summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dccg/dcn401
AgeCommit message (Collapse)Author
2026-03-30drm/amd/display: Fixed Silence complier warnings in dcGaghik Khachatrian
[Why] Resolve compiler warnings by marking unused parameters explicitly. [How] In .c and .h function definitions, keep parameter names in signatures and add a line with `(void)param;` in function body Preserved function signatures and avoids breaking code paths that may reference the parameter under conditional compilation. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-30drm/amd/display: Remove invalid DPSTREAMCLK mask usageRoman Li
[Why] The invalid register field access causes ASSERT(mask != 0) to fire in set_reg_field_values() during display enable. WARNING: at drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:100 set_reg_field_values.isra.0+0xcf/0xf0 [amdgpu] Call Trace: <TASK> generic_reg_update_ex+0x66/0x1d0 [amdgpu] dccg401_set_dpstreamclk+0xed/0x350 [amdgpu] dcn401_enable_stream+0x165/0x370 [amdgpu] link_set_dpms_on+0x6e9/0xe90 [amdgpu] dce110_apply_single_controller_ctx_to_hw+0x343/0x530 [amdgpu] dce110_apply_ctx_to_hw+0x1f6/0x2d0 [amdgpu] dc_commit_state_no_check+0x49a/0xe20 [amdgpu] dc_commit_streams+0x354/0x570 [amdgpu] amdgpu_dm_atomic_commit_tail+0x6f8/0x3fc0 [amdgpu] DCN4.x hardware does not have DPSTREAMCLK_GATE_DISABLE and DPSTREAMCLK_ROOT_GATE_DISABLE fields in DCCG_GATE_DISABLE_CNTL3. These global fields only exist in DCN3.1.x hardware. [How] Remove the call that tries to update non-existent fields in CNTL3. DCN4.x uses per-instance fields in CNTL5 instead, which are already correctly programmed in the switch cases above. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-11drm/amd/display: Sync dcn42 with DC 3.2.373Roman Li
This patch provides a bulk merge to align driver support for DCN42 with Display Core version 3.2.373. It includes upgrade for: - clk_mgr - dml2/dml21 - optc - hubp - mpc - optc - hwseq Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-19drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.Bhuvanachandra Pinninti
[Why] Direct DCCG register access in hwseq layer was creating register conflicts. [How] Migrated DCCG registers from hwseq-dccg component. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Expose functions of other dcn useDmytro Laktyushkin
[Why & HOw] Expose some functions for later dcns to reuse Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Add more DC HW state info to underflow loggingKaren Chen
[Why] Debugging underflow issues frequently requires knowing the HW state at the time of underflow. To enable capturing this HW state information, interface functions are needed for the various DC HW blocks. [How] This change adds the interface functions to read HW state for the following DC HW blocks: - HUBBUB - HUBP - DPP - MPC - OPP - DSC - OPTC - DCCG Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Karen Chen <Karen.Chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: incorrect conditions for failing dto calculationsClay King
[Why & How] Previously, when calculating dto phase, we would incorrectly fail when phase <=0 without additionally checking for the integer value. This meant that calculations would incorrectly fail when the desired pixel clock was an exact multiple of the reference clock. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add num_slices_h to set_dto_dscclk signatureIlya Bakoulin
Add the number of horizontal slices argument to allow configuring clock based on slice number. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Refactor DCN4x and related codePatel, Swapnil
[why & how] Refactor existing code related to DCN4x for better code sharing with other modules. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Allow reuse of of DCN4x codeDmytro
Remove the static qualifier to make it available for code sharing with other components. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Dmytro <dmytro.laktyushkin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Configure DTBCLK_P with OPTC only for dcn401Dillon Varone
[WHY] DTBCLK_P is used to generate virtual pixel clock, and to drive the HPO stream encoder clock. Programming the required clock when enabling/disabling both components can cause issues. For example, if HPO is being disabled and clock source is changed to REFCLK, virtual pixel rate will then be wrong, causing issues in CRTC. [HOW] Only program the DTBCLK_P when programming CRTC, as its expected it will be enabled prior to HPO, and disabled after HPO in all valid cases. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDSRyan Seto
[Why] If two monitors with TMDS signals were timing synced and one was disconnected, the stream would go out of sync too early due to the PLL turning off and the system could hang [How] On link disable output, change PHY FSM transition from TX_EN-to-PHY_OFF to TX_EN-to-PLL_ON for TMDS Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Refactor dccg401_get_other_enable_symclk_feRelja Vojvodic
[WHY] Function was used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up. [HOW] Refactored the function to correctly return the number of FEs connected to the input BE. Also renamed it for clarity. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Fix incorrect size calculation for loop in dcn401Alex Hung
[WHY] fe_clk_en and be_clk_sel have size of 4 but sizeof(fe_clk_en) has byte size 16 which is lager than the array size. [HOW] Use ARRAY_SIZE for calculating size. This fixes 2 OVERRUN issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Avoid programming DTO if Refclk is 0Chris Park
[Why] Reference clock, either DPREFCLK or DTBCLK can be a value of 0 which then will encounter division by 0. [How] Avoid further calculation and programming if refclk is not populated. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Keep VBios pixel rate div setting until next mode setyi-lchen
[why] Vbios & Driver have difference pixel rate div policy. When enabling fast boot & performing blank & unblank w/o timing setting, pixel clock & pixel rate dividor are not match. It would cause too high pixel reate and eDP would be black screen. [How] We would keep pixel rate div setting by Vbios until next timing setting. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: yi-lchen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/display: Add missing enable and disable symclk_se functions for dcn401Wenjing Liu
The functions are missing. These two functions are required to support MST. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Refactor DCN401 DCCG into component directoryRevalla Hari Krishna
[WHY] Clean up the code that requires dccg to be in its own component. [HOW] Move all files under newly created dccg dir and fix the makefiles. Acked-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-26 03:26:09 +0000