| Age | Commit message (Collapse) | Author |
|---|
|
Add support for MT7987.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/20251223175710.25850-3-linux@fw-web.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add LVTS driver support for MT8196.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-7-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
On MT8196/MT6991, per-sensor calibration data read from eFuses is
16-bit. When the LVTS controller operates in 16-bit mode, a fixed offset
must be added to MSR values during post-processing to obtain correct
temperature readings. Introduce a new msr_offset field in lvts_data,
program the respective register and apply the offset to the calibration
data read from eFuses.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-6-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
MT8196/MT6991 uses ATP (Abnormal Temperature Prevention) mode to detect
abnormal temperature conditions, which involves reading temperature data
from a dedicated set of registers separate from the ones used for
immediate and filtered modes.
Add support for ATP mode and its relative registers to ensure accurate
temperature readings and proper thermal management on MT8196/MT6991
devices.
While at it, convert mode defines to enum.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-5-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
MT8196/MT6991 require a different version of lvts_temp_to_raw(),
specifically the multiplicative inverse of the existing implementation.
Introduce a variant of the function with inverted calculation logic to
match this requirement.
This ensures accurate raw value generation for temperature
thresholds, avoiding spurious thermal interrupts or unintended hardware
resets on MT8196/MT6991.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-4-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
conversion logic
Introduce lvts_platform_ops struct to support SoC-specific versions of
lvts_raw_to_temp() and lvts_temp_to_raw() conversion functions.
This is in preparation for supporting SoCs like MT8196/MT6991, which
require a different lvts_temp_to_raw() implementation.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-3-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
MT8196/MT6991 use 2-byte eFuse calibration data, whereas other SoCs
supported by the driver rely on 3 bytes. Make the number of calibration
bytes per sensor configurable, enabling support for SoCs with varying
calibration formats.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-2-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
./drivers/thermal/mediatek/lvts_thermal.c:642:2-3: Unneeded semicolon.
A semicolon is present after the closing bracket of the loop, let's
remove it.
No functional change intended.
[ dlezcano : Reworded the description and reordered the tags order ]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=23244
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250801063540.2959610-1-jiapeng.chong@linux.alibaba.com
|
|
These commands are necessary to avoid severely abnormal and inaccurate
temperature readings that are caused by using the default commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-4-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
driver data
Add LVTS commands and their sizes to driver data in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-3-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
const
Change the LVTS commands array to static const in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-2-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
'struct thermal_zone_device_ops' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
28116 5168 128 33412 8284 drivers/thermal/armada_thermal.o
After:
=====
text data bss dec hex filename
28244 5040 128 33412 8284 drivers/thermal/armada_thermal.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # For Armada
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/5bba3bf0139e2418b306a0f9a2f1f81ef49e88a6.1748165978.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When debugfs is disabled, the function has no reference any more:
drivers/thermal/mediatek/lvts_thermal.c:266:13: error: 'lvts_debugfs_exit' defined but not used [-Werror=unused-function]
266 | static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
| ^~~~~~~~~~~~~~~~~
Fixes: ef280c17a840 ("thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250505052502.1812867-1-arnd@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When running the probe function for this driver, the function
lvts_debugfs_init() gets called in lvts_domain_init() which, in
turn, gets called in lvts_probe() before registering threaded
interrupt handlers.
Even though it's unlikely, the last call may fail and, if it does,
there's nothing removing the already created debugfs folder and
files.
In order to fix that, instead of calling the lvts debugfs cleanup
function upon failure, register a devm action that will take care
of calling that upon failure or driver removal.
Since devm was used, also delete the call to lvts_debugfs_exit()
in the lvts_remove() callback, as now that's done automatically.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250402083852.20624-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Only sensors that are valid need to have their interrupts enable status
updated based on their thresholds. Use the lvts_for_each_valid_sensor()
helper in lvts_update_irq_mask() to ignore invalid sensors.
Currently, since the invalid sensors will always contain zeroed out
thresholds (from kzalloc), they will always get their interrupts
disabled on this loop. So this commit doesn't change the resulting
interrupts configuration, but it slightly optimizes the loop by skipping
the invalid sensors, avoids potential future surprises if at some point
memory is no longer allocated for invalid sensors, as well as makes the
code more obvious.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-5-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Interrupts are enabled per sensor in lvts_update_irq_mask() as needed,
there's no point in enabling all of them during initialization. Change
the MONINT register initial value so all sensor interrupts start
disabled.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-4-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
In order to get working interrupts, a low offset value needs to be
configured. The minimum value for it is 20 Celsius, which is what is
configured when there's no lower thermal trip (ie the thermal core
passes -INT_MAX as low trip temperature). However, when the temperature
gets that low and fluctuates around that value it causes an interrupt
storm.
Prevent that interrupt storm by not enabling the low offset interrupt if
the low threshold is the minimum one.
Cc: stable@vger.kernel.org
Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Stage 3 thermal threshold is currently configured during
the controller initialization to 105 Celsius. From the kernel
perspective, this configuration is harmful because:
* The stage 3 interrupt that gets triggered when the threshold is
crossed is not handled in any way by the IRQ handler, it just gets
cleared. Besides, the temperature used for stage 3 comes from the
sensors, and the critical thermal trip points described in the
Devicetree will already cause a shutdown when crossed (at a lower
temperature, of 100 Celsius, for all SoCs currently using this
driver).
* The only effect of crossing the stage 3 threshold that has been
observed is that it causes the machine to no longer be able to enter
suspend. Even if that was a result of a momentary glitch in the
temperature reading of a sensor (as has been observed on the
MT8192-based Chromebooks).
For those reasons, disable the Stage 3 thermal threshold configuration.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-2-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When configured in filtered mode, the LVTS thermal controller will
monitor the temperature from the sensors and trigger an interrupt once a
thermal threshold is crossed.
Currently this is true even during suspend and resume. The problem with
that is that when enabling the internal clock of the LVTS controller in
lvts_ctrl_set_enable() during resume, the temperature reading can glitch
and appear much higher than the real one, resulting in a spurious
interrupt getting generated.
Disable the temperature monitoring and give some time for the signals to
stabilize during suspend in order to prevent such spurious interrupts.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: 8137bb90600d ("thermal/drivers/mediatek/lvts_thermal: Add suspend and resume")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-1-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/thermal to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way make a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241019163412.304422-2-u.kleine-koenig@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Don't populate the read-only arrays on the stack at run time, instead
make them static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20241022184622.1296044-1-colin.i.king@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
On some pre-production hardware, the SoCs do not contain calibration
data for the thermal sensors. The downstream drivers provide default
values that sort of work, instead of having the thermal sensors not
work at all.
Port the default values to the upstream driver. These values are from
the ChromeOS kernels, which sadly do not cover the MT7988.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620092306.2352606-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.
Fixes: 78c88534e5e1 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.
Fixes: a2ca202350f9 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
data
This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Filtered mode is not supported on mt8188 SoC and is the source of bad
results. Move to immediate mode which provides good temperatures.
Fixes: f4745f546e60 ("thermal/drivers/mediatek/lvts_thermal: Add MT8188 support")
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240516-mtk-thermal-mt8188-mode-fix-v2-1-40a317442c62@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
In 'lvts_should_update_thresh()' and 'lvts_ctrl_start()' functions,
the parameter passed to 'lvts_for_each_valid_sensor()' macro is always
'lvts_ctrl->lvts_data->lvts_ctrl'. In other words, the array index 0
is systematically passed as 'struct lvts_ctrl_data' type item, even
when another item should be consumed instead.
Hence, the 'valid_sensor_mask' value which is selected can be wrong
because unrelated to the 'struct lvts_ctrl_data' type item that should
be used. Hence, some thermal zone can be registered for a sensor 'i'
that does not actually exist. Because of the invalid address used
as 'lvts_sensor[i].msr', this situation ends up with a crash in
'lvts_get_temp()' function, where this 'msr' pointer is passed to
'readl_poll_timeout()' function. The following message is output:
"Unable to handle kernel NULL pointer dereference at virtual
address <msr>", with <msr> = 0.
This patch fixes the issue.
Fixes: 11e6f4c31447 ("thermal/drivers/mediatek/lvts_thermal: Allow early empty sensor slots")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240503-mtk-thermal-lvts-ctrl-idx-fix-v1-2-f605c50ca117@baylibre.com
|
|
lvts_ctrl_data
In struct lvts_ctrl_data, num_lvts_sensor and cal_offset[] are not used.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240503-mtk-thermal-lvts-ctrl-idx-fix-v1-1-f605c50ca117@baylibre.com
|
|
Verify that lvts_data is not NULL before using it.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240502-mtk-thermal-lvts-data-v1-1-65f1b0bfad37@baylibre.com
|
|
Various values extracted from the vendor's kernel driver.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-15-nico@fluxnic.net
|
|
Some systems don't always populate sensor controller slots starting
at slot 0. Use a bitmap instead of a count to indicate valid sensor
slots. Also create a pretty iterator for that.
About that iterator: it causes checkpatch to complain with "ERROR:
Macros with multiple statements should be enclosed in a do - while
loop". However this is not possible here. And many similar iterators
do exist using the same form in the tree already.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-12-nico@fluxnic.net
|
|
The golden temperature calibration value in nvram is not always the
3rd byte. A future commit will prove this assumption wrong.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-11-nico@fluxnic.net
|
|
Various values extracted from the vendor's kernel driver.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-9-nico@fluxnic.net
|
|
We don't want to silently fetch garbage past the actual buffer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-6-nico@fluxnic.net
|
|
Current code assumes calibration values are always stored contiguously
in host endian order. A future patch will prove this wrong.
Let's specify the offset for each calibration byte instead.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-5-nico@fluxnic.net
|
|
All the .hw_tshut_temp instances are initialized with the same value.
Let's remove those and use a common definition instead. If ever a
different value must be used in the future then an override parameter
could be added back.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-4-nico@fluxnic.net
|
|
Move efuse data interpretation inside lvts_golden_temp_init() alongside
the actual code retrieving wanted value.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-3-nico@fluxnic.net
|
|
Calibration values are 24-bit wide. Those values so far appear to span
only 16 bits but let's not push our luck.
Found while looking at the original Mediatek driver code.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-2-nico@fluxnic.net
|
|
In order for lvts_raw_to_temp to function properly on mt8192,
temperature coefficients for mt8192 need to be added.
Fixes: 288732242db4 ("thermal/drivers/mediatek/lvts_thermal: Add mt8192 support")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240416-lvts_thermal-v2-1-f8a36882cc53@chromium.org
|
|
Reading thermal sensor on mt7986 devices returns invalid temperature:
bpi-r3 ~ # cat /sys/class/thermal/thermal_zone0/temp
-274000
Fix this by adding missing members in mtk_thermal_data struct which were
used in mtk_thermal_turn_on_buffer after commit 33140e668b10.
Cc: stable@vger.kernel.org
Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230907112018.52811-1-linux@fw-web.de
|
|
handling path
If devm_krealloc() fails, then 'efuse' is leaking.
So free it to avoid a leak.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/481d345233862d58c3c305855a93d0dbc2bbae7e.1706431063.git.christophe.jaillet@wanadoo.fr
|
|
Update LVTS calibration data documentation for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[bero@baylibre.com: Fix issues pointed out by Nícolas F. R. A. Prado <nfraprado@collabora.com>]
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231017190545.157282-6-bero@baylibre.com
|
|
Add LVTS Driver support for MT8192.
Co-developed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[bero@baylibre.com: cosmetic changes, rebase]
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231017190545.157282-4-bero@baylibre.com
|
|
Add suspend and resume support to LVTS driver.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
[bero@baylibre.com: suspend/resume in noirq phase]
Co-developed-by: Bernhard Rosenkränzer <bero@baylibre.com>
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231017190545.157282-3-bero@baylibre.com
|
|
Fix the probe function to call mtk_thermal_release_periodic_ts for
everything != MTK_THERMAL_V1. This was accidentally changed from V1
to V2 in the original patch.
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Closes: https://lore.kernel.org/lkml/B0B3775B-B8D1-4284-814F-4F41EC22F532@public-files.de/
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Closes: https://lore.kernel.org/lkml/07a569b9-e691-64ea-dd65-3b49842af33d@linaro.org/
Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230918100706.1229239-1-msp@baylibre.com
|
|
debugfs_create_dir() function returns an error value embedded in
the pointer (PTR_ERR). Evaluate the return value using IS_ERR
rather than checking for NULL.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230921091057.3812-1-duminjie@vivo.com
|
|
Add Support for Mediatek Filogic 880/MT7988 LVTS.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230922055020.6436-5-linux@fw-web.de
|
|
The upcoming mt7988 has different temperature coefficients so we
cannot use constants in the functions lvts_golden_temp_init,
lvts_golden_temp_init and lvts_raw_to_temp anymore.
Add a field in the lvts_ctrl pointing to the lvts_data which now
contains the soc-specific temperature coefficents.
To make the code better readable, rename static int coeff_b to
golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230922055020.6436-4-linux@fw-web.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230811192847.3838-1-aboutphysycs@gmail.com
|
