summaryrefslogtreecommitdiff
path: root/arch/arc/lib
AgeCommit message (Collapse)Author
2025-03-14treewide: Add a function to change page permissionsIlias Apalodimas
For armv8 we are adding proper page permissions for the relocated U-Boot binary. Add a weak function that can be used across architectures to change the page permissions Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on AML-S905X-CC Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-09-03lmb: do away with arch_lmb_reserve()Sughosh Ganu
All of the current definitions of arch_lmb_reserve() are doing the same thing -- reserve the region of memory occupied by U-Boot, starting from the current stack address to the ram_top. Introduce a function lmb_reserve_uboot_region() which does this, and do away with the arch_lmb_reserve() function. Instead of using the current value of stack pointer for starting the reserved region, have a fixed value, considering the stack size config value. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-09-03lmb: make LMB memory map persistent and globalSughosh Ganu
The current LMB API's for allocating and reserving memory use a per-caller based memory view. Memory allocated by a caller can then be overwritten by another caller. Make these allocations and reservations persistent using the alloced list data structure. Two alloced lists are declared -- one for the available(free) memory, and one for the used memory. Once full, the list can then be extended at runtime. [sjg: Use a stack to store pointer of lmb struct when running lmb tests] Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Signed-off-by: Simon Glass <sjg@chromium.org> [sjg: Optimise the logic to add a region in lmb_add_region_flags()]
2024-05-22include: Move snprintf to stdio.hRaymond Mao
Move snprintf to stdio.h since it is needed by exteranl libraries. Signed-off-by: Raymond Mao <raymond.mao@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-04-18Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE ↵Tom Rini
enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-10Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"Tom Rini
Simon Glass <sjg@chromium.org> says: This series is the culmanation of the current line of refactoring series. It adjusts pxe to call the booting functionality directly rather than going through the command-line interface. With this is is possible to boot using the extlinux bootmeth without the command line enabled. It also updates fastboot to do a similar thing.
2024-04-10treewide: Make arch-specific bootm code depend on BOOTMSimon Glass
Allow these functions to be compiled in when CONFIG_BOOTM is enabled, even if CONFIG_CMD_BOOTM is not. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Angelo Dureghello <angelo@kernel-space.org>
2023-12-21Merge patch series "Complete decoupling of bootm logic from commands"Tom Rini
Simon Glass <sjg@chromium.org> says: This series continues refactoring the bootm code to allow it to be used with CONFIG_COMMAND disabled. The OS-handling code is refactored and a new bootm_run() function is created to run through the bootm stages. This completes the work. A booti_go() function is created also, in case it proves useful, but at last for now standard boot does not use this. This is cmdd (part d of CMDLINE refactoring) It depends on dm/bootstda-working which depends on dm/cmdc-working
2023-12-21bootm: Adjust arguments of boot_os_fnSimon Glass
Adjust boot_os_fn to use struct bootm_info instead of the separate argc, argv and image parameters. Update the handlers accordingly. Few of the functions make use of the arguments, so this improves code size slightly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-12-21arc: Cleanup and audit usage of <config.h>Tom Rini
We need to include <config.h> directly when a file needs to have something such as CFG_SYS_SDRAM_SIZE referenced as this file is not automatically globally included and is most commonly indirectly included via common.h. Remove most cases of arc including config.h directly, but add it where needed. Further clean up the tb100 board config.h file so that we don't rely on config.h being included there for a value used in a single place. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-24arc: Remove common.h usageTom Rini
We can remove common.h from most cases of the code here, and only a few places need an additional header instead. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2023-08-09treewide: unify the linker symbol reference formatShiji Yang
Now all linker symbols are declared as type char[]. Though we can reference the address via both the array name 'var' and its address '&var'. It's better to unify them to avoid confusing developers. This patch converts all '&var' linker symbol refrences to the most commonly used format 'var'. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-09treewide: rework linker symbol declarations in sections headerShiji Yang
1. Convert all linker symbols to char[] type so that we can get the corresponding address by calling array name 'var' or its address '&var'. In this way, we can avoid some potential issues[1]. 2. Remove unused symbol '_TEXT_BASE'. It has been abandoned and has not been referenced by any source code. 3. Move '__data_end' to the arch x86's own sections header as it's only used by x86 arch. 4. Remove some duplicate declared linker symbols. Now we use the standard header file to declare them. [1] This patch fixes the boot failure on MIPS target. Error log: SPL: Image overlaps SPL Fixes: 1b8a1be1a1f1 ("spl: spl_legacy: Fix spl_end address") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-02-10Correct SPL uses of LMBSimon Glass
This converts 9 usages of this option to the non-SPL form, since there is no SPL_LMB defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07arc: Drop CONFIG_MMUSimon Glass
This option is set in the Makefile but has no effect in the assembly code, i.e. the #ifdef branch is never used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-29treewide: Drop bootm_headers_t typedefSimon Glass
This is not needed and we should avoid typedefs. Use the struct instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-26zynqmp: Run board_get_usable_ram_top() only on main U-BootAshok Reddy Soma
With commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location"), the function board_get_usable_ram_top() is allocating MMU_SECTION_SIZE of about 2MB using lmb_alloc(). But we dont have this much memory in case of mini U-Boot. Keep these functions which use lmb under CONFIG_LMB so that they are compiled and used only when LMB is enabled. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/75e52def75f573e554a6b177a78504c128cb0c4a.1657183534.git.michal.simek@amd.com
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27Finish conversion of CONFIG_SYS_CLK_FREQ to KconfigTom Rini
In order to finish moving this symbol to Kconfig for all platforms, we need to do a few more things. First, for all platforms that define this to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h. This entails also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk() and updating a few preprocessor tests. With that done, all platforms that define a value here can be converted to Kconfig, and a fall-back of zero is sufficiently safe to use (and what is used today in cases where code may or may not have this available). Make sure that code which calls this function includes <clock_legacy.h> to get the prototype. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-08image: Drop IMAGE_ENABLE_OF_LIBFDTSimon Glass
Add a host Kconfig for OF_LIBFDT. With this we can use CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the unnecessary indirection. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-23lmb: Switch to generic arch_lmb_reserve_generic()Marek Vasut
Switch arc/arm/m68k/microblaze/mips/ppc arch_lmb_reserve() to arch_lmb_reserve_generic(). Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Hai Pham <hai.pham.ud@renesas.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Wolfgang Denk <wd@denx.de>
2021-09-23lmb: Always compile arch_lmb_reserve() into U-Boot on arcMarek Vasut
The arch_lmb_reserve() is called by lib/lmb.c lmb_reserve_common() even if CMD_BOOTM is not enabled. However, the arc variant of arch_lmb_reserve() is only compiled in if CMD_BOOTM is enabled. This currently does not trigger build error, because there is an empty weak implementation of arch_lmb_reserve(), however that is not the function that should be used on arc. Fix this by moving the arch_lmb_reserve() implementation into common code and always compile it in. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-03-02reset: Remove addr parameter from reset_cpu()Harald Seiler
Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfoOvidiu Panait
Move all assignments to gd->bd->bi_mem{start,size} to generic code in setup_bdinfo. Xtensa architecture is special in this regard as it defines its own handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags. For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is not needed anymore. Also, use gd->ram_base to populate bi_memstart to avoid an ifdef. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Acked-by: Alexey Brodkin <abrokdin@synopsys.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop bootstage.h from common headerSimon Glass
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-27ARC: ARCv2: handle DSP presence in HWEugeniy Paltsev
In case of DSP extension presence in HW some instructions (related to integer multiply, multiply-accumulate, and divide operation) executes on this DSP execution unit. So their execution will depend on dsp configuration register (DSP_CTRL) As we want these instructions to execute the same way regardless of DSP presence we need to set DSP_CTRL properly. NOTE: we do the same adjustments in Linux kernel, see in kernel tree: commit 4827d0cf744e ("ARC: handle DSP presence in HW") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: CACHE: mark IOC helper functions as inlined_cachefuncEugeniy Paltsev
Force inlining of IOC related functions used in other cache functions. This is preventive change. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16ARC: CACHE: add support for SL$ disableEugeniy Paltsev
Since version 3.0 ARC HS supports SL$ (L2 system level cache) disable. So add support for SL$ disable/enable to code. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-01-17common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move interrupt functions into a new headerSimon Glass
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-09-03arc: libgcc: Import __udivdi3 & __udivmoddi4 to allow 64-bit divisionAlexey Brodkin
As reported by Kever here [1] we were unable to compile 64-bit division code due to missing definition of __udivdi3(). Import its implementation and __udivmoddi4() as its direct dependency from today's libgcc [2]. [1] https://patchwork.ozlabs.org/patch/1146845/ [2] https://github.com/gcc-mirror/gcc/commit/5d8723600bc0eed41226b5a6785bc02a053b45d5 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2019-05-18CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-25ARC: Fix iteration in arc_xx_version()Alexey Brodkin
"i" gets incremented before we're entering loop body and effectively we iterate from 1 to 8 instead of 0 to 7. This way we: a) Skip the first line of struct hs_versions b) Go over it and access memory beyond the structure Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03ARC: Improve identification of ARC coresAlexey Brodkin
1. Try to guess a ARC core template that was used i.e. not just name a core family but something more menaingful like "ARC HS38", "ARC EM11D" etc. We do it checking availability of the key differentiation features like: - Caches (we actually only check for L1 I$ fpr simplicity) - XY-memory - DSP extensions etc. 2. Identify ARC subsystems 3. Print core clock frequency Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-12ARC: make generic print_cpuinfo() weakAlexey Brodkin
This allows board to override print_cpuinfo() because they might know better which ARChitect template was used. This way we may not only derive base architecture type and version but more meaningful things like "ARC EM7D" instead of simple "ARC EM", "ARC HS36" instead of "ARC HS". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05ARC: Implement print_cpuinfo()Alexey Brodkin
Once we enable DISPLAY_CPUINFO for ARC we'll see ARC core family and version printed on boot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31ARC: Enable unaligned access in hardware if compiler uses itAlexey Brodkin
Even if ARC core might handle unaligned access to data this hardware feature by default is disabled. But GCC starting from 8.1.0 unconditionally uses it for ARC HS cores. Which leads to quite strange and fatal run-time failures like the one below if HW is not configured properly: | hsdk# sf probe | Misaligned data access exception @ 0xbff794d4 | ECR: 0x000d0000 | RET: 0xbff794d4 | BLINK: 0xbff79644 | STAT32: 0x00000800 | GP: 0x1003e000 r25: 0xbfd58f08 | BTA: 0xbff794a4 SP: 0xbfd58cd4 FP: 0xbfd58ef0 | LPS: 0xbff90240 LPE: 0xbff90244 LPC: 0x00000000 | r00: 0x00000000 r01: 0x00000003 r02: 0x000026bf | r03: 0x00000000 r04: 0x00000100 r05: 0x00000000 | r06: 0x00000001 r07: 0x00000000 r08: 0x1dcd6500 | r09: 0x00000000 r10: 0x00200000 r11: 0x00000000 | r12: 0x1b3d4440 r13: 0xbff9eca4 r14: 0xbfd59d68 | r15: 0xbfd60cd0 r16: 0x00000000 r17: 0x00000000 | r18: 0xbff9ed14 r19: 0xbfd59c78 r20: 0xbfd58d40 | r21: 0xbfd58d44 r22: 0x00000000 r23: 0x00000000 | r24: 0xbfd59ba8 | Resetting CPU ... Now we're checking for __ARC_UNALIGNED__ define emitted by the compiler if it's going to use unaligned access and then we force-enable it in hardware too. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-31ARC: Reset: Implement weak reset_cpu()Alexey Brodkin
This will allow for board-specific implementation of reset. Default version will just stop execution with help of BRK instruction. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-31ARC: Reset: Use __builtin_arc_brk() instead of open-coded ASMAlexey Brodkin
For quite some time we have a GCC's built-in which inserts BRK instruction so let's use it instead of simple insertion of in-line assembly. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-07-20 06:26:31 +0000