diff options
Diffstat (limited to 'arch/arm/mach-rockchip')
| -rw-r--r-- | arch/arm/mach-rockchip/px30/px30.c | 61 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rk3528/rk3528.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rk3576/MAINTAINERS | 11 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rk3576/rk3576.c | 54 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rk3588/Kconfig | 18 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rk3588/rk3588.c | 8 |
6 files changed, 158 insertions, 0 deletions
diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c index 8ce9ac561f0..5a5c119328f 100644 --- a/arch/arm/mach-rockchip/px30/px30.c +++ b/arch/arm/mach-rockchip/px30/px30.c @@ -2,10 +2,14 @@ /* * Copyright (c) 2017 Rockchip Electronics Co., Ltd */ + +#define LOG_CATEGORY LOGC_ARCH + #include <clk.h> #include <dm.h> #include <fdt_support.h> #include <init.h> +#include <misc.h> #include <spl.h> #include <asm/armv8/mmu.h> #include <asm/arch-rockchip/bootrom.h> @@ -15,6 +19,7 @@ #include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/cru_px30.h> #include <dt-bindings/clock/px30-cru.h> +#include <linux/bitfield.h> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ff390000", @@ -442,3 +447,59 @@ void board_debug_uart_init(void) #endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */ } #endif /* CONFIG_DEBUG_UART_BOARD_INIT */ + +#define PX30_OTP_SPECIFICATION_OFFSET 0x06 + +#define DDR_GRF_BASE_ADDR 0xff630000 +#define DDR_GRF_CON(n) (0 + (n) * 4) + +int checkboard(void) +{ + struct udevice *dev; + u8 specification; + u32 base_soc; + int ret; + + if (!IS_ENABLED(CONFIG_ROCKCHIP_OTP) || !CONFIG_IS_ENABLED(MISC)) + return 0; + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_DRIVER_GET(rockchip_otp), &dev); + if (ret) { + log_debug("Could not find otp device, ret=%d\n", ret); + return 0; + } + + /* base SoC: 0x26334b52 for RK3326; 0x30335850 for PX30 */ + ret = misc_read(dev, 0, &base_soc, 4); + if (ret < 0) { + log_debug("Could not read specification, ret=%d\n", ret); + return 0; + } + + if (base_soc != 0x26334b52 && base_soc != 0x30335850) { + log_debug("Could not identify SoC, got 0x%04x in OTP\n", base_soc); + return 0; + } + + /* SoC variant: 0x21 for PX30/PX30S/RK3326/RK3326S; 0x2b for PX30K */ + ret = misc_read(dev, PX30_OTP_SPECIFICATION_OFFSET, &specification, 1); + if (ret < 0) { + log_debug("Could not read specification, ret=%d\n", ret); + return 0; + } + + if (specification == 0x2b) { + printf("SoC: PX30K\n"); + return 0; + } + + /* From vendor kernel: drivers/soc/rockchip/rockchip-cpuinfo.c */ + specification = FIELD_GET(GENMASK(15, 14), + readl(DDR_GRF_BASE_ADDR + DDR_GRF_CON(1))); + log_debug("DDR specification is %d\n", specification); + printf("SoC: %s%s\n", base_soc == 0x26334b52 ? "RK3326" : "PX30", + specification == 0x3 ? "S" : ""); + + return 0; +} diff --git a/arch/arm/mach-rockchip/rk3528/rk3528.c b/arch/arm/mach-rockchip/rk3528/rk3528.c index 4892ff6ba9d..f9bfc445b85 100644 --- a/arch/arm/mach-rockchip/rk3528/rk3528.c +++ b/arch/arm/mach-rockchip/rk3528/rk3528.c @@ -9,6 +9,9 @@ #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/hardware.h> +#define VPU_GRF_BASE 0xff340000 +#define USB3OTG_CON1 0x44 + #define FIREWALL_DDR_BASE 0xff2e0000 #define FW_DDR_MST6_REG 0x58 #define FW_DDR_MST7_REG 0x5c @@ -69,6 +72,9 @@ int arch_cpu_init(void) val = readl(FIREWALL_DDR_BASE + FW_DDR_MST16_REG); writel(val & 0xffff0000, FIREWALL_DDR_BASE + FW_DDR_MST16_REG); + /* Disable USB3OTG U3 port, later enabled in COMBPHY driver */ + writel(0xffff0181, VPU_GRF_BASE + USB3OTG_CON1); + return 0; } diff --git a/arch/arm/mach-rockchip/rk3576/MAINTAINERS b/arch/arm/mach-rockchip/rk3576/MAINTAINERS new file mode 100644 index 00000000000..94ef74d429f --- /dev/null +++ b/arch/arm/mach-rockchip/rk3576/MAINTAINERS @@ -0,0 +1,11 @@ +GENERIC-RK3576 +M: Jonas Karlman <jonas@kwiboo.se> +S: Maintained +F: arch/arm/dts/rk3576-generic* +F: configs/generic-rk3576_defconfig + +SIGE5-RK3576 +M: Jonas Karlman <jonas@kwiboo.se> +S: Maintained +F: arch/arm/dts/rk3576-armsom-sige5* +F: configs/sige5-rk3576_defconfig diff --git a/arch/arm/mach-rockchip/rk3576/rk3576.c b/arch/arm/mach-rockchip/rk3576/rk3576.c index ba5c94b4b3d..a6c2fbdc484 100644 --- a/arch/arm/mach-rockchip/rk3576/rk3576.c +++ b/arch/arm/mach-rockchip/rk3576/rk3576.c @@ -3,6 +3,10 @@ * Copyright (c) 2024 Rockchip Electronics Co., Ltd */ +#define LOG_CATEGORY LOGC_ARCH + +#include <dm.h> +#include <misc.h> #include <asm/armv8/mmu.h> #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/hardware.h> @@ -29,6 +33,9 @@ #define SGRF_DOMAIN_CON4 0x10 #define SGRF_DOMAIN_CON5 0x14 +#define USB_GRF_BASE 0x2601E000 +#define USB3OTG0_CON1 0x0030 + const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/soc/mmc@2a330000", [BROM_BOOTSOURCE_SD] = "/soc/mmc@2a310000", @@ -151,5 +158,52 @@ int arch_cpu_init(void) */ writel(0xffffff00, SYS_SGRF_BASE + SYS_SGRF_SOC_CON20); + /* Disable USB3OTG0 U3 port, later enabled by USBDP PHY driver */ + writel(0xffff0188, USB_GRF_BASE + USB3OTG0_CON1); + + return 0; +} + +#define RK3576_OTP_CPU_CODE_OFFSET 0x02 +#define RK3576_OTP_SPECIFICATION_OFFSET 0x08 + +int checkboard(void) +{ + u8 cpu_code[2], specification; + struct udevice *dev; + char suffix[2]; + int ret; + + if (!IS_ENABLED(CONFIG_ROCKCHIP_OTP) || !CONFIG_IS_ENABLED(MISC)) + return 0; + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_DRIVER_GET(rockchip_otp), &dev); + if (ret) { + log_debug("Could not find otp device, ret=%d\n", ret); + return 0; + } + + /* cpu-code: SoC model, e.g. 0x35 0x76 */ + ret = misc_read(dev, RK3576_OTP_CPU_CODE_OFFSET, cpu_code, 2); + if (ret < 0) { + log_debug("Could not read cpu-code, ret=%d\n", ret); + return 0; + } + + /* specification: SoC variant, e.g. 0xA for RK3576J */ + ret = misc_read(dev, RK3576_OTP_SPECIFICATION_OFFSET, &specification, 1); + if (ret < 0) { + log_debug("Could not read specification, ret=%d\n", ret); + return 0; + } + specification &= 0x1f; + + /* for RK3576J i.e. '@' + 0xA = 'J' */ + suffix[0] = specification > 1 ? '@' + specification : '\0'; + suffix[1] = '\0'; + + printf("SoC: RK%02x%02x%s\n", cpu_code[0], cpu_code[1], suffix); + return 0; } diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index 4e7942ada87..9fbe3f225aa 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -27,6 +27,23 @@ config TARGET_CM3588_NAS_RK3588 - 3.5mm Headphone out, 2.0mm PH-2A Mic in - 5V Fan connector, PWM beeper, IR receiver, RTC battery connector +config TARGET_GAMEFORCE_ACE_RK3588S + bool "GameForce Ace" + help + The GameForce Ace is a handheld game console from GameForce with + the Rockchip RK3588S SoC. + + Hardware features: + - Rockchip RK3588S SoC + - 12GB LPDDR4x RAM + - 128GB eMMC + - MicroSD card slot + - 1x USB 3.0 Type-C with DP AltMode support + - 1x HDMI 2.1 micro-HDMI out + - 1920x1080 touchscreen MIPI-DSI panel + - Analog joysticks and L/R triggers + - 16 digital buttons + config TARGET_GENBOOK_CM5_RK3588 bool "Cool Pi CM5 GenBook" help @@ -410,6 +427,7 @@ source "board/friendlyelec/cm3588-nas-rk3588/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" source "board/friendlyelec/nanopi-r6c-rk3588s/Kconfig" source "board/friendlyelec/nanopi-r6s-rk3588s/Kconfig" +source "board/gameforce/ace-rk3588s/Kconfig" source "board/hardkernel/odroid_m2/Kconfig" source "board/indiedroid/nova/Kconfig" source "board/khadas/khadas-edge2-rk3588s/Kconfig" diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c b/arch/arm/mach-rockchip/rk3588/rk3588.c index e2278ff792b..c01a4002089 100644 --- a/arch/arm/mach-rockchip/rk3588/rk3588.c +++ b/arch/arm/mach-rockchip/rk3588/rk3588.c @@ -15,6 +15,10 @@ #include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/ioc_rk3588.h> +#define USB_GRF_BASE 0xfd5ac000 +#define USB3OTG0_CON1 0x001c +#define USB3OTG1_CON1 0x0034 + #define FIREWALL_DDR_BASE 0xfe030000 #define FW_DDR_MST5_REG 0x54 #define FW_DDR_MST13_REG 0x74 @@ -184,6 +188,10 @@ int arch_cpu_init(void) /* Disable JTAG exposed on SDMMC */ rk_clrreg(&sys_grf->soc_con[6], SYS_GRF_FORCE_JTAG); #endif + + /* Disable USB3OTG U3 ports, later enabled by USBDP PHY driver */ + writel(0xffff0188, USB_GRF_BASE + USB3OTG0_CON1); + writel(0xffff0188, USB_GRF_BASE + USB3OTG1_CON1); #endif return 0; |