| Age | Commit message (Collapse) | Author |
|---|
|
Add board specific functions for sam9x75 curiosity
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
|
|
Since the SoC and board DT are already available in dts/upstream,
add the difference from upstream DTS to at91-sam9x75_curiosity-u-boot.dtsi
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
|
|
Add new Microchip sam9x7 SoC based on an ARM926.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Add PMC driver support for sam9x7 SoC family
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
[balamanikandan.gunasundar@microchip.com: Add peripheral clock id for pmecc]
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
|
|
The clk_register function logs an error if parent_name is missing from the
Device Tree.On the SAM9X7, the main_rc node is omitted to stay aligned with
the Linux Device Tree.Remove the parent_name check in at91_clk_main_rc()
to allow it to pass NULL when the parent is not specified.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Add support for hardware dividers for PLL IDs.In sam9x7 SoC,
PLL_ID_PLLA and PLL_ID_PLLA_DIV2 has /2 hardware dividers
each.
fcorepllack -----> HW Div = 2 -+--> fpllack
|
+--> HW Div = 2 ---> fplladiv2ck
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
|
|
Add support for different core clock frequency input ranges
for different PLL IDs in the PLL driver and align sam9x60, sama7g5 SOC
platforms.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
|
|
Remove clock/at91.h file as it is subset of
dts/upstream/include/dt-bindings/clock/at91.h.
The constants defined in this header are being used only in dts
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Instead of using defines for the RAM size and base address, retrieve these
information from the devicetree.
This aligns with the sama5d27_som1_ek board in commit 73c1589f025d9
("board: sama5d27_som1_ek: Get dram size and base from device tree").
While at it, remove a spurious '/* SPL */' comment.
Signed-off-by: Fabio Estevam <festevam@denx.de>
|
|
Enable watchdog node on SAM9X60-Curiosity board.
A default timeout of 16s is added which is the maximum supported value,
also matching Linux driver's behavior.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Add the watchdog timer node for the sam9x60 SoC's.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
SAM9X60 has a slightly different watchdog implementation:
- Timer value moved into a new register WLR
- Some MR register fields have their position changed
This patch add SAM9X60 support, also adds a compatible
for SAMA5D4 which is the same as existing SAM9260.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
"wdt" is a better name for watchdog rather than generic "priv".
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Use the name "mr" since we are referring to timer mode register.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
at91_wdt struct is only used by spl, remove this reference and the struct
itself.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Rasmus Villemoes <ravi@prevas.dk> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
Link: https://lore.kernel.org/r/20250507121246.518691-1-ravi@prevas.dk
|
|
None of the list helpers use prefetch() anymore, and no C code relies
on getting this definition from list.h. In any case, such an arch/cpu
specific thing does not belong in a header that just consists of cpp
helper macros.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
AFAICT, CONFIG_CPU_HAS_PREFETCH has never existed as a proper Kconfig
symbol in U-Boot, nor has any board include file ever defined it.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
These all end up using the no-op prefetch() defined in linux/list.h,
because the only possible real implementation is in
arch/mips/include/asm/processor.h, which is behing
CONFIG_CPU_HAS_PREFETCH which is nowhere defined.
In order to be able to drop that fallback definition from list.h,
first remove all uses.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
The use of prefetch() in these list helpers was dropped back in 2011
in linux (e66eed651fd1 ("list: remove prefetching from regular list
iterators")). No arch in U-Boot defines any actual prefetch(), and as
the referenced commit says, it's usually not a win anyway.
Whole-sale sync of list.h is not really feasible, but we can
synchronize the macros containing a prefetch() with their linux
implementations as of v6.15-rc5, also importing the various helpers
needed, e.g. list_is_head() and list_next_entry().
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/26728
- Add support for imx28 BTT boards.
|
|
The btt[c3] devices are based on imx287 SoC.
U-Boot SPL 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200)
Trying to boot from MMC1
U-Boot 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200)
CPU: Freescale i.MX28 rev1.2 at 454 MHz
BOOT: SSP SPI #3, master, 3V3 NOR
Model: BTT3
Board: LWE BTT SoM HW rev 0
DRAM: 256 MiB
Core: 86 devices, 15 uclasses, devicetree: separate
MMC: MXS MMC: 0
Loading Environment from SPIFlash... SF: Detected is25lp128 with page
size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In: serial@80074000
Out: serial@80074000
Err: serial@80074000
Net: eth0: ethernet@800f0000
Hit any key to stop autoboot: 0
Signed-off-by: Lukasz Majewski <lukma@denx.de>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Atmel: Improve gadget disconnect stability by power cycling
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Fix ti_musb driver in gadget mode (with DM_USB_GADGET)
DFU:
- mmc/scsi backends when using 10 or more partitions
|
|
Contrary to the datasheet, setting both DETACH and PULLD_DIS bits to 1
does not always drive the DP and DM lines to high-impedance. This
prevents the host from reliably detecting a USB disconnect and subsequent
reconnect.
The symptom is that the first gadget command (e.g., dhcp) succeeds, while
subsequent commands (e.g., nfs) fail.
Disabling and re-enabling the controller entirely, instead of toggling the
PULLD_DIS bit, reliably generates a disconnect event.
The Linux driver works correctly because gadget_disconnect/gadget_connect
are always followed by gadget_udc_start/gadget_udc_stop. In U-Boot
pullup() is used solely.
This behavior has been observed on the SAM9X60-Curiosity and
AT91SAM9G25-EK boards and has been reported to Microchip.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Link: https://lore.kernel.org/r/20250602-pullup-v1-1-edcde5a050dd@hifiphile.com
[mkorpershoek: reworded commit title + comment to usba_udc_pullup()]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
Remove duplicate .ops assignment that was overriding the correct
ti_musb_gadget_ops with musb_usb_ops (host ops) in the ti_musb_peripheral
driver. This was causing U-Boot crashes when trying to call the
handle_interrupts operation since the wrong ops structure was being used.
Fixes: 7d98dbcc3dc ("usb: musb-new: Add support for DM_USB")
Fixes: 281eaf1ed83a ("usb: gadget: musb: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250611171031.840277-1-kory.maincent@bootlin.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
The third_arg for a dfu alt is read as an integer and is overloaded for
different supported backends. For ext4 and fat, this third_arg
represents the partition and forms the dev part string, which should
have its partition in hex. This commit fixes dfu ext4/fat usage for
devices with ten or more partitions.
Signed-off-by: Ivan Pang <ipman@amazon.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20250611050127.38011-1-ipman@amazon.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi
Updates for RPi for 2025.07-rc5:
- configs: rpi: set NR_DRAM_BANKS to 8 to accommodate RAM on 16GB models
|
|
Writing to eMMC on RK3528 is affected with the same or a similar issue
as on RK3588, where eMMC must init to HS200 at least once to fully work.
Trying to write u-boot-rockchip.bin to eMMC fails with:
=> mmc write $fileaddr 40 5000
MMC write: dev # 0, block # 64, count 20480 ... mmc write failed
0 blocks written: ERROR
For U-Boot to enable HS200 mode the mmc-hs200-1_8v prop must be defined
in the device tree. Linux does not seem to be affected and is able to
detect and use HS200 without this prop.
Enable use of HS200 and fix eMMC write on RK3528 by adding the missing
mmc-hs200-1_8v prop for affected boards:
=> mmc write $fileaddr 40 5000
MMC write: dev # 0, block # 64, count 20480 ... 20480 blocks written: OK
Fixes: b112a44531cb ("board: rockchip: Add minimal generic RK3528 board")
Fixes: ccbddf645310 ("board: rockchip: Add Radxa E20C")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
Raspberry Pi 5 can now have up to 16 GiB of RAM where the memory spans 8
DRAM banks in total. Increase the config value to 8 to initialize the
whole RAM. Without this change, kernel only sees 8 GiB of RAM on the 16
GiB CM5 as reported in [1].
[1] https://github.com/home-assistant/operating-system/issues/3989
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
|
|
6.15 + winbond"
Christian Marangi <ansuelsmth@gmail.com> says:
This small series sync linux/bitfield.h from Linux 6.15 and fix all
the compilation error due to a change in the header include.
The sync is needed to make it easier to support the winbond changes.
The changes are CI test with [1]
[1] https://github.com/u-boot/u-boot/pull/777
Link: https://lore.kernel.org/r/20250607211133.2005-1-ansuelsmth@gmail.com
|
|
Add Winbond W25N04KV flash support that use a different value to detect
ECC bitflip.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
Sync bitfield.h header with Linux 6.15 version. Mainly is to permit the
introduction of FIELD_PREP_CONST. The bug.h header changed to
build_bug.h doesn't cause any regression as we also ship split header
similar to how it's done with in Linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
The GENMASK/GENMASK_ULL macro requires inclusion of linux/bitops.h
header. It does currently work as bitfield.h includes it indirectly
but this will change when bitfield.h will be synced with new Linux
version.
Also raw printf require linux/bug.h header (also currently included
indirectly by bitfield.h)
Explicitly include the headers to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
E Shattow <e@freeshell.de> says:
Make consistent use of lowercase hexadecimal prefix '0x' throughout U-Boot.
There are a few remaining uses of uppercase 'X' to denote hexadecimal prefix
or placeholder in documentation and error messages.
External devicetree-rebasing dts/upstream and the generated code of
xilinx/zynq are ignored for the series.
Link: https://lore.kernel.org/r/20250606224558.1117422-1-e@freeshell.de
|
|
Use consistent lowercase hex prefix style in include/*
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Use consistent lowercase hex prefix style in arch/*
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Use consistent lowercase hex prefix style in lib/*
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Use consistent lowercase hex prefix style in tools/*
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Use consistent lowercase hex prefix style in drivers/*
Does not change hex prefix case in allcaps uppercase style error messages
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Use consistent lowercase hex prefix style in board/*
Does not change auto-generated files in xilinx/zynq/*/ps7_init_gpl.c
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Use consistent lowercase hex prefix style in configs/*
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Rasmus Villemoes <ravi@prevas.dk> says:
There's really no reason for the gd pointer to have the volatile
qualifier.
In fact, I claim that it's completely unnecessary and just pessimizes
code generation and forces ugly casts in lots of places. For example,
see the casts in drivers/core/tag.c where elements are added to
gd->dm_taglist, or a helper such as cyclic_get_list() that should not
be needed.
Also, it is what ends up standing in the way of an otherwise
innocent code cleanup of list.h:
https://lore.kernel.org/u-boot/20250522165656.GB2179216@bill-the-cat/
Note that riscv, x86 as well as arm64 with LTO enabled has not had
this volatile qualifier, so it's unlikely there's any generic code
that depends on it.
Link: https://lore.kernel.org/r/20250604195612.2312979-1-ravi@prevas.dk
|
|
It's slightly ironic that riscv at very first had the gd pointer
volatile qualified [6020faf62c3 ("riscv: nx25: include: Add header
files to support RISC-V")], removed that back in 2018
[40717eb849c ("riscv: checkpatch: Fix use of volatile")], and then in
2020 this helper was added [6b9966e1aa3 ("riscv: define function
set_gd()")] which needlessly had volatile in the prototype.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
The global gd pointer is no longer volatile-qualified. Callers of this
helper function have been updated to no longer use volatile-qualifed
temporary variables, so update the prototype accordingly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
The global gd pointer is no longer volatile-qualified, so drop that
qualifier from these bookkeeping variables.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
The global gd pointer is no longer volatile-qualified, so drop that
qualifier from these bookkeeping variables.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Now that the global gd pointer is no longer volatile-qualified,
there's no reason for the temporary variables used for
saving/restoring it to have that qualifier.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Tested-by: Anshul Dalal <anshuld@ti.com>
|
