over it unless
NETLINK_CRYPTO is used to change the algorithm priorities.
There's also no compelling reason to support more than one of
[HMAC_DRBG, HASH_DRBG, CTR_DRBG]. By definition, callers cannot tell
any difference in their outputs. And all are FIPS-certifiable, which is
the only point of the kernel's NIST DRBGs anyway.
Switching to HASH_DRBG doesn't seem all that compelling, either. For
one, it's more complex than HMAC_DRBG.
Thus, let's just drop HASH_DRBG support and focus on HMAC_DRBG.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the support for CTR_DRBG. It's likely unused code, seeing as
HMAC_DRBG is always enabled and prioritized over it unless
NETLINK_CRYPTO is used to change the algorithm priorities.
There's also no compelling reason to support more than one of
[HMAC_DRBG, HASH_DRBG, CTR_DRBG]. By definition, callers cannot tell
any difference in their outputs. And all are FIPS-certifiable, which is
the only point of the kernel's NIST DRBGs anyway.
Switching to CTR_DRBG doesn't seem all that compelling, either. While
it's often the fastest NIST DRBG, it has several disadvantages:
- CTR_DRBG uses AES. Some platforms don't have AES acceleration at all,
causing a fallback to the table-based AES code which is very slow and
can be vulnerable to cache-timing attacks. In contrast, HMAC_DRBG
uses primitives that are consistently constant-time.
- CTR_DRBG is usually considered to be somewhat less cryptographically
robust than HMAC_DRBG. Granted, HMAC_DRBG isn't all that great
either, e.g. given the negative result from Woodage & Shumow (2018)
(https://eprint.iacr.org/2018/349.pdf), but that can be worked around.
- CTR_DRBG is more complex than HMAC_DRBG, risking bugs. Indeed, while
reviewing the CTR_DRBG code, I found two bugs, including one where it
can return success while leaving the output buffer uninitialized.
- The kernel's implementation of CTR_DRBG uses an "ctr(aes)"
crypto_skcipher and relies on it returning the next counter value.
That's fragile, and indeed historically many "ctr(aes)"
crypto_skcipher implementations haven't done that. E.g. see
commit 511306b2d075 ("crypto: arm/aes-ce - update IV after partial final CTR block"),
commit fa5fd3afc7e6 ("crypto: arm64/aes-blk - update IV after partial final CTR block"),
commit 371731ec2179 ("crypto: atmel-aes - Fix saving of IV for CTR mode"),
commit 25baaf8e2c93 ("crypto: crypto4xx - fix ctr-aes missing output IV"),
commit 334d37c9e263 ("crypto: caam - update IV using HW support"),
commit 0a4491d3febe ("crypto: chelsio - count incomplete block in IV"),
commit e8e3c1ca57d4 ("crypto: s5p - update iv after AES-CBC op end").
I.e., there were many years where the kernel's CTR_DRBG code (if it
were to have actually been used) repeated outputs on some platforms.
AES-CTR also uses a 128-bit counter, which creates overflow edge cases
that are sometimes gotten wrong. E.g. see commit 009b30ac7444
("crypto: vmx - CTR: always increment IV as quadword").
So, while switching to CTR_DRBG for performance reasons isn't completely
out of the question (notably BoringSSL uses it), it would take quite a
bit more work to create a solid implementation of it in the kernel,
including a more solid implementation of AES-CTR itself (in lib/crypto/,
with a scalar bit-sliced fallback, etc). Since HMAC_DRBG has always
been the default NIST DRBG variant in the kernel and is in a better
state, let's just standardize on it for now.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used. Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.
It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
Remove ansi_cprng, since it's obsolete and unused, as confirmed at
https://lore.kernel.org/r/aQxpnckYMgAAOLpZ@gondor.apana.org.au/
This was originally added in 2008, apparently as a FIPS approved random
number generator. Whether this has ever belonged upstream is
questionable. Either way, ansi_cprng is no longer usable for this
purpose, since it's been superseded by the more modern algorithms in
crypto/drbg.c, and FIPS itself no longer allows it. (NIST SP 800-131A
Rev 1 (2015) says that RNGs based on ANSI X9.31 will be disallowed after
2015. NIST SP 800-131A Rev 2 (2019) confirms they are now disallowed.)
Therefore, there is no reason to keep it around.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There is no reason for people configuring the kernel to be asked about
CRYPTO_MANAGER, so make it a hidden symbol.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the "crct10dif" shash algorithm from the crypto API. It has no
known user now that the lib is no longer built on top of it. It has no
remaining references in kernel code. The only other potential users
would be the usual components that allow specifying arbitrary hash
algorithms by name, namely AF_ALG and dm-integrity. However there are
no indications that "crct10dif" is being used with these components.
Debian Code Search and web searches don't find anything relevant, and
explicitly grepping the source code of the usual suspects (cryptsetup,
libell, iwd) finds no matches either. "crc32" and "crc32c" are used in
a few more places, but that doesn't seem to be the case for "crct10dif".
crc_t10dif_update() is also tested by crc_kunit now, so the test
coverage provided via the crypto self-tests is no longer needed.
Also note that the "crct10dif" shash algorithm was inconsistent with the
rest of the shash API in that it wrote the digest in CPU endianness,
making the resulting byte array differ on little endian vs. big endian
platforms. This means it was effectively just built for use by the lib
functions, and it was not actually correct to treat it as "just another
hash function" that could be dropped in via the shash API.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250206173857.39794-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The keywrap (kw) algorithm has no in-tree user. It has never had an
in-tree user, and the patch that added it provided no justification for
its inclusion. Even use of it via AF_ALG is impossible, as it uses a
weird calling convention where part of the ciphertext is returned via
the IV buffer, which is not returned to userspace in AF_ALG.
It's also unclear whether any new code in the kernel that does key
wrapping would actually use this algorithm. It is controversial in the
cryptographic community due to having no clearly stated security goal,
no security proof, poor performance, and only a 64-bit auth tag. Later
work (https://eprint.iacr.org/2006/221) suggested that the goal is
deterministic authenticated encryption. But there are now more modern
algorithms for this, and this is not the same as key wrapping, for which
a regular AEAD such as AES-GCM usually can be (and is) used instead.
Therefore, remove this unused code.
There were several special cases for this algorithm in the self-tests,
due to its weird calling convention. Remove those too.
Cc: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the vmac64 template, as it has no known users. It also continues
to have longstanding bugs such as alignment violations (see
https://lore.kernel.org/r/20241226134847.6690-1-evepolonium@gmail.com/).
This code was added in 2009 by commit f1939f7c5645 ("crypto: vmac - New
hash algorithm for intel_txt support"). Based on the mention of
intel_txt support in the commit title, it seems it was added as a
prerequisite for the contemporaneous patch
"intel_txt: add s3 userspace memory integrity verification"
(https://lore.kernel.org/r/4ABF2B50.6070106@intel.com/). In the design
proposed by that patch, when an Intel Trusted Execution Technology (TXT)
enabled system resumed from suspend, the "tboot" trusted executable
launched the Linux kernel without verifying userspace memory, and then
the Linux kernel used VMAC to verify userspace memory.
However, that patch was never merged, as reviewers had objected to the
design. It was later reworked into commit 4bd96a7a8185 ("x86, tboot:
Add support for S3 memory integrity protection") which made tboot verify
the memory instead. Thus the VMAC support in Linux was never used.
No in-tree user has appeared since then, other than potentially the
usual components that allow specifying arbitrary hash algorithms by
name, namely AF_ALG and dm-integrity. However there are no indications
that VMAC is being used with these components. Debian Code Search and
web searches for "vmac64" (the actual algorithm name) do not return any
results other than the kernel itself, suggesting that it does not appear
in any other code or documentation. Explicitly grepping the source code
of the usual suspects (libell, iwd, cryptsetup) finds no matches either.
Before 2018, the vmac code was also completely broken due to using a
hardcoded nonce and the wrong endianness for the MAC. It was then fixed
by commit ed331adab35b ("crypto: vmac - add nonced version with big
endian digest") and commit 0917b873127c ("crypto: vmac - remove insecure
version with hardcoded nonce"). These were intentionally breaking
changes that changed all the computed MAC values as well as the
algorithm name ("vmac" to "vmac64"). No complaints were ever received
about these breaking changes, strongly suggesting the absence of users.
The reason I had put some effort into fixing this code in 2018 is
because it was used by an out-of-tree driver. But if it is still needed
in that particular out-of-tree driver, the code can be carried in that
driver instead. There is no need to carry it upstream.
Cc: Atharva Tiwari <evepolonium@gmail.com>
Cc: Shane Wang <shane.wang@intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As discussed at LSF/MM [1] [2] and with no objections raised there,
deprecate the SLAB allocator. Rename the user-visible option so that
users with CONFIG_SLAB=y get a new prompt with explanation during make
oldconfig, while make olddefconfig will just switch to SLUB.
In all defconfigs with CONFIG_SLAB=y remove the line so those also
switch to SLUB. Regressions due to the switch should be reported to
linux-mm and slab maintainers.
[1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/
[2] https://lwn.net/Articles/932201/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Helge Deller <deller@gmx.de> # parisc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
|
Clean up config files by:
- removing configs that were deleted in the past
- removing configs not in tree and without recently pending patches
- adding new configs that are replacements for old configs in the file
For some detailed information, see Link.
Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CONFIG_NFSD_V3 has been removed. NFSD support for NFSv3 can no
longer be disabled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This config was removed so remove all references to it.
Fixes: f7e33bdbd6d1 ("fs: remove mandatory file locking support")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures. These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time. Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.
Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Regenerate the R3k DECstation defconfig, in particular including more
relevant drivers.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20984/
Cc: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove old, dead Kconfig options (in order appearing in this commit):
- EXPERIMENTAL is gone since v3.9;
- INET_LRO: commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library");
- MTD_CONCAT: commit f53fdebcc3e1 ("mtd: drop MTD_CONCAT from Kconfig
entirely");
- MTD_CHAR: commit 660685d9d1b4 ("mtd: merge mtdchar module with
mtdcore");
- NETDEV_1000 and NETDEV_10000: commit f860b0522f65 ("drivers/net:
Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with
just ETHERNET but that is separate change;
- MISC_DEVICES: commit 7c5763b8453a ("drivers: misc: Remove
MISC_DEVICES config option");
- HID_SUPPORT: commit 1f41a6a99476 ("HID: Fix the generic Kconfig
options");
- BT_L2CAP and BT_SCO: commit f1e91e1640d8 ("Bluetooth: Always compile
SCO and L2CAP in Bluetooth Core");
- DEBUG_ERRORS: commit b025a3f836d1 ("ARM: 6876/1: Kconfig.debug:
Remove unused CONFIG_DEBUG_ERRORS");
- USB_DEVICE_CLASS: commit 007bab91324e ("USB: remove
CONFIG_USB_DEVICE_CLASS");
- RCU_CPU_STALL_DETECTOR: commit a00e0d714fbd ("rcu: Remove conditional
compilation for RCU CPU stall warnings");
- IP_NF_QUEUE: commit 3dd6664fac7e ("netfilter: remove unused "config
IP_NF_QUEUE"");
- IP_NF_TARGET_ULOG: commit d4da843e6fad ("netfilter: kill remnants of
ulog targets");
- IP6_NF_QUEUE: commit d16cf20e2f2f ("netfilter: remove ip_queue
support");
- IP6_NF_TARGET_LOG: commit 6939c33a757b ("netfilter: merge ipt_LOG and
ip6_LOG into xt_LOG");
- USB_LED: commit a335aaf3125c ("usb: misc: remove outdated USB LED
driver");
- MMC_UNSAFE_RESUME: commit 2501c9179dff ("mmc: core: Use
MMC_UNSAFE_RESUME as default behavior");
- AUTOFS_FS: commit 561c5cf9236a ("staging: Remove autofs3");
- VIDEO_OUTPUT_CONTROL: commit f167a64e9d67 ("video / output: Drop
display output class support");
- USB_LIBUSUAL: commit f61870ee6f8c ("usb: remove libusual");
- CRYPTO_ZLIB: 110492183c4b ("crypto: compress - remove unused pcomp
interface");
- BLK_DEV_UB: commit 68a5059ecf82 ("block: remove the deprecated ub
driver");
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: linux-arm-kernel@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/16342/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Option is long gone, see
5d9efa7ee99e ("ipv6: Remove privacy config option.")
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/12919/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Because of the removal of the scsi_tgt kernel module, the kbuild variables
CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS
are obsolete. This patch removes these variables. This patch is the result
of the following command:
find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.
This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).
Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Currently, MIPS kernels silently overwrite kernel command-line parameters
hardcoded in CONFIG_CMDLINE by the ones received from firmware. Therefore,
using firmware remains the only reliable method to transfer the
command-line parameters, which is not always desirable or convenient, and
the CONFIG_CMDLINE option is thereby effectively rendered useless.
This patch fixes the problem described above and introduces a more flexible
scheme of handling the kernel command line, in a manner identical to what is
currently used for x86. The default behavior, i.e. when CONFIG_CMDLINE_BOOL
is not defined, retains the existing semantics, and firmware command-line
arguments override the hardcoded ones.
[Ralf: I fixed up all the defconfig files so the stay unaffected by this
change.]
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/689/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The platform has never been fully merged
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The Qemu platform was originally implemented to have an easily supportable
platform until Qemu reaches a state where it emulates a real world system.
Since the latest release Qemu is capable of emulating the MIPSsim and
Malta platforms, so this goal has been reached. The Qemu plaform is also
rather underfeatured so less useful than a Malta emulation.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
According to Broadcom the PT systems are production test systems which
never reached customers so no need to keep the fragmentary support we
currently have.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
delete mode 100644 arch/mips/configs/ocelot_c_defconfig
delete mode 100644 arch/mips/momentum/ocelot_c/Makefile
delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c
delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c
delete mode 100644 arch/mips/momentum/ocelot_c/irq.c
delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
delete mode 100644 arch/mips/momentum/ocelot_c/platform.c
delete mode 100644 arch/mips/momentum/ocelot_c/prom.c
delete mode 100644 arch/mips/momentum/ocelot_c/reset.c
delete mode 100644 arch/mips/momentum/ocelot_c/setup.c
delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c
delete mode 100644 arch/mips/pci/fixup-ocelot-c.c
delete mode 100644 arch/mips/pci/pci-ocelot-c.c
|
|
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
A defconfig file and the 10 lines of code (including comments ...) that
are rotting since lmo commit 6516a42dc8b40c6c00010346dd51496125b16644
don't quite make proper support, so let's trash it.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch adds trivial support for SMARTMIPS extension. This extension
is currently implemented by 4KS[CD] CPUs.
Basically it saves/restores ACX register, which is part of the SMARTMIPS
ASE, when needed. This patch does *not* add any support for Smartmips MMU
features.
Futhermore this patch does not add explicit support for 4KS[CD] CPUs since
they are respectively mips32 and mips32r2 compliant. So with the current
processor configuration, a platform that has such CPUs needs to select
both configs:
CPU_HAS_SMARTMIPS
SYS_HAS_CPU_MIPS32_R[12]
This is due to the processor configuration which is mixing up all the
architecture variants and the processor types.
The drawback of this, is that we currently pass '-march=mips32' option to
gcc when building a kernel instead of '-march=4ksc' for 4KSC case. This
can lead to a kernel image a little bit bigger than required.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Sanitise a number of settings for the DECstation.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add those lines to all defconfigs.
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
This is a patch againt linux-mips.org git tree.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
|
Make HZ configurable. DECSTATION can select 128/256/1024 HZ, JAZZ can
only select 100 HZ, others can select 100/128/250/256/1000/1024 HZ if
not explicitly specified). Also remove all mach-xxx/param.h files and
update all defconfigs according to current HZ value.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
As warned several times before.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
As warned several times before.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
