Merge branch '2023-02-07-Kconfig-cleanup-dead-code-removal'

To quote the author:
This series adds source scanning to moveconfig.py so that it can look
for Kconfig options mentioned in the source which do not appear in
Kconfig, and vice versa.

This tool is then used to clean up the unused or obsolete options
mentioned in Makefiles, along with any attached source code.

1 files changed, 0 insertions, 59 deletions

diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h
deleted file mode 100644
index 6ae1d848801..00000000000
--- a/include/usb/fusbh200.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Faraday USB 2.0 EHCI Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#ifndef _FUSBH200_H
-#define _FUSBH200_H
-
-struct fusbh200_regs {
-	struct {
-		uint32_t data[4];
-	} hccr;			/* 0x00 - 0x0f: hccr */
-	struct {
-		uint32_t data[9];
-	} hcor;			/* 0x10 - 0x33: hcor */
-	uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
-	uint32_t rsvd[2];
-	uint32_t bmcsr;	/* 0x40: Bus Monitor Control Status Register */
-	uint32_t bmisr;	/* 0x44: Bus Monitor Interrupt Status Register */
-	uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
-};
-
-/* EOF & Async. Schedule Sleep Timer Register */
-#define EASSTR_RUNNING  (1 << 6) /* Put transceiver in running/resume mode */
-#define EASSTR_SUSPEND  (0 << 6) /* Put transceiver in suspend mode */
-#define EASSTR_EOF2(x)  (((x) & 0x3) << 4) /* EOF 2 Timing */
-#define EASSTR_EOF1(x)  (((x) & 0x3) << 2) /* EOF 1 Timing */
-#define EASSTR_ASST(x)  (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
-
-/* Bus Monitor Control Status Register */
-#define BMCSR_SPD_HIGH  (2 << 9) /* Speed of the attached device */
-#define BMCSR_SPD_LOW   (1 << 9)
-#define BMCSR_SPD_FULL  (0 << 9)
-#define BMCSR_SPD_MASK  (3 << 9)
-#define BMCSR_SPD_SHIFT 9
-#define BMCSR_SPD(x)    ((x >> 9) & 0x03)
-#define BMCSR_VBUS      (1 << 8) /* VBUS Valid */
-#define BMCSR_VBUS_OFF  (1 << 4) /* VBUS Off */
-#define BMCSR_VBUS_ON   (0 << 4) /* VBUS On */
-#define BMCSR_IRQLH     (1 << 3) /* IRQ triggered at level-high */
-#define BMCSR_IRQLL     (0 << 3) /* IRQ triggered at level-low */
-#define BMCSR_HALFSPD   (1 << 2) /* Half speed mode for FPGA test */
-#define BMCSR_HFT_LONG  (1 << 1) /* HDISCON noise filter = 270 us*/
-#define BMCSR_HFT       (0 << 1) /* HDISCON noise filter = 135 us*/
-#define BMCSR_VFT_LONG  (1 << 1) /* VBUS noise filter = 472 us*/
-#define BMCSR_VFT       (0 << 1) /* VBUS noise filter = 135 us*/
-
-/* Bus Monitor Interrupt Status Register */
-/* Bus Monitor Interrupt Enable Register */
-#define BMISR_DMAERR    (1 << 4) /* DMA error */
-#define BMISR_DMA       (1 << 3) /* DMA complete */
-#define BMISR_DEVRM     (1 << 2) /* device removed */
-#define BMISR_OVD       (1 << 1) /* over-current detected */
-#define BMISR_VBUSERR   (1 << 0) /* VBUS error */
-
-#endif