3 files changed, 11 insertions, 71 deletions
diff --git a/board/phytec/phycore_imx8mm/phycore_imx8mm.env b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
index 402d967ab7d..b3f09154328 100644
--- a/board/phytec/phycore_imx8mm/phycore_imx8mm.env
+++ b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
@@ -1,65 +1,15 @@
-#include <env/phytec/rauc.env>
-
-bootcmd=
-	mmc dev ${mmcdev};
-	if mmc rescan; then
-		if test ${doraucboot} = 1; then
-			run raucinit;
-		fi;
-		if run loadimage; then
-			run mmcboot;
-		else
-			run netboot;
-		fi;
-	fi;
-console=ttymxc2,115200
+console=ttymxc2,CONFIG_BAUDRATE
 emmc_dev=2
-fdt_addr_r=0x48000000
 fdtfile=CONFIG_DEFAULT_FDT_FILE
-image=Image
+fdt_addr_r=0x40480000
+fdt_overlay_addr_r=0x404a0000
+kernel_addr_r=0x40a00000
+kernel_comp_addr_r=0x43a00000
+kernel_comp_size=0x1e00000
+pxefile_addr_r=0x45800000
+ramdisk_addr_r=0x45802000
+scriptaddr=0x47600000
+script_offset_f=0x0
+script_size_f=0x2000
 ip_dyn=yes
-loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
-loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
-mmcargs=
-	setenv bootargs console=${console}
-	root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
-mmcautodetect=yes
-mmcboot=
-	echo Booting from mmc ...;
-	run mmcargs;
-	if run loadfdt; then
-		if test ${dofitboot} = 1; then
-			booti ${loadaddr} - ${fdt_addr_r}
-		else
-			echo WARN: Cannot load the DT;
-		fi;
-	fi;
-mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
-mmcpart=1
-mmcroot=2
-netargs=
-	setenv bootargs console=${console} root=/dev/nfs ip=dhcp
-	nfsroot=${serverip}:${nfsroot},v3,tcp
-netboot=
-	echo Booting from net ...;
-	if test ${ip_dyn} = yes; then
-		setenv get_cmd dhcp;
-	else
-		setenv get_cmd tftp;
-	fi;
-	${get_cmd} ${loadaddr} ${image};
-	run netargs;
-	if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
-		booti ${loadaddr} - ${fdt_addr_r};
-	else
-		echo WARN: Cannot load the DT;
-	fi;
 nfsroot=/srv/nfs
-update_bootimg=
-	mmc dev ${mmcdev};
-	if dhcp ${loadaddr} ${update_filepath}/${update_filename}; then
-		setexpr fw_sz ${filesize} / 0x200;
-		mmc write ${loadaddr} ${update_offset} ${fw_sz};
-	fi;
-update_filename=flash.bin
-update_offset=0x42
diff --git a/board/phytec/phycore_imx93/phycore-imx93.c b/board/phytec/phycore_imx93/phycore-imx93.c
index a55795e0603..8d2caf8bbef 100644
--- a/board/phytec/phycore_imx93/phycore-imx93.c
+++ b/board/phytec/phycore_imx93/phycore-imx93.c
@@ -6,10 +6,7 @@
  * Copyright (C) 2024 PHYTEC Messtechnik GmbH
  */
 
-#include <asm/arch-imx9/ccm_regs.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch-imx9/imx93_pins.h>
-#include <asm/arch/clock.h>
 #include <asm/global_data.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <env.h>
diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c
index a4d2aaac320..7b5d38d438f 100644
--- a/board/phytec/phycore_imx93/spl.c
+++ b/board/phytec/phycore_imx93/spl.c
@@ -14,9 +14,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/ele_api.h>
 #include <asm/sections.h>
-#include <hang.h>
 #include <init.h>
-#include <log.h>
 #include <power/pmic.h>
 #include <power/pca9450.h>
 #include <spl.h>
@@ -25,11 +23,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/*
- * Will be part of drivers/power/regulator/pca9450.c
- * when pca9451a support is added.
- */
-#define PCA9450_REG_PWRCTRL_TOFF_DEB    BIT(5)
 #define EEPROM_ADDR            0x50
 
 /*