diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/am57xx_evm.h | 19 | ||||
| -rw-r--r-- | include/configs/amd_versal2.h | 2 | ||||
| -rw-r--r-- | include/configs/dra7xx_evm.h | 24 | ||||
| -rw-r--r-- | include/configs/imx93_evk.h | 4 | ||||
| -rw-r--r-- | include/configs/imx93_frdm.h | 4 | ||||
| -rw-r--r-- | include/configs/imx93_qsb.h | 4 | ||||
| -rw-r--r-- | include/configs/rk3288_common.h | 3 | ||||
| -rw-r--r-- | include/configs/socfpga_agilex7m_socdk.h | 12 | ||||
| -rw-r--r-- | include/configs/socfpga_soc64_common.h | 22 | ||||
| -rw-r--r-- | include/configs/ti_omap5_common.h | 228 | ||||
| -rw-r--r-- | include/configs/voyager.h | 40 |
11 files changed, 79 insertions, 283 deletions
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 266b77fbf68..8c29c940478 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -11,30 +11,13 @@ #ifndef __CONFIG_AM57XX_EVM_H #define __CONFIG_AM57XX_EVM_H -#include <env/ti/dfu.h> #include <linux/sizes.h> #define CFG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ -#ifndef CONFIG_XPL_BUILD -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_QSPI -#else -#ifdef CONFIG_SPL_DFU -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_RAM -#endif -#endif - -#include <configs/ti_omap5_common.h> - /* CPSW Ethernet */ +#include <configs/ti_omap5_common.h> #endif /* __CONFIG_AM57XX_EVM_H */ diff --git a/include/configs/amd_versal2.h b/include/configs/amd_versal2.h index 1ade6adfa0b..f1c432aa391 100644 --- a/include/configs/amd_versal2.h +++ b/include/configs/amd_versal2.h @@ -145,12 +145,14 @@ #else /* CONFIG_DISTRO_DEFAULTS */ # define BOOTENV +# define BOOTENV_DEV_SHARED_XSPI #endif /* CONFIG_DISTRO_DEFAULTS */ /* Initial environment variables */ #ifndef CFG_EXTRA_ENV_SETTINGS #define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ + "usb_pgood_delay=2000\0" \ BOOTENV \ BOOTENV_DEV_SHARED_XSPI \ DFU_ALT_INFO diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 3c960ca2ce2..9df7ef055bf 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -11,40 +11,16 @@ #ifndef __CONFIG_DRA7XX_EVM_H #define __CONFIG_DRA7XX_EVM_H -#include <env/ti/dfu.h> - #define CFG_MAX_MEM_MAPPED 0x80000000 #ifndef CONFIG_QSPI_BOOT /* MMC ENV related defines */ #endif -#if (CONFIG_CONS_INDEX == 1) -#define CONSOLEDEV "ttyS0" -#elif (CONFIG_CONS_INDEX == 3) -#define CONSOLEDEV "ttyS2" -#endif #define CFG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ -#ifndef CONFIG_XPL_BUILD -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_QSPI -#endif - -#ifdef CONFIG_XPL_BUILD -#ifdef CONFIG_SPL_DFU -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_RAM -#endif -#endif - #include <configs/ti_omap5_common.h> /* NAND support */ diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index e7db0161126..ffd72a38bcb 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -11,10 +11,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_XPL_BUILD -#define CFG_MALLOC_F_ADDR 0x204D0000 -#endif - #ifdef CONFIG_ENV_MMC_DEVICE_INDEX #define IMX93_EVK_MMC_ENV_DEV CONFIG_ENV_MMC_DEVICE_INDEX #else diff --git a/include/configs/imx93_frdm.h b/include/configs/imx93_frdm.h index 987fcacb999..c98c10774cb 100644 --- a/include/configs/imx93_frdm.h +++ b/include/configs/imx93_frdm.h @@ -11,10 +11,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_XPL_BUILD -#define CFG_MALLOC_F_ADDR 0x204D0000 -#endif - /* Link Definitions */ #define CFG_SYS_INIT_RAM_ADDR 0x80000000 diff --git a/include/configs/imx93_qsb.h b/include/configs/imx93_qsb.h index 5ddc191d17c..a7b94f7ab57 100644 --- a/include/configs/imx93_qsb.h +++ b/include/configs/imx93_qsb.h @@ -9,10 +9,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD -#define CFG_MALLOC_F_ADDR 0x204D0000 -#endif - #define CFG_SYS_INIT_RAM_ADDR 0x80000000 #define CFG_SYS_INIT_RAM_SIZE 0x200000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 0c449e31099..52c3695ff8e 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -18,7 +18,8 @@ #define ENV_MEM_LAYOUT_SETTINGS \ "scriptaddr=0x00000000\0" \ "pxefile_addr_r=0x00100000\0" \ - "fdt_addr_r=0x01f00000\0" \ + "fdt_addr_r=0x01e00000\0" \ + "fdtoverlay_addr_r=0x01f00000\0" \ "kernel_addr_r=0x02000000\0" \ "ramdisk_addr_r=0x04000000\0" diff --git a/include/configs/socfpga_agilex7m_socdk.h b/include/configs/socfpga_agilex7m_socdk.h new file mode 100644 index 00000000000..deff70ee67a --- /dev/null +++ b/include/configs/socfpga_agilex7m_socdk.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2025 Altera Corporation <www.altera.com> + * + */ + +#ifndef __CONFIG_SOCFGPA_AGILEX7M_H__ +#define __CONFIG_SOCFGPA_AGILEX7M_H__ + +#include <configs/socfpga_soc64_common.h> + +#endif /* __CONFIG_SOCFGPA_AGILEX7M_H__ */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 83b600c7fcc..3d09a06f63e 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -19,6 +19,20 @@ #define CPU_RELEASE_ADDR 0xFFD12210 /* + * Share sysmgr.boot_scratch_cold6 & 7 (64bit) with VBAR_LE3_BASE_ADDR + * Indicate L2 reset is done. HPS should trigger warm reset via RMR_EL3. + */ +#define L2_RESET_DONE_REG 0xFFD12218 + +/* sysmgr.boot_scratch_cold8 bit 17 (1bit) will be used to check whether CPU0 + * is being powered off/on from kernel + */ +#define BOOT_SCRATCH_COLD8 0xFFD12220 + +/* Magic word to indicate L2 reset is completed */ +#define L2_RESET_DONE_STATUS 0x1228E5E7 + +/* * U-Boot console configurations */ @@ -39,6 +53,9 @@ * U-Boot environment configurations */ +#define CFG_SYS_NAND_U_BOOT_SIZE (1 * 1024 * 1024) +#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE + /* * Environment variable */ @@ -159,6 +176,7 @@ " ${qspi_clock}; echo QSPI clock frequency updated; fi; fi\0" \ "scriptaddr=0x05FF0000\0" \ "scriptfile=boot.scr\0" \ + "nandroot=ubi0:rootfs\0" \ "socfpga_legacy_reset_compat=1\0" \ "smc_fid_rd=0xC2000007\0" \ "smc_fid_wr=0xC2000008\0" \ @@ -214,6 +232,10 @@ "scriptfile=u-boot.scr\0" \ "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \ "then source ${scriptaddr}:script; fi\0" \ + "nandfitboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${nandroot} rw rootwait rootfstype=ubifs ubi.mtd=1; " \ + "bootm ${loadaddr}\0" \ + "nandfitload=ubi part root; ubi readvol ${loadaddr} kernel\0" \ "socfpga_legacy_reset_compat=1\0" \ "smc_fid_rd=0xC2000007\0" \ "smc_fid_wr=0xC2000008\0" \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 39102f15eb9..9e02b0d0040 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -39,216 +39,6 @@ #define DFUARGS #endif -#include <env/ti/mmc.h> -#include <env/ti/nand.h> - -#ifndef CONSOLEDEV -#define CONSOLEDEV "ttyS2" -#endif - -#ifndef PARTS_DEFAULT -/* - * Default GPT tables for eMMC (Linux and Android). Notes: - * 1. Keep partitions aligned to erase group size (512 KiB) when possible - * 2. Keep partitions in sync with DFU_ALT_INFO_EMMC (see dfu.h) - * 3. Keep 'bootloader' partition (U-Boot proper) start address in sync with - * CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (see common/spl/Kconfig) - */ -#define PARTS_DEFAULT \ - /* Linux partitions */ \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \ - "name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \ - /* Android partitions */ \ - "partitions_android=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \ - "name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};" \ - "name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};" \ - "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ - "name=boot_a,size=20M,uuid=${uuid_gpt_boot_a};" \ - "name=boot_b,size=20M,uuid=${uuid_gpt_boot_b};" \ - "name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};" \ - "name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};" \ - "name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};" \ - "name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};" \ - "name=recovery,size=64M,uuid=${uuid_gpt_recovery};" \ - "name=super,size=2560M,uuid=${uuid_gpt_super};" \ - "name=metadata,size=16M,uuid=${uuid_gpt_metadata};" \ - "name=userdata,size=-,uuid=${uuid_gpt_userdata}" -#endif /* PARTS_DEFAULT */ - -#if defined(CONFIG_CMD_AVB) -#define AVB_VERIFY_CHECK "if run avb_verify; then " \ - "echo AVB verification OK.;" \ - "set bootargs $bootargs $avb_bootargs;" \ - "else " \ - "echo AVB verification failed.;" \ - "exit; fi;" -#define AVB_VERIFY_CMD "avb_verify=avb init 1; avb verify $slot_suffix;\0" -#else -#define AVB_VERIFY_CHECK "" -#define AVB_VERIFY_CMD "" -#endif - -#define CONTROL_PARTITION "misc" - -#if defined(CONFIG_CMD_BCB) && defined(CONFIG_ANDROID_AB) -#define AB_SELECT_SLOT \ - "if part number mmc 1 " CONTROL_PARTITION " control_part_number; " \ - "then " \ - "echo " CONTROL_PARTITION \ - " partition number:${control_part_number};" \ - "bcb ab_select slot_name mmc ${mmcdev}:${control_part_number};" \ - "else " \ - "echo " CONTROL_PARTITION " partition not found;" \ - "exit;" \ - "fi;" \ - "setenv slot_suffix _${slot_name};" -#define AB_SELECT_ARGS \ - "setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \ - "echo A/B cmdline addition: ${bootargs_ab};" \ - "setenv bootargs ${bootargs} ${bootargs_ab};" -#else -#define AB_SELECT_SLOT "" -#define AB_SELECT_ARGS "" -#endif - -/* - * Prepares complete device tree blob for current board (for Android boot). - * - * Boot image or recovery image should be loaded into $loadaddr prior to running - * these commands. The logic of these commnads is next: - * - * 1. Read correct DTB for current SoC/board from boot image in $loadaddr - * to $fdtaddr - * 2. Merge all needed DTBO for current board from 'dtbo' partition into read - * DTB - * 3. User should provide $fdtaddr as 3rd argument to 'bootm' - */ -#define PREPARE_FDT \ - "echo Preparing FDT...; " \ - "if test $board_name = am57xx_evm_reva3; then " \ - "echo \" Reading DTBO partition...\"; " \ - "part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \ - "part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \ - "mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \ - "echo \" Reading DTB for AM57x EVM RevA3...\"; " \ - "abootimg get dtb --index=0 dtb_start dtb_size; " \ - "cp.b $dtb_start $fdtaddr $dtb_size; " \ - "fdt addr $fdtaddr 0x80000; " \ - "echo \" Applying DTBOs for AM57x EVM RevA3...\"; " \ - "adtimg addr $dtboaddr; " \ - "adtimg get dt --index=0 dtbo0_addr dtbo0_size; " \ - "fdt apply $dtbo0_addr; " \ - "adtimg get dt --index=1 dtbo1_addr dtbo1_size; " \ - "fdt apply $dtbo1_addr; " \ - "elif test $board_name = beagle_x15_revc; then " \ - "echo \" Reading DTB for Beagle X15 RevC...\"; " \ - "abootimg get dtb --index=0 dtb_start dtb_size; " \ - "cp.b $dtb_start $fdtaddr $dtb_size; " \ - "fdt addr $fdtaddr 0x80000; " \ - "else " \ - "echo Error: Android boot is not supported for $board_name; " \ - "exit; " \ - "fi; " \ - -#define DEFAULT_COMMON_BOOT_TI_ARGS \ - "console=" CONSOLEDEV ",115200n8\0" \ - "fdtfile=undefined\0" \ - "finduuid=part uuid mmc 0:2 uuid\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - AVB_VERIFY_CMD \ - "partitions=" PARTS_DEFAULT "\0" \ - "optargs=\0" \ - "dofastboot=0\0" \ - "emmc_android_boot=" \ - "setenv mmcdev 1; " \ - "mmc dev $mmcdev; " \ - "mmc rescan; " \ - AB_SELECT_SLOT \ - "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \ - CONTROL_PARTITION "; then " \ - "setenv ardaddr -; " \ - "if bcb test command = bootonce-bootloader; then " \ - "echo Android: Bootloader boot...; " \ - "bcb clear command; bcb store; " \ - "fastboot 1; " \ - "exit; " \ - "elif bcb test command = boot-recovery; then " \ - "echo Android: Recovery boot...; " \ - "setenv ardaddr $loadaddr;" \ - "setenv apart recovery; " \ - "else " \ - "echo Android: Normal boot...; " \ - "setenv ardaddr $loadaddr; " \ - "setenv apart boot${slot_suffix}; " \ - "fi; " \ - "else " \ - "echo Warning: BCB is corrupted or does not exist; " \ - "echo Android: Normal boot...; " \ - "fi; " \ - "setenv eval_bootargs setenv bootargs $bootargs; " \ - "run eval_bootargs; " \ - "setenv machid fe6; " \ - AVB_VERIFY_CHECK \ - AB_SELECT_ARGS \ - "if part start mmc $mmcdev $apart boot_start; then " \ - "part size mmc $mmcdev $apart boot_size; " \ - "mmc read $loadaddr $boot_start $boot_size; " \ - PREPARE_FDT \ - "bootm $loadaddr $ardaddr $fdtaddr; " \ - "else " \ - "echo $apart partition not found; " \ - "exit; " \ - "fi;\0" - -#define DEFAULT_FDT_TI_ARGS \ - "findfdt="\ - "if test $board_name = omap5_uevm; then " \ - "setenv fdtfile omap5-uevm.dtb; fi; " \ - "if test $board_name = dra7xx; then " \ - "setenv fdtfile dra7-evm.dtb; fi;" \ - "if test $board_name = dra72x-revc; then " \ - "setenv fdtfile dra72-evm-revc.dtb; fi;" \ - "if test $board_name = dra72x; then " \ - "setenv fdtfile dra72-evm.dtb; fi;" \ - "if test $board_name = dra71x; then " \ - "setenv fdtfile dra71-evm.dtb; fi;" \ - "if test $board_name = dra76x_acd; then " \ - "setenv fdtfile dra76-evm.dtb; fi;" \ - "if test $board_name = beagle_x15; then " \ - "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ - "if test $board_name = beagle_x15_revb1; then " \ - "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \ - "if test $board_name = beagle_x15_revc; then " \ - "setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \ - "if test $board_name = am5729_beagleboneai; then " \ - "setenv fdtfile am5729-beagleboneai.dtb; fi;" \ - "if test $board_name = am572x_idk; then " \ - "setenv fdtfile am572x-idk.dtb; fi;" \ - "if test $board_name = am574x_idk; then " \ - "setenv fdtfile am574x-idk.dtb; fi;" \ - "if test $board_name = am57xx_evm; then " \ - "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ - "if test $board_name = am57xx_evm_reva3; then " \ - "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ - "if test $board_name = am571x_idk; then " \ - "setenv fdtfile am571x-idk.dtb; fi;" \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" - -#define GET_OVERLAY_MMC_TI_ARGS \ - "get_overlay_mmc=" \ - "fdt address ${fdtaddr};" \ - "fdt resize 0x100000;" \ - "for overlay in $name_overlays;" \ - "do;" \ - "load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/${overlay} &&" \ - "fdt apply ${dtboaddr};" \ - "done;\0" \ - #define BOOT_TARGET_DEVICES(func) \ func(TI_MMC, ti_mmc, na) \ func(MMC, mmc, 0) \ @@ -265,24 +55,6 @@ #include <config_distro_bootcmd.h> #define CFG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "get_name_kern=" \ - "if test $boot_fit -eq 1; then " \ - "setenv bootfile fitImage; " \ - "else " \ - "setenv bootfile zImage; " \ - "fi\0" \ - DEFAULT_FIT_TI_ARGS \ - "get_fit_config=setenv name_fit_config ${fdtfile}\0" \ - DEFAULT_COMMON_BOOT_TI_ARGS \ - DEFAULT_FDT_TI_ARGS \ - GET_OVERLAY_MMC_TI_ARGS \ - DFUARGS \ - NETARGS \ - NANDARGS \ BOOTENV /* diff --git a/include/configs/voyager.h b/include/configs/voyager.h new file mode 100644 index 00000000000..f6630b07ec9 --- /dev/null +++ b/include/configs/voyager.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2025 Andes Technology Corporation + * Randolph Lin, Andes Technology Corporation <randolph@andestech.com> + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define RISCV_MMODE_TIMERBASE 0xe6000000 +#define RISCV_MMODE_TIMER_FREQ 60000000 + +#define RISCV_SMODE_TIMER_FREQ 60000000 + +/* support JEDEC */ +#define PHYS_FLASH_1 0x8000000 /* BANK 0 */ +#define CFG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CFG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } +#define CFG_SYS_FLASH_BANKS_SIZES { 0x4000000 } + +/* Enable distro boot */ +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#define CFG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_addr_r=0x400600000\0" \ + "kernel_comp_addr_r=0x404600000\0" \ + "kernel_comp_size=0x04000000\0" \ + "pxefile_addr_r=0x408600000\0" \ + "scriptaddr=0x408700000\0" \ + "fdt_addr_r=0x408800000\0" \ + "ramdisk_addr_r=0x408900000\0" \ + BOOTENV + +#endif /* __CONFIG_H */ |