diff options
Diffstat (limited to 'arch/arm/mach-socfpga')
| -rw-r--r-- | arch/arm/mach-socfpga/include/mach/handoff_soc64.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-socfpga/include/mach/system_manager_soc64.h | 12 | ||||
| -rw-r--r-- | arch/arm/mach-socfpga/misc_arria10.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-socfpga/smc_api.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-socfpga/system_manager_soc64.c | 24 |
6 files changed, 39 insertions, 5 deletions
diff --git a/arch/arm/mach-socfpga/include/mach/handoff_soc64.h b/arch/arm/mach-socfpga/include/mach/handoff_soc64.h index 9ef82cf46c0..b8f2f73e283 100644 --- a/arch/arm/mach-socfpga/include/mach/handoff_soc64.h +++ b/arch/arm/mach-socfpga/include/mach/handoff_soc64.h @@ -98,6 +98,8 @@ #define SOC64_HANDOFF_IOCTL_LEN 96 #if IS_ENABLED(CONFIG_TARGET_SOCFPGA_STRATIX10) #define SOC64_HANDOFF_FPGA_LEN 42 +#elif IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX5) +#define SOC64_HANDOFF_FPGA_LEN 44 #else #define SOC64_HANDOFF_FPGA_LEN 40 #endif diff --git a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h index 2099c51b682..1a461de4819 100644 --- a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h +++ b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h @@ -398,10 +398,8 @@ int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len); int mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len); int mbox_init(void); -#ifdef CONFIG_CADENCE_QSPI int mbox_qspi_close(void); int mbox_qspi_open(void); -#endif int mbox_reset_cold(void); int mbox_hps_stage_notify(u32 execution_stage); diff --git a/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h b/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h index 054a28d845d..f768a3a55cb 100644 --- a/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h +++ b/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h @@ -33,6 +33,7 @@ void populate_sysmgr_pinmux(void); #define SYSMGR_SOC64_ECC_INTMASK_CLR 0x98 #define SYSMGR_SOC64_ECC_INTMASK_SERR 0x9C #define SYSMGR_SOC64_ECC_INTMASK_DERR 0xA0 +#define SYSMGR_SOC64_USB3_MISC_CTRL_REG0 0x1F0 #define SYSMGR_SOC64_MPFE_CONFIG 0x228 #define SYSMGR_SOC64_BOOT_SCRATCH_POR0 0x258 #define SYSMGR_SOC64_BOOT_SCRATCH_POR1 0x25C @@ -47,6 +48,17 @@ void populate_sysmgr_pinmux(void); #define ALT_SYSMGR_SCRATCH_REG_POR_0_DDR_PROGRESS_MASK BIT(0) #define ALT_SYSMGR_SCRATCH_REG_POR_1_REVA_WORKAROUND_USER_MODE_MASK BIT(0) #define ALT_SYSMGR_SCRATCH_REG_POR_1_REVA_WORKAROUND_MASK BIT(1) + +/* + * Bits for SYSMGR_SOC64_USB3_MISC_CTRL_REG0 + * Bits[14:13] Port Overcurrent + * Bit[12] Reset Pulse Override + */ +#define SYSMGR_SOC64_USB3_MISC_CTRL_REG0_PORT_OVR_CURR GENMASK(14, 13) +#define SYSMGR_SOC64_USB3_MISC_CTRL_REG0_RESET_PUL_OVR BIT(12) +#define SET_USB3_MISC_CTRL_REG0_PORT_RESET_PUL_OVR 1 +/* BIT 1 actually reflects PIPE power present signal */ +#define SET_USB3_MISC_CTRL_REG0_PORT_OVR_CURR_BIT_1 2 #else #define SYSMGR_SOC64_NAND_AXUSER 0x5c #define SYSMGR_SOC64_DMA_L3MASTER 0x74 diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c index c442af02888..7e0f3875b7c 100644 --- a/arch/arm/mach-socfpga/misc_arria10.c +++ b/arch/arm/mach-socfpga/misc_arria10.c @@ -214,10 +214,7 @@ int qspi_flash_software_reset(void) /* Get the flash info */ ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS, - CONFIG_SF_DEFAULT_SPEED, - CONFIG_SF_DEFAULT_MODE, &flash); - if (ret) { debug("Failed to initialize SPI flash at "); debug("%u:%u (error %d)\n", CONFIG_SF_DEFAULT_BUS, diff --git a/arch/arm/mach-socfpga/smc_api.c b/arch/arm/mach-socfpga/smc_api.c index b212a94b321..a531030f5be 100644 --- a/arch/arm/mach-socfpga/smc_api.c +++ b/arch/arm/mach-socfpga/smc_api.c @@ -57,6 +57,7 @@ int smc_send_mailbox(u32 cmd, u32 len, u32 *arg, u8 urgent, u32 *resp_buf_len, resp, ARRAY_SIZE(resp)); if (ret == INTEL_SIP_SMC_STATUS_OK && resp_buf && resp_buf_len) { + invalidate_dcache_range((uintptr_t)resp_buf, (uintptr_t)(resp_buf + *resp_buf_len)); if (!resp[0]) *resp_buf_len = resp[1]; } diff --git a/arch/arm/mach-socfpga/system_manager_soc64.c b/arch/arm/mach-socfpga/system_manager_soc64.c index 4b42158be9d..913f93c8f94 100644 --- a/arch/arm/mach-socfpga/system_manager_soc64.c +++ b/arch/arm/mach-socfpga/system_manager_soc64.c @@ -8,9 +8,29 @@ #include <asm/arch/system_manager.h> #include <asm/global_data.h> #include <asm/io.h> +#include <linux/bitfield.h> DECLARE_GLOBAL_DATA_PTR; +#if IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX5) +/* + * Setting RESET_PULSE_OVERRIDE bit for successful reset staggering pulse + * generation and setting PORT_OVERCURRENT bit so that until we turn on the + * Vbus, it doesn't give false information about Vbus to the HPS controller. + */ +static void sysmgr_config_usb3(void) +{ + u32 reg_val = 0; + + reg_val = readl(socfpga_get_sysmgr_addr() + SYSMGR_SOC64_USB3_MISC_CTRL_REG0); + reg_val |= FIELD_PREP(SYSMGR_SOC64_USB3_MISC_CTRL_REG0_RESET_PUL_OVR, + SET_USB3_MISC_CTRL_REG0_PORT_RESET_PUL_OVR); + reg_val |= FIELD_PREP(SYSMGR_SOC64_USB3_MISC_CTRL_REG0_PORT_OVR_CURR, + SET_USB3_MISC_CTRL_REG0_PORT_OVR_CURR_BIT_1); + writel(reg_val, socfpga_get_sysmgr_addr() + SYSMGR_SOC64_USB3_MISC_CTRL_REG0); +} +#endif + /* * Configure all the pin muxes */ @@ -18,6 +38,10 @@ void sysmgr_pinmux_init(void) { populate_sysmgr_pinmux(); populate_sysmgr_fpgaintf_module(); + +#if IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX5) + sysmgr_config_usb3(); +#endif } /* |