diff options
Diffstat (limited to 'doc/board/nxp')
| -rw-r--r-- | doc/board/nxp/imx93_frdm.rst | 75 | ||||
| -rw-r--r-- | doc/board/nxp/index.rst | 1 |
2 files changed, 76 insertions, 0 deletions
diff --git a/doc/board/nxp/imx93_frdm.rst b/doc/board/nxp/imx93_frdm.rst new file mode 100644 index 00000000000..a1f526fd4cc --- /dev/null +++ b/doc/board/nxp/imx93_frdm.rst @@ -0,0 +1,75 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +imx93_frdm +========== + +U-Boot for the NXP i.MX93 FRDM board + +Quick Start +----------- + +- Get and Build the ARM Trusted firmware +- Get the DDR firmware +- Get ahab-container.img +- Build U-Boot +- Boot from the SD card + +Get and Build the ARM Trusted firmware +-------------------------------------- + +Note: srctree is U-Boot source directory +Get ATF from: https://github.com/nxp-imx/imx-atf/ +branch: lf_v2.8 + +.. code-block:: bash + + $ unset LDFLAGS + $ make PLAT=imx93 bl31 + $ cp build/imx93/release/bl31.bin $(srctree) + +Get the DDR firmware +-------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin + $ chmod +x firmware-imx-8.21.bin + $ ./firmware-imx-8.21.bin + $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree) + +Get ahab-container.img +---------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin + $ chmod +x firmware-sentinel-0.11.bin + $ ./firmware-sentinel-0.11.bin + $ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree) + +Build U-Boot +------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-poky-linux- + $ make imx93_frdm_defconfig + $ make + +Copy the flash.bin binary to the MicroSD card at offset 32KB: + +.. code-block:: bash + + $ dd if=flash.bin of=/dev/sd[x] bs=1k seek=32; sync + +Boot from the SD card +--------------------- + +- Configure SW1 boot switches to SD boot mode: + 0011 SW1[3:0] - ("USDHC2 4-bit SD3.0" Boot Mode) +- Insert the SD card in the SD slot (P13) of the board. +- Connect a USB Type-C cable into the P16 Debug USB Port and connect + using a terminal emulator at 115200 bps, 8n1. The console will show up + at /dev/ttyACM0. +- Power on the board by connecting a USB Type-C cable into the P1 + Power USB Port. diff --git a/doc/board/nxp/index.rst b/doc/board/nxp/index.rst index e7ec725cc04..aa7d857346d 100644 --- a/doc/board/nxp/index.rst +++ b/doc/board/nxp/index.rst @@ -15,6 +15,7 @@ NXP Semiconductors imx91_11x11_evk imx93_9x9_qsb imx93_11x11_evk + imx93_frdm imx95_evk imxrt1020-evk imxrt1050-evk |