| Age | Commit message (Collapse) | Author |
|---|
|
Commit 775f7657ba58 ("Kconfig: clean up the efi configuration status")
by mistake revoked commit dcd1b63b7072 ("efi_loader: allow
EFI_LOADER_BOUNCE_BUFFER on all architectures").
Fixes: 775f7657ba58 ("Kconfig: clean up the efi configuration status")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Loic Devulder <ldevulder@suse.com>
|
|
The lwIP version of wget supports a different syntax with a URL,
in addition to the legacy syntax. Document that.
While we're at it, fix a couple of minor issues in the legacy
syntax:
- hostIPaddr can be a DNS name if CONFIG_CMD_DNS is enabled
- path is mandatory
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
doc/develop/spl.rst describes SPL, TPL, VPL.
Remove the outdated README.TPL document.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
* format according to Sphinx style
* add link to Linux Kconfig documentation
* sort table alphabetically in 'Conversion from boards.cfg to Kconfig'
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
The value of variable nt is never used. Just use NULL when calling
efi_check_pe().
The API function is not expected to write to the console. Such output might
have unwanted side effects on the screen layout of an EFI application.
Leave error handling to the caller.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
- Assorted additional lwIP fixes
- Assorted test fixes
- Assorted other localized fixes
|
|
Users might not know what 'CDP' refers to. Provide basic information.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Provide a unit test for the hextoull() function.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The dhcp command is supposed to have the following syntax as per
"help dhcp":
dhcp [loadAddress] [[hostIPaddr:]bootfilename]
In other words, any arguments should be passed to an implicit
tftpboot command after the DHCP exchange has occurred.
Add the missing code to the lwIP version of do_dhcp().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
|
|
We currently provide entropy to mbedTLS using 8b chunks.
Take into account the 'len' parameter passed by MBed TLS to the entropy
gathering function instead. Note that the current code works because len
is always 128 (defined at compile time), therefore mbedtls_hardware_poll()
is called repeatedly and the buffer is filled correctly. But passing 'len'
to dm_rng_read() is both better and simpler.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The lwIP version of wget also supports the legacy syntax. Document it in
the help string.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The local variables ipstr, maskstr and gwstr in static function
get_udev_ipv4_info() cannot be pointers to read-only data, since
they may be written to in case the device index is > 0. Therefore
make them char arrays allocated on the stack.
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reported-by: Adriano Cordova <adrianox@gmail.com>
Link: https://lists.denx.de/pipermail/u-boot/2024-November/572066.html
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
OSPI boot is broken due to missing bootph property
in pin mux of OSPI.
So add bootph to fix OSPI boot.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
|
|
The previous maintainer is no longer involved in total compute.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
|
|
While at the base level, this conversion looks equivalent, we now see
both of these tests failing (due to exceeding their allowed margin for
being too slow) in Azure with a very high frequency.
This reverts commit 88db4fc5fec20429881896740df61d402b4b1f66.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The local variables ipstr, maskstr and gwstr in static function
dhcp_loop() cannot be pointers to read-only data, since they may be
written to in case the device index is > 0. Therefore make them char
arrays allocated on the stack.
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
We make fewer calls to dm_test_restore() since
commit fbdac8155c89 ("test: Expand implementation of ut_list_has_dm_tests()")
Because of this some valid test combinations are now broken:
$ ./test/py/test.py --bd sandbox --build -k test_ut
$ ./test/py/test.py --bd sandbox --build -k "bootflow_android or bootflow_cros"
Shows:
Expected ' 2 cros ready mmc 4 mmc5.bootdev.part_4 ',
got ' 2 cros ready mmc 2 mmc5.bootdev.part_2 '
Here prep_mmc_bootdev() is called twice and it will bind bootmeth_cros twice.
Since bootmeth_cros is bound twice, 'bootflow scan' will find 2x the
expected bootflows.
Before
commit fbdac8155c89 ("test: Expand implementation of ut_list_has_dm_tests()")
this did not happen because a cleanup was called each time.
Add UTF_DM and UTF_SCAN_FDT flags to both tests to make sure that the
bootmeths are unbound after the test finishes.
Fixes: fbdac8155c89 ("test: Expand implementation of ut_list_has_dm_tests()")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/23474
- UFS support is enabled for SC7280 and SM8150 platforms.
- Qualcomm dt-bindings headers are all dropped in favour of
dts/upstream.
- The SMMU driver now correctly handles stream ID 0 and is disabled in
EL2.
- Initial support for capsule updates (using the new dynamic UUIDs) is
added for the RB3 Gen 2 board alongside a new SCSI backend for DFU.
- CONFIG_PINCONF is enabled in qcom_defconfig.
- The vqmmc supply is now enabled for sdcard support on boards that need
it.
- A quirk is added for reading GPIOs on the PM8550 PMIC
|
|
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
We only need to configure the SMMU when running in EL1. In EL2 the
hypervisor isn't running so peripherals can just do DMA as they wish.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
It turns out this is a very real stream ID. Who woulda thought?
Drop the 0 check on the SID, there's no reason for it to be there in the first
place.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Enable all the necessary options for capsule updates to work, as well as
a few additional EFI features.
Capsule updates themselves are only enabled for the RB3 Gen 2, since the
exact details on where to flash U-Boot (or how to handle multiple boot
methods) has not been finalised for other boards.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Qualcomm boards flash U-Boot a variety of partitions, implement support
for determining which slot U-Boot is running from, finding the correct
partition for that slot and configuring the appropriate DFU string.
Initially, we only support the RB3 Gen 2 where U-Boot is flashed to the
UEFI partition, and ignore handling of slots. In the future we will
additionally support booting U-Boot from other partitions (e.g. boot)
and correct handling for A/B.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
GPT partition tables include two bytes worth of vendor defined
attributes, per partition. ChromeOS and Qualcomm both use these (with
different encoding!) to handle A/B slot switching with a retry counter.
Expose these via the disk_partition struct so that they can be parsed by
the relevant board code.
This will be used on Qualcomm boards to determine which slot we're
booting on so that we can flash capsule updates to the correct one.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This is extremely similar to the MMC backend, but there are some notable
differences.
Works with a DFU string like
scsi 4=u-boot-bin part 11
Where "4" is the SCSI dev number (sequential LUN across all SCSI devices)
and "11" is the partition number.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Copy PHY tables over from Linux to support SM8150
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add configuration for the SC7280, copied from Linux 6.11
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Now the Qualcomm controller and PHY drivers were accepted,
enable then in the qcom_defconfig file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The upstream version has new defines use to build DT, drop
it in favor of the dts/upstream more recent one.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The ufsphy_v2_regs_layout is not used, drop it and fix:
phy-qcom-qmp-ufs.c:87:27: warning: ‘ufsphy_v2_regs_layout’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The qcom_pmic code is broken for new PMICs and should be fixed,
without the QUIRK the code is broken and the GPIOs don't work
anymore on SM8550 and SM8650 platforms.
Partially revert the revert and only add the quirk on the PM8550
PMIC, making the buttons and MMC detect gpio work again.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
On earlier platforms, the vqmmc regulator was enabled by the
previous bootloader, but on the newest (SM8650) it's not
and we need vqmmc to be enabled in order to have the card
to respond.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Set LOG_CATEGORY and pr_fmt. Also fix the time.h include.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Fastboot is very hungry when it flashes larges chunks, and 8MiB
is way too small, allocate a much bigger size like other platforms
using Fastboot.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # rb1
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The SM8550 and SM8650 SoCs requires PINCONF to properly
setup SDC pins in order to function correctly.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx changes for v2025.01-rc3:
- microblaze:
- Disable JFFS2
- fpga:
- pass compatible flag to fpga_load()
- zynqmp:
- SOM RTC fix
- SC(system controller) PMW polarity fix
- Fix ram_top calculation with introducing XILINX_MINI
- Fix RPU release command
- versal:
- Enable capsule update
- Enable soft reset and Micron octal flashes
- xilinx:
- Align Kconfig regarding SPI_STACKED_PARALLEL
- bootcount:
- Add new zynqmp driver
|
|
There is no common symbol which mini configurations are using and recent
get_mem_top() changes adding 1.3kB without having a way to remove it.
That's why introduce new symbol which can be used for removing features
which are not requested by these configurations.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/aa27b72e17057fa8cbdd92a2bbb863a31c8c1226.1731681053.git.michal.simek@amd.com
|
|
JFFS2 is not maintained for quite a long time and none should be using it.
Please use other filesystems for flashes like UBIFS instead.
Also remove jffs to MTD map but MTD map is for example that's why it won't
affect anything.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a8239acee8886229fdbff66142c46d522e3fe851.1731659933.git.michal.simek@amd.com
|
|
For RTC to start to operate there is a need to call the driver. The simple
way to do it is to set default RTC instance which will call the probe and
do basic initialization.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/01155f1555dbd42adc618906629f5fb45754d5a4.1731419926.git.michal.simek@amd.com
|
|
Activate the xSPI Software Reset support, which will be
utilized to transition from octal DTR mode to legacy
mode during shutdown and boot (if enabled).
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20241114042641.22642-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
The Micron MT35 series octal flashes can be activated
through the configuration option CONFIG_SPI_FLASH_MT35XU.
To ensure their detection, enable this option in the
default defconfig for octal flashes.
Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20241114051047.13700-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Moving the hw_reset function from the controller driver to
the NOR framework has caused the OSPI reset not to be triggered
in the Cadence driver's probe function. As a result, reading the
flash ID during SPI calibration is incorrect, and the
CQSPI_REG_RD_DATA_CAPTURE is set with an invalid value.This makes
it unable to read the flash ID properly.
To solve this problem, it's suggested to skip SPI calibration and
instead retrieve the read_delay directly from the device tree.
Skipping SPI calibration doesn't bring harm since there's no need
for the flash golden values stored during SPI calibration.
Instead, they are now read during the spi_nor_read_id call in the
NOR framework.
Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20241114062045.17581-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
ut_check_console_line() does include an assert.
Pass the result to ut_assertok().
Addresses-Coverity-ID: 514958 Error handling issues
Fixes: 7dfafcd65ef3 ("test: unit test for hash command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Some Kconfig symbols introduced in commit 8cb330355bd5 ("net: introduce
alternative implementation as net/lwip/") need a full description. The
NET symbol needs one, too.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The maximum length of a domain name is 253 as defined in RFC 1035.
So SERVER_NAME_SIZE should be 254 including NUL.
Fixes: 3c656c928bd7 ("net: lwip: add wget command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Nam Cao <namcao@linutronix.de> says:
We observed the following sporadic boot failure while booting from MMC
device:
=> boot
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
** Booting bootflow 'mmc@2194000.bootdev.part_1' with extlinux
Ignoring unknown command: �D���D��
Boot failed (err=-14)
The reason is because while allocating buffer to read a file from MMC,
alignment of 1 byte is used. Thus, the buffer doesn't work for performing
DMA, and garbage data is read.
While looking at this issue, I also noticed that if no alignment specified
(align=0) then fs_read_alloc() is documented to use the default. But the
default is no alignment. Therefore, other users of fs_read_alloc() which
specify align=0 may be broken as well.
The first patch changes extlinux_read_bootflow() to use proper buffer
alignment for DMA.
The second patch changes the default alignment of fs_read_alloc() to be
DMA-suitable, to fix other potential bugs.
|
|
The comment above fs_read_alloc() explains:
@align: Alignment to use for memory allocation (0 for default)
However, in the actual implementation, there is no alignment when @align is
zero.
This current default is probably fine for most cases. But for some block
devices which transfer data via DMA, ARCH_DMA_MINALIGN is needed.
Change the default alignment to ARCH_DMA_MINALIGN.
Fixes: de7b5a8a1ac0 ("fs: Create functions to load and allocate a file")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Javier Fernandez Pastrana <javier.pastrana@linutronix.de>
|
|
extlinux_read_bootflow() allocates a buffer to read from file system
without any alignment.
But for some block devices which transfer data via DMA, ARCH_DMA_MINALIGN
alignment is required. For example, due to misaligned buffer, the below
boot failure is observed.
=> boot
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
CACHE: Misaligned operation at range [9efa25f8, 9efa27f8]
** Booting bootflow 'mmc@2194000.bootdev.part_1' with extlinux
Ignoring unknown command: �D���D��
Boot failed (err=-14)
Change the buffer alignment to ARCH_DMA_MINALIGN.
Fixes: 31aefaf89a5b ("bootstd: Add an implementation of distro boot")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Javier Fernandez Pastrana <javier.pastrana@linutronix.de>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm
CI: https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/23393
- Two changes from Heinrich:
- One is adding some missing TPM files for proper maintenance.
- The second addresses Coverity-ID: 356664 replacing a mempcy() which
has undefined behavior with memmove()
|
|
All TPM code should be maintained.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
