| Age | Commit message (Collapse) | Author |
|---|
|
The UART clocks were added around the same time some other clock
updates were happening, so converting clock-osc-24 back to osc_24
was missed on the UART clocks for imx8mm and imx8mn, so update
them here.
Fixes: b4734c9c333b ("clk: imx: Convert clock-osc-* back to osc_*")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reported-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
Pass struct udevice * into imx_clk_fixed_factor*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Pass struct udevice * into imx_clk_divider*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Convert clock-osc-24m back to osc_24m and clock-osc-32k back to osc_32k.
These are the clock which match clock tables in Linux. This is now
possible because the clock drivers now resolve clock names based on
clock-names DT property in the CCM DT node.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Pass struct udevice * into imx_clk_composite*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Pass struct udevice * into imx_clk_gate*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Pass struct udevice * into imx_clk_mux*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
In order to let the serial driver enable the clocks, the UART clocks
must be registered first.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Register ARM A53 core clock for i.MX 8M Mini, Nano and Plus, preparing
for enabling the 'cpu' command, which depends on this to print CPU core
frequency.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
|
|
The arrays containing the mux selectors need to be of const pointer
to const char.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Add support for PCIe clocks required to enable PCIe support on
iMX8MM SoC.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
The QSPI clocks are only used when CONFIG_NXP_FSPI=y, so only build the
QSPI clocks in this case to reduce the final SPL binary size.
Signed-off-by: Fabio Estevam <festevam@denx.de>
|
|
The ecspi clocks are only used when CONFIG_DM_SPI=y, so only build the
ecspi clocks in this case to reduce the final SPL binary size.
Signed-off-by: Fabio Estevam <festevam@denx.de>
|
|
Ethernet is not used inside SPL, so move the IMX8MM_CLK_ENET_AXI clock
inside the non-SPL block to reduce the final SPL binary size.
Signed-off-by: Fabio Estevam <festevam@denx.de>
|
|
PWM is not used inside SPL, so do not define the PWM clocks inside
SPL to reduce the final SPL binary size.
Signed-off-by: Fabio Estevam <festevam@denx.de>
|
|
Re-factor the imx8m[nmpq] rate tables into the common pll1416x clock
driver.
43cdaa1567ad3 ("clk: imx8mm: Move 1443X/1416X PLL clock structure to common place")
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
|
|
Add clocks support for the PWM controllers. This is ported from
Linux v5.17-rc8.
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
|
|
This converts most CCF drivers to use generic ops. imx6q is the only
outlier, where we retain the existing functionality by moving the check to
request().
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220320203446.740178-2-seanga2@gmail.com
[ fixed missing include for at91 ]
Signed-off-by: Sean Anderson <seanga2@gmail.com>
|
|
Add the clocks for the ECSPI controllers. This is ported from
Linux v5.13-rc4.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
|
We use non-dm code to configure the clk settings in order to simplify
dm clk driver in future, so remove the duplicated code from clk driver
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Add USB relevant clocks to support usb clock settings for both
DM USB host and gadget drivers
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Add qspi clock
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Fix clk set parent, so we could still have correct clocks after
parent changing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Move this header out of the common header.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
dev_read_addr_ptr returns NULL on error, not FDT_ADDR_T_NONE.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
|
|
The 24MHz oscillator clock is referenced by "clock-osc-24m" and not
"osc_24m".
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
Add set_parent callback, then assigned-clock-parents in dts could
be work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
|
Add enet ref/timer/PHY_REF/root clk which are required to make enet
function well.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
|
Add i.MX8MM clk driver support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
